diff mbox series

[v1] arm64: dts: qcom: qcm6490-rb3: Enable gpi-dma and qup node

Message ID 20240416105059.1167-1-quic_vdadhani@quicinc.com
State New
Headers show
Series [v1] arm64: dts: qcom: qcm6490-rb3: Enable gpi-dma and qup node | expand

Commit Message

Viken Dadhaniya April 16, 2024, 10:50 a.m. UTC
Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
busses usecase on RB3 platform.

Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Dmitry Baryshkov April 16, 2024, 12:34 p.m. UTC | #1
On Tue, 16 Apr 2024 at 15:32, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Tue, 16 Apr 2024 at 13:51, Viken Dadhaniya <quic_vdadhani@quicinc.com> wrote:
> >
> > Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
> > busses usecase on RB3 platform.
> >
> > Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
> > ---
> >  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
>
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Well, actually:

Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Please place the gpi_dmaN nodes where they belong rather than sticking
them right before the qup nodes. The file should be sorted.
Viken Dadhaniya April 24, 2024, 5:51 a.m. UTC | #2
On 4/16/2024 6:04 PM, Dmitry Baryshkov wrote:
> On Tue, 16 Apr 2024 at 15:32, Dmitry Baryshkov
> <dmitry.baryshkov@linaro.org> wrote:
>>
>> On Tue, 16 Apr 2024 at 13:51, Viken Dadhaniya <quic_vdadhani@quicinc.com> wrote:
>>>
>>> Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
>>> busses usecase on RB3 platform.
>>>
>>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 12 ++++++++++++
>>>   1 file changed, 12 insertions(+)
>>
>>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Well, actually:
> 
> Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> 
> Please place the gpi_dmaN nodes where they belong rather than sticking
> them right before the qup nodes. The file should be sorted.
> 

Updated in v2.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index c98c41f8f3b1..811033592bab 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -603,10 +603,22 @@ 
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/qcs6490/adsp.mbn";
 	status = "okay";