@@ -10,6 +10,7 @@
#include <linux/export.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/io.h>
@@ -82,6 +83,7 @@ enum {
DMI_QUIRK_SD_NO_WRITE_PROTECT = BIT(1),
DMI_QUIRK_SD_NO_1_8_V = BIT(2),
DMI_QUIRK_SD_CD_ACTIVE_HIGH = BIT(3),
+ DMI_QUIRK_SD_CD_ENABLE_PULL_UP = BIT(4),
};
static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c)
@@ -735,6 +737,14 @@ static const struct dmi_system_id sdhci_acpi_quirks[] = {
},
.driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT,
},
+ {
+ /* Asus T100TA, needs pull-up for cd but DSDT GpioInt has NoPull set */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+ },
+ .driver_data = (void *)DMI_QUIRK_SD_CD_ENABLE_PULL_UP,
+ },
{
/*
* The Lenovo Miix 320-10ICR has a bug in the _PS0 method of
@@ -928,6 +938,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
goto err_free;
dev_warn(dev, "failed to setup card detect gpio\n");
c->use_runtime_pm = false;
+ } else if (quirks & DMI_QUIRK_SD_CD_ENABLE_PULL_UP) {
+ mmc_gpiod_set_cd_config(host->mmc,
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 20000));
}
if (quirks & DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP)
The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models stopped working under Linux after commit 6fd03f024828 ("gpiolib: acpi: support bias pull disable"). The GPIO in question is connected to a mechanical switch in the slot which shorts the pin to GND when a card is inserted. The GPIO pin correctly gets configured with a 20K pull-up by the BIOS, but there is a bug in the DSDT where the GpioInt for the card-detect is configured with a PullNone setting: GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x0026 } Linux now actually honors the PullNone setting and disables the 20K pull-up configured by the BIOS. Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for the Asus T100TA models to fix this. Fixes: 6fd03f024828 ("gpiolib: acpi: support bias pull disable") Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Cc: Nuno Sá <nuno.sa@analog.com> --- Changes v2: - Add {} to else if (quirks & DMI_QUIRK_SD_CD_ENABLE_PULL_UP) branch --- drivers/mmc/host/sdhci-acpi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)