deleted file mode 100644
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
-/*
- * This header provides constants for most AHCI bindings.
- */
-
-#ifndef _DT_BINDINGS_ATA_AHCI_H
-#define _DT_BINDINGS_ATA_AHCI_H
-
-/* Host Bus Adapter generic platform capabilities */
-#define HBA_SSS (1 << 27)
-#define HBA_SMPS (1 << 28)
-
-/* Host Bus Adapter port-specific platform capabilities */
-#define HBA_PORT_HPCP (1 << 18)
-#define HBA_PORT_MPSP (1 << 19)
-#define HBA_PORT_CPD (1 << 20)
-#define HBA_PORT_ESP (1 << 21)
-#define HBA_PORT_FBSCP (1 << 22)
-
-#endif
deleted file mode 100644
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for most GPIO bindings.
- *
- * Most GPIO bindings include a flags cell as part of the GPIO specifier.
- * In most cases, the format of the flags cell uses the standard values
- * defined in this header.
- */
-
-#ifndef _DT_BINDINGS_GPIO_GPIO_H
-#define _DT_BINDINGS_GPIO_GPIO_H
-
-/* Bit 0 express polarity */
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
-/* Bit 1 express single-endedness */
-#define GPIO_PUSH_PULL 0
-#define GPIO_SINGLE_ENDED 2
-
-/* Bit 2 express Open drain or open source */
-#define GPIO_LINE_OPEN_SOURCE 0
-#define GPIO_LINE_OPEN_DRAIN 4
-
-/*
- * Open Drain/Collector is the combination of single-ended open drain interface.
- * Open Source/Emitter is the combination of single-ended open source interface.
- */
-#define GPIO_OPEN_DRAIN (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_DRAIN)
-#define GPIO_OPEN_SOURCE (GPIO_SINGLE_ENDED | GPIO_LINE_OPEN_SOURCE)
-
-/* Bit 3 express GPIO suspend/resume and reset persistence */
-#define GPIO_PERSISTENT 0
-#define GPIO_TRANSITORY 8
-
-/* Bit 4 express pull up */
-#define GPIO_PULL_UP 16
-
-/* Bit 5 express pull down */
-#define GPIO_PULL_DOWN 32
-
-#endif
deleted file mode 100644
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for gpio keys bindings.
- */
-
-#ifndef _DT_BINDINGS_GPIO_KEYS_H
-#define _DT_BINDINGS_GPIO_KEYS_H
-
-#define EV_ACT_ANY 0x00 /* asserted or deasserted */
-#define EV_ACT_ASSERTED 0x01 /* asserted */
-#define EV_ACT_DEASSERTED 0x02 /* deasserted */
-
-#endif /* _DT_BINDINGS_GPIO_KEYS_H */
deleted file mode 100644
@@ -1,17 +0,0 @@
-/*
- * This header provides constants for most input bindings.
- *
- * Most input bindings include key code, matrix key code format.
- * In most cases, key code and matrix key code format uses
- * the standard values/macro defined in this header.
- */
-
-#ifndef _DT_BINDINGS_INPUT_INPUT_H
-#define _DT_BINDINGS_INPUT_INPUT_H
-
-#include "linux-event-codes.h"
-
-#define MATRIX_KEY(row, col, code) \
- ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
-
-#endif /* _DT_BINDINGS_INPUT_INPUT_H */
deleted file mode 100644
@@ -1,806 +0,0 @@
-/*
- * Input event codes
- *
- * *** IMPORTANT ***
- * This file is not only included from C-code but also from devicetree source
- * files. As such this file MUST only contain comments and defines.
- *
- * Copyright (c) 1999-2002 Vojtech Pavlik
- * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef _UAPI_INPUT_EVENT_CODES_H
-#define _UAPI_INPUT_EVENT_CODES_H
-
-/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
-#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
-#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
-#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
-#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
-#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
-
-#define INPUT_PROP_MAX 0x1f
-#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN 0x00
-#define EV_KEY 0x01
-#define EV_REL 0x02
-#define EV_ABS 0x03
-#define EV_MSC 0x04
-#define EV_SW 0x05
-#define EV_LED 0x11
-#define EV_SND 0x12
-#define EV_REP 0x14
-#define EV_FF 0x15
-#define EV_PWR 0x16
-#define EV_FF_STATUS 0x17
-#define EV_MAX 0x1f
-#define EV_CNT (EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT 0
-#define SYN_CONFIG 1
-#define SYN_MT_REPORT 2
-#define SYN_DROPPED 3
-#define SYN_MAX 0xf
-#define SYN_CNT (SYN_MAX+1)
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED 0
-#define KEY_ESC 1
-#define KEY_1 2
-#define KEY_2 3
-#define KEY_3 4
-#define KEY_4 5
-#define KEY_5 6
-#define KEY_6 7
-#define KEY_7 8
-#define KEY_8 9
-#define KEY_9 10
-#define KEY_0 11
-#define KEY_MINUS 12
-#define KEY_EQUAL 13
-#define KEY_BACKSPACE 14
-#define KEY_TAB 15
-#define KEY_Q 16
-#define KEY_W 17
-#define KEY_E 18
-#define KEY_R 19
-#define KEY_T 20
-#define KEY_Y 21
-#define KEY_U 22
-#define KEY_I 23
-#define KEY_O 24
-#define KEY_P 25
-#define KEY_LEFTBRACE 26
-#define KEY_RIGHTBRACE 27
-#define KEY_ENTER 28
-#define KEY_LEFTCTRL 29
-#define KEY_A 30
-#define KEY_S 31
-#define KEY_D 32
-#define KEY_F 33
-#define KEY_G 34
-#define KEY_H 35
-#define KEY_J 36
-#define KEY_K 37
-#define KEY_L 38
-#define KEY_SEMICOLON 39
-#define KEY_APOSTROPHE 40
-#define KEY_GRAVE 41
-#define KEY_LEFTSHIFT 42
-#define KEY_BACKSLASH 43
-#define KEY_Z 44
-#define KEY_X 45
-#define KEY_C 46
-#define KEY_V 47
-#define KEY_B 48
-#define KEY_N 49
-#define KEY_M 50
-#define KEY_COMMA 51
-#define KEY_DOT 52
-#define KEY_SLASH 53
-#define KEY_RIGHTSHIFT 54
-#define KEY_KPASTERISK 55
-#define KEY_LEFTALT 56
-#define KEY_SPACE 57
-#define KEY_CAPSLOCK 58
-#define KEY_F1 59
-#define KEY_F2 60
-#define KEY_F3 61
-#define KEY_F4 62
-#define KEY_F5 63
-#define KEY_F6 64
-#define KEY_F7 65
-#define KEY_F8 66
-#define KEY_F9 67
-#define KEY_F10 68
-#define KEY_NUMLOCK 69
-#define KEY_SCROLLLOCK 70
-#define KEY_KP7 71
-#define KEY_KP8 72
-#define KEY_KP9 73
-#define KEY_KPMINUS 74
-#define KEY_KP4 75
-#define KEY_KP5 76
-#define KEY_KP6 77
-#define KEY_KPPLUS 78
-#define KEY_KP1 79
-#define KEY_KP2 80
-#define KEY_KP3 81
-#define KEY_KP0 82
-#define KEY_KPDOT 83
-
-#define KEY_ZENKAKUHANKAKU 85
-#define KEY_102ND 86
-#define KEY_F11 87
-#define KEY_F12 88
-#define KEY_RO 89
-#define KEY_KATAKANA 90
-#define KEY_HIRAGANA 91
-#define KEY_HENKAN 92
-#define KEY_KATAKANAHIRAGANA 93
-#define KEY_MUHENKAN 94
-#define KEY_KPJPCOMMA 95
-#define KEY_KPENTER 96
-#define KEY_RIGHTCTRL 97
-#define KEY_KPSLASH 98
-#define KEY_SYSRQ 99
-#define KEY_RIGHTALT 100
-#define KEY_LINEFEED 101
-#define KEY_HOME 102
-#define KEY_UP 103
-#define KEY_PAGEUP 104
-#define KEY_LEFT 105
-#define KEY_RIGHT 106
-#define KEY_END 107
-#define KEY_DOWN 108
-#define KEY_PAGEDOWN 109
-#define KEY_INSERT 110
-#define KEY_DELETE 111
-#define KEY_MACRO 112
-#define KEY_MUTE 113
-#define KEY_VOLUMEDOWN 114
-#define KEY_VOLUMEUP 115
-#define KEY_POWER 116 /* SC System Power Down */
-#define KEY_KPEQUAL 117
-#define KEY_KPPLUSMINUS 118
-#define KEY_PAUSE 119
-#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA 121
-#define KEY_HANGEUL 122
-#define KEY_HANGUEL KEY_HANGEUL
-#define KEY_HANJA 123
-#define KEY_YEN 124
-#define KEY_LEFTMETA 125
-#define KEY_RIGHTMETA 126
-#define KEY_COMPOSE 127
-
-#define KEY_STOP 128 /* AC Stop */
-#define KEY_AGAIN 129
-#define KEY_PROPS 130 /* AC Properties */
-#define KEY_UNDO 131 /* AC Undo */
-#define KEY_FRONT 132
-#define KEY_COPY 133 /* AC Copy */
-#define KEY_OPEN 134 /* AC Open */
-#define KEY_PASTE 135 /* AC Paste */
-#define KEY_FIND 136 /* AC Search */
-#define KEY_CUT 137 /* AC Cut */
-#define KEY_HELP 138 /* AL Integrated Help Center */
-#define KEY_MENU 139 /* Menu (show menu) */
-#define KEY_CALC 140 /* AL Calculator */
-#define KEY_SETUP 141
-#define KEY_SLEEP 142 /* SC System Sleep */
-#define KEY_WAKEUP 143 /* System Wake Up */
-#define KEY_FILE 144 /* AL Local Machine Browser */
-#define KEY_SENDFILE 145
-#define KEY_DELETEFILE 146
-#define KEY_XFER 147
-#define KEY_PROG1 148
-#define KEY_PROG2 149
-#define KEY_WWW 150 /* AL Internet Browser */
-#define KEY_MSDOS 151
-#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK KEY_COFFEE
-#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */
-#define KEY_DIRECTION KEY_ROTATE_DISPLAY
-#define KEY_CYCLEWINDOWS 154
-#define KEY_MAIL 155
-#define KEY_BOOKMARKS 156 /* AC Bookmarks */
-#define KEY_COMPUTER 157
-#define KEY_BACK 158 /* AC Back */
-#define KEY_FORWARD 159 /* AC Forward */
-#define KEY_CLOSECD 160
-#define KEY_EJECTCD 161
-#define KEY_EJECTCLOSECD 162
-#define KEY_NEXTSONG 163
-#define KEY_PLAYPAUSE 164
-#define KEY_PREVIOUSSONG 165
-#define KEY_STOPCD 166
-#define KEY_RECORD 167
-#define KEY_REWIND 168
-#define KEY_PHONE 169 /* Media Select Telephone */
-#define KEY_ISO 170
-#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE 172 /* AC Home */
-#define KEY_REFRESH 173 /* AC Refresh */
-#define KEY_EXIT 174 /* AC Exit */
-#define KEY_MOVE 175
-#define KEY_EDIT 176
-#define KEY_SCROLLUP 177
-#define KEY_SCROLLDOWN 178
-#define KEY_KPLEFTPAREN 179
-#define KEY_KPRIGHTPAREN 180
-#define KEY_NEW 181 /* AC New */
-#define KEY_REDO 182 /* AC Redo/Repeat */
-
-#define KEY_F13 183
-#define KEY_F14 184
-#define KEY_F15 185
-#define KEY_F16 186
-#define KEY_F17 187
-#define KEY_F18 188
-#define KEY_F19 189
-#define KEY_F20 190
-#define KEY_F21 191
-#define KEY_F22 192
-#define KEY_F23 193
-#define KEY_F24 194
-
-#define KEY_PLAYCD 200
-#define KEY_PAUSECD 201
-#define KEY_PROG3 202
-#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
-#define KEY_SUSPEND 205
-#define KEY_CLOSE 206 /* AC Close */
-#define KEY_PLAY 207
-#define KEY_FASTFORWARD 208
-#define KEY_BASSBOOST 209
-#define KEY_PRINT 210 /* AC Print */
-#define KEY_HP 211
-#define KEY_CAMERA 212
-#define KEY_SOUND 213
-#define KEY_QUESTION 214
-#define KEY_EMAIL 215
-#define KEY_CHAT 216
-#define KEY_SEARCH 217
-#define KEY_CONNECT 218
-#define KEY_FINANCE 219 /* AL Checkbook/Finance */
-#define KEY_SPORT 220
-#define KEY_SHOP 221
-#define KEY_ALTERASE 222
-#define KEY_CANCEL 223 /* AC Cancel */
-#define KEY_BRIGHTNESSDOWN 224
-#define KEY_BRIGHTNESSUP 225
-#define KEY_MEDIA 226
-
-#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
- outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE 228
-#define KEY_KBDILLUMDOWN 229
-#define KEY_KBDILLUMUP 230
-
-#define KEY_SEND 231 /* AC Send */
-#define KEY_REPLY 232 /* AC Reply */
-#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
-#define KEY_SAVE 234 /* AC Save */
-#define KEY_DOCUMENTS 235
-
-#define KEY_BATTERY 236
-
-#define KEY_BLUETOOTH 237
-#define KEY_WLAN 238
-#define KEY_UWB 239
-
-#define KEY_UNKNOWN 240
-
-#define KEY_VIDEO_NEXT 241 /* drive next video source */
-#define KEY_VIDEO_PREV 242 /* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
-#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
- brightness control is off,
- rely on ambient */
-#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
-#define KEY_DISPLAY_OFF 245 /* display device to off state */
-
-#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
-#define KEY_WIMAX KEY_WWAN
-#define KEY_RFKILL 247 /* Key that controls all radios */
-
-#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC 0x100
-#define BTN_0 0x100
-#define BTN_1 0x101
-#define BTN_2 0x102
-#define BTN_3 0x103
-#define BTN_4 0x104
-#define BTN_5 0x105
-#define BTN_6 0x106
-#define BTN_7 0x107
-#define BTN_8 0x108
-#define BTN_9 0x109
-
-#define BTN_MOUSE 0x110
-#define BTN_LEFT 0x110
-#define BTN_RIGHT 0x111
-#define BTN_MIDDLE 0x112
-#define BTN_SIDE 0x113
-#define BTN_EXTRA 0x114
-#define BTN_FORWARD 0x115
-#define BTN_BACK 0x116
-#define BTN_TASK 0x117
-
-#define BTN_JOYSTICK 0x120
-#define BTN_TRIGGER 0x120
-#define BTN_THUMB 0x121
-#define BTN_THUMB2 0x122
-#define BTN_TOP 0x123
-#define BTN_TOP2 0x124
-#define BTN_PINKIE 0x125
-#define BTN_BASE 0x126
-#define BTN_BASE2 0x127
-#define BTN_BASE3 0x128
-#define BTN_BASE4 0x129
-#define BTN_BASE5 0x12a
-#define BTN_BASE6 0x12b
-#define BTN_DEAD 0x12f
-
-#define BTN_GAMEPAD 0x130
-#define BTN_SOUTH 0x130
-#define BTN_A BTN_SOUTH
-#define BTN_EAST 0x131
-#define BTN_B BTN_EAST
-#define BTN_C 0x132
-#define BTN_NORTH 0x133
-#define BTN_X BTN_NORTH
-#define BTN_WEST 0x134
-#define BTN_Y BTN_WEST
-#define BTN_Z 0x135
-#define BTN_TL 0x136
-#define BTN_TR 0x137
-#define BTN_TL2 0x138
-#define BTN_TR2 0x139
-#define BTN_SELECT 0x13a
-#define BTN_START 0x13b
-#define BTN_MODE 0x13c
-#define BTN_THUMBL 0x13d
-#define BTN_THUMBR 0x13e
-
-#define BTN_DIGI 0x140
-#define BTN_TOOL_PEN 0x140
-#define BTN_TOOL_RUBBER 0x141
-#define BTN_TOOL_BRUSH 0x142
-#define BTN_TOOL_PENCIL 0x143
-#define BTN_TOOL_AIRBRUSH 0x144
-#define BTN_TOOL_FINGER 0x145
-#define BTN_TOOL_MOUSE 0x146
-#define BTN_TOOL_LENS 0x147
-#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
-#define BTN_TOUCH 0x14a
-#define BTN_STYLUS 0x14b
-#define BTN_STYLUS2 0x14c
-#define BTN_TOOL_DOUBLETAP 0x14d
-#define BTN_TOOL_TRIPLETAP 0x14e
-#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
-
-#define BTN_WHEEL 0x150
-#define BTN_GEAR_DOWN 0x150
-#define BTN_GEAR_UP 0x151
-
-#define KEY_OK 0x160
-#define KEY_SELECT 0x161
-#define KEY_GOTO 0x162
-#define KEY_CLEAR 0x163
-#define KEY_POWER2 0x164
-#define KEY_OPTION 0x165
-#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME 0x167
-#define KEY_VENDOR 0x168
-#define KEY_ARCHIVE 0x169
-#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
-#define KEY_CHANNEL 0x16b
-#define KEY_FAVORITES 0x16c
-#define KEY_EPG 0x16d
-#define KEY_PVR 0x16e /* Media Select Home */
-#define KEY_MHP 0x16f
-#define KEY_LANGUAGE 0x170
-#define KEY_TITLE 0x171
-#define KEY_SUBTITLE 0x172
-#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
-#define KEY_MODE 0x175
-#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
-#define KEY_PC 0x178 /* Media Select Computer */
-#define KEY_TV 0x179 /* Media Select TV */
-#define KEY_TV2 0x17a /* Media Select Cable */
-#define KEY_VCR 0x17b /* Media Select VCR */
-#define KEY_VCR2 0x17c /* VCR Plus */
-#define KEY_SAT 0x17d /* Media Select Satellite */
-#define KEY_SAT2 0x17e
-#define KEY_CD 0x17f /* Media Select CD */
-#define KEY_TAPE 0x180 /* Media Select Tape */
-#define KEY_RADIO 0x181
-#define KEY_TUNER 0x182 /* Media Select Tuner */
-#define KEY_PLAYER 0x183
-#define KEY_TEXT 0x184
-#define KEY_DVD 0x185 /* Media Select DVD */
-#define KEY_AUX 0x186
-#define KEY_MP3 0x187
-#define KEY_AUDIO 0x188 /* AL Audio Browser */
-#define KEY_VIDEO 0x189 /* AL Movie Browser */
-#define KEY_DIRECTORY 0x18a
-#define KEY_LIST 0x18b
-#define KEY_MEMO 0x18c /* Media Select Messages */
-#define KEY_CALENDAR 0x18d
-#define KEY_RED 0x18e
-#define KEY_GREEN 0x18f
-#define KEY_YELLOW 0x190
-#define KEY_BLUE 0x191
-#define KEY_CHANNELUP 0x192 /* Channel Increment */
-#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
-#define KEY_FIRST 0x194
-#define KEY_LAST 0x195 /* Recall Last */
-#define KEY_AB 0x196
-#define KEY_NEXT 0x197
-#define KEY_RESTART 0x198
-#define KEY_SLOW 0x199
-#define KEY_SHUFFLE 0x19a
-#define KEY_BREAK 0x19b
-#define KEY_PREVIOUS 0x19c
-#define KEY_DIGITS 0x19d
-#define KEY_TEEN 0x19e
-#define KEY_TWEN 0x19f
-#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
-#define KEY_GAMES 0x1a1 /* Media Select Games */
-#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
-#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
-#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
-#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
-#define KEY_EDITOR 0x1a6 /* AL Text Editor */
-#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
-#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
-#define KEY_DATABASE 0x1aa /* AL Database App */
-#define KEY_NEWS 0x1ab /* AL Newsreader */
-#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
-#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
-#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
-#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
-#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
-#define KEY_LOGOFF 0x1b1 /* AL Logoff */
-
-#define KEY_DOLLAR 0x1b2
-#define KEY_EURO 0x1b3
-
-#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
-#define KEY_FRAMEFORWARD 0x1b5
-#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
-#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
-#define KEY_IMAGES 0x1ba /* AL Image Browser */
-
-#define KEY_DEL_EOL 0x1c0
-#define KEY_DEL_EOS 0x1c1
-#define KEY_INS_LINE 0x1c2
-#define KEY_DEL_LINE 0x1c3
-
-#define KEY_FN 0x1d0
-#define KEY_FN_ESC 0x1d1
-#define KEY_FN_F1 0x1d2
-#define KEY_FN_F2 0x1d3
-#define KEY_FN_F3 0x1d4
-#define KEY_FN_F4 0x1d5
-#define KEY_FN_F5 0x1d6
-#define KEY_FN_F6 0x1d7
-#define KEY_FN_F7 0x1d8
-#define KEY_FN_F8 0x1d9
-#define KEY_FN_F9 0x1da
-#define KEY_FN_F10 0x1db
-#define KEY_FN_F11 0x1dc
-#define KEY_FN_F12 0x1dd
-#define KEY_FN_1 0x1de
-#define KEY_FN_2 0x1df
-#define KEY_FN_D 0x1e0
-#define KEY_FN_E 0x1e1
-#define KEY_FN_F 0x1e2
-#define KEY_FN_S 0x1e3
-#define KEY_FN_B 0x1e4
-
-#define KEY_BRL_DOT1 0x1f1
-#define KEY_BRL_DOT2 0x1f2
-#define KEY_BRL_DOT3 0x1f3
-#define KEY_BRL_DOT4 0x1f4
-#define KEY_BRL_DOT5 0x1f5
-#define KEY_BRL_DOT6 0x1f6
-#define KEY_BRL_DOT7 0x1f7
-#define KEY_BRL_DOT8 0x1f8
-#define KEY_BRL_DOT9 0x1f9
-#define KEY_BRL_DOT10 0x1fa
-
-#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
-#define KEY_NUMERIC_1 0x201 /* and other keypads */
-#define KEY_NUMERIC_2 0x202
-#define KEY_NUMERIC_3 0x203
-#define KEY_NUMERIC_4 0x204
-#define KEY_NUMERIC_5 0x205
-#define KEY_NUMERIC_6 0x206
-#define KEY_NUMERIC_7 0x207
-#define KEY_NUMERIC_8 0x208
-#define KEY_NUMERIC_9 0x209
-#define KEY_NUMERIC_STAR 0x20a
-#define KEY_NUMERIC_POUND 0x20b
-#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */
-#define KEY_NUMERIC_B 0x20d
-#define KEY_NUMERIC_C 0x20e
-#define KEY_NUMERIC_D 0x20f
-
-#define KEY_CAMERA_FOCUS 0x210
-#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON 0x213
-#define KEY_TOUCHPAD_OFF 0x214
-
-#define KEY_CAMERA_ZOOMIN 0x215
-#define KEY_CAMERA_ZOOMOUT 0x216
-#define KEY_CAMERA_UP 0x217
-#define KEY_CAMERA_DOWN 0x218
-#define KEY_CAMERA_LEFT 0x219
-#define KEY_CAMERA_RIGHT 0x21a
-
-#define KEY_ATTENDANT_ON 0x21b
-#define KEY_ATTENDANT_OFF 0x21c
-#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
-#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
-
-#define BTN_DPAD_UP 0x220
-#define BTN_DPAD_DOWN 0x221
-#define BTN_DPAD_LEFT 0x222
-#define BTN_DPAD_RIGHT 0x223
-
-#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
-
-#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
-#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
-#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
-#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
-#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
-#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
-#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
-
-#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
-#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
-
-#define KEY_KBDINPUTASSIST_PREV 0x260
-#define KEY_KBDINPUTASSIST_NEXT 0x261
-#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
-#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
-#define KEY_KBDINPUTASSIST_ACCEPT 0x264
-#define KEY_KBDINPUTASSIST_CANCEL 0x265
-
-#define BTN_TRIGGER_HAPPY 0x2c0
-#define BTN_TRIGGER_HAPPY1 0x2c0
-#define BTN_TRIGGER_HAPPY2 0x2c1
-#define BTN_TRIGGER_HAPPY3 0x2c2
-#define BTN_TRIGGER_HAPPY4 0x2c3
-#define BTN_TRIGGER_HAPPY5 0x2c4
-#define BTN_TRIGGER_HAPPY6 0x2c5
-#define BTN_TRIGGER_HAPPY7 0x2c6
-#define BTN_TRIGGER_HAPPY8 0x2c7
-#define BTN_TRIGGER_HAPPY9 0x2c8
-#define BTN_TRIGGER_HAPPY10 0x2c9
-#define BTN_TRIGGER_HAPPY11 0x2ca
-#define BTN_TRIGGER_HAPPY12 0x2cb
-#define BTN_TRIGGER_HAPPY13 0x2cc
-#define BTN_TRIGGER_HAPPY14 0x2cd
-#define BTN_TRIGGER_HAPPY15 0x2ce
-#define BTN_TRIGGER_HAPPY16 0x2cf
-#define BTN_TRIGGER_HAPPY17 0x2d0
-#define BTN_TRIGGER_HAPPY18 0x2d1
-#define BTN_TRIGGER_HAPPY19 0x2d2
-#define BTN_TRIGGER_HAPPY20 0x2d3
-#define BTN_TRIGGER_HAPPY21 0x2d4
-#define BTN_TRIGGER_HAPPY22 0x2d5
-#define BTN_TRIGGER_HAPPY23 0x2d6
-#define BTN_TRIGGER_HAPPY24 0x2d7
-#define BTN_TRIGGER_HAPPY25 0x2d8
-#define BTN_TRIGGER_HAPPY26 0x2d9
-#define BTN_TRIGGER_HAPPY27 0x2da
-#define BTN_TRIGGER_HAPPY28 0x2db
-#define BTN_TRIGGER_HAPPY29 0x2dc
-#define BTN_TRIGGER_HAPPY30 0x2dd
-#define BTN_TRIGGER_HAPPY31 0x2de
-#define BTN_TRIGGER_HAPPY32 0x2df
-#define BTN_TRIGGER_HAPPY33 0x2e0
-#define BTN_TRIGGER_HAPPY34 0x2e1
-#define BTN_TRIGGER_HAPPY35 0x2e2
-#define BTN_TRIGGER_HAPPY36 0x2e3
-#define BTN_TRIGGER_HAPPY37 0x2e4
-#define BTN_TRIGGER_HAPPY38 0x2e5
-#define BTN_TRIGGER_HAPPY39 0x2e6
-#define BTN_TRIGGER_HAPPY40 0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING KEY_MUTE
-#define KEY_MAX 0x2ff
-#define KEY_CNT (KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X 0x00
-#define REL_Y 0x01
-#define REL_Z 0x02
-#define REL_RX 0x03
-#define REL_RY 0x04
-#define REL_RZ 0x05
-#define REL_HWHEEL 0x06
-#define REL_DIAL 0x07
-#define REL_WHEEL 0x08
-#define REL_MISC 0x09
-#define REL_MAX 0x0f
-#define REL_CNT (REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X 0x00
-#define ABS_Y 0x01
-#define ABS_Z 0x02
-#define ABS_RX 0x03
-#define ABS_RY 0x04
-#define ABS_RZ 0x05
-#define ABS_THROTTLE 0x06
-#define ABS_RUDDER 0x07
-#define ABS_WHEEL 0x08
-#define ABS_GAS 0x09
-#define ABS_BRAKE 0x0a
-#define ABS_HAT0X 0x10
-#define ABS_HAT0Y 0x11
-#define ABS_HAT1X 0x12
-#define ABS_HAT1Y 0x13
-#define ABS_HAT2X 0x14
-#define ABS_HAT2Y 0x15
-#define ABS_HAT3X 0x16
-#define ABS_HAT3Y 0x17
-#define ABS_PRESSURE 0x18
-#define ABS_DISTANCE 0x19
-#define ABS_TILT_X 0x1a
-#define ABS_TILT_Y 0x1b
-#define ABS_TOOL_WIDTH 0x1c
-
-#define ABS_VOLUME 0x20
-
-#define ABS_MISC 0x28
-
-#define ABS_MT_SLOT 0x2f /* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
-#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
-#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
-#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
-#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
-#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
-#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
-#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
-
-
-#define ABS_MAX 0x3f
-#define ABS_CNT (ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID 0x00 /* set = lid shut */
-#define SW_TABLET_MODE 0x01 /* set = tablet mode */
-#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
- set = radio enabled */
-#define SW_RADIO SW_RFKILL_ALL /* deprecated */
-#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
-#define SW_DOCK 0x05 /* set = plugged into dock */
-#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
-#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
-#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT 0x0d /* set = inserted */
-#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
-#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
-#define SW_MAX 0x10
-#define SW_CNT (SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL 0x00
-#define MSC_PULSELED 0x01
-#define MSC_GESTURE 0x02
-#define MSC_RAW 0x03
-#define MSC_SCAN 0x04
-#define MSC_TIMESTAMP 0x05
-#define MSC_MAX 0x07
-#define MSC_CNT (MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML 0x00
-#define LED_CAPSL 0x01
-#define LED_SCROLLL 0x02
-#define LED_COMPOSE 0x03
-#define LED_KANA 0x04
-#define LED_SLEEP 0x05
-#define LED_SUSPEND 0x06
-#define LED_MUTE 0x07
-#define LED_MISC 0x08
-#define LED_MAIL 0x09
-#define LED_CHARGING 0x0a
-#define LED_MAX 0x0f
-#define LED_CNT (LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY 0x00
-#define REP_PERIOD 0x01
-#define REP_MAX 0x01
-#define REP_CNT (REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK 0x00
-#define SND_BELL 0x01
-#define SND_TONE 0x02
-#define SND_MAX 0x07
-#define SND_CNT (SND_MAX+1)
-
-#endif
deleted file mode 100644
@@ -1,19 +0,0 @@
-/*
- * This header provides constants for most IRQ bindings.
- *
- * Most IRQ bindings include a flags cell as part of the IRQ specifier.
- * In most cases, the format of the flags cell uses the standard values
- * defined in this header.
- */
-
-#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
-#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
-
-#define IRQ_TYPE_NONE 0
-#define IRQ_TYPE_EDGE_RISING 1
-#define IRQ_TYPE_EDGE_FALLING 2
-#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
-#define IRQ_TYPE_LEVEL_HIGH 4
-#define IRQ_TYPE_LEVEL_LOW 8
-
-#endif
deleted file mode 100644
@@ -1,106 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides macros for the common LEDs device tree bindings.
- *
- * Copyright (C) 2015, Samsung Electronics Co., Ltd.
- * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
- *
- * Copyright (C) 2019 Jacek Anaszewski <jacek.anaszewski@gmail.com>
- * Copyright (C) 2020 Pavel Machek <pavel@ucw.cz>
- */
-
-#ifndef __DT_BINDINGS_LEDS_H
-#define __DT_BINDINGS_LEDS_H
-
-/* External trigger type */
-#define LEDS_TRIG_TYPE_EDGE 0
-#define LEDS_TRIG_TYPE_LEVEL 1
-
-/* Boost modes */
-#define LEDS_BOOST_OFF 0
-#define LEDS_BOOST_ADAPTIVE 1
-#define LEDS_BOOST_FIXED 2
-
-/* Standard LED colors */
-#define LED_COLOR_ID_WHITE 0
-#define LED_COLOR_ID_RED 1
-#define LED_COLOR_ID_GREEN 2
-#define LED_COLOR_ID_BLUE 3
-#define LED_COLOR_ID_AMBER 4
-#define LED_COLOR_ID_VIOLET 5
-#define LED_COLOR_ID_YELLOW 6
-#define LED_COLOR_ID_IR 7
-#define LED_COLOR_ID_MULTI 8 /* For multicolor LEDs */
-#define LED_COLOR_ID_RGB 9 /* For multicolor LEDs that can do arbitrary color,
- so this would include RGBW and similar */
-#define LED_COLOR_ID_PURPLE 10
-#define LED_COLOR_ID_ORANGE 11
-#define LED_COLOR_ID_PINK 12
-#define LED_COLOR_ID_CYAN 13
-#define LED_COLOR_ID_LIME 14
-#define LED_COLOR_ID_MAX 15
-
-/* Standard LED functions */
-/* Keyboard LEDs, usually it would be input4::capslock etc. */
-/* Obsolete equivalent: "shift-key-light" */
-#define LED_FUNCTION_CAPSLOCK "capslock"
-#define LED_FUNCTION_SCROLLLOCK "scrolllock"
-#define LED_FUNCTION_NUMLOCK "numlock"
-/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads),
- "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */
-#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
-
-/* System LEDs, usually found on system body.
- platform::mute (etc) is sometimes seen, :mute would be better */
-#define LED_FUNCTION_POWER "power"
-#define LED_FUNCTION_DISK "disk"
-
-/* Obsolete: "platform:*:charging" (allwinner sun50i) */
-#define LED_FUNCTION_CHARGING "charging"
-/* Used RGB notification LEDs common on phones.
- Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4),
- "lp5523:{r,g,b}" (Nokia N900) */
-#define LED_FUNCTION_STATUS "status"
-
-#define LED_FUNCTION_MICMUTE "micmute"
-#define LED_FUNCTION_MUTE "mute"
-
-/* Used for player LEDs as found on game controllers from e.g. Nintendo, Sony. */
-#define LED_FUNCTION_PLAYER1 "player-1"
-#define LED_FUNCTION_PLAYER2 "player-2"
-#define LED_FUNCTION_PLAYER3 "player-3"
-#define LED_FUNCTION_PLAYER4 "player-4"
-#define LED_FUNCTION_PLAYER5 "player-5"
-
-/* Miscelleaus functions. Use functions above if you can. */
-#define LED_FUNCTION_ACTIVITY "activity"
-#define LED_FUNCTION_ALARM "alarm"
-#define LED_FUNCTION_BACKLIGHT "backlight"
-#define LED_FUNCTION_BLUETOOTH "bluetooth"
-#define LED_FUNCTION_BOOT "boot"
-#define LED_FUNCTION_CPU "cpu"
-#define LED_FUNCTION_DEBUG "debug"
-#define LED_FUNCTION_DISK_ACTIVITY "disk-activity"
-#define LED_FUNCTION_DISK_ERR "disk-err"
-#define LED_FUNCTION_DISK_READ "disk-read"
-#define LED_FUNCTION_DISK_WRITE "disk-write"
-#define LED_FUNCTION_FAULT "fault"
-#define LED_FUNCTION_FLASH "flash"
-#define LED_FUNCTION_HEARTBEAT "heartbeat"
-#define LED_FUNCTION_INDICATOR "indicator"
-#define LED_FUNCTION_LAN "lan"
-#define LED_FUNCTION_MAIL "mail"
-#define LED_FUNCTION_MTD "mtd"
-#define LED_FUNCTION_PANIC "panic"
-#define LED_FUNCTION_PROGRAMMING "programming"
-#define LED_FUNCTION_RX "rx"
-#define LED_FUNCTION_SD "sd"
-#define LED_FUNCTION_STANDBY "standby"
-#define LED_FUNCTION_TORCH "torch"
-#define LED_FUNCTION_TX "tx"
-#define LED_FUNCTION_USB "usb"
-#define LED_FUNCTION_WAN "wan"
-#define LED_FUNCTION_WLAN "wlan"
-#define LED_FUNCTION_WPS "wps"
-
-#endif /* __DT_BINDINGS_LEDS_H */
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This header provides constants for most Multiplexer bindings.
- *
- * Most Multiplexer bindings specify an idle state. In most cases, the
- * the multiplexer can be left as is when idle, and in some cases it can
- * disconnect the input/output and leave the multiplexer in a high
- * impedance state.
- */
-
-#ifndef _DT_BINDINGS_MUX_MUX_H
-#define _DT_BINDINGS_MUX_MUX_H
-
-#define MUX_IDLE_AS_IS (-1)
-#define MUX_IDLE_DISCONNECT (-2)
-
-#endif
deleted file mode 100644
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *
- * This header provides constants for the phy framework
- *
- * Copyright (C) 2014 STMicroelectronics
- * Author: Gabriel Fernandez <gabriel.fernandez@st.com>
- */
-
-#ifndef _DT_BINDINGS_PHY
-#define _DT_BINDINGS_PHY
-
-#define PHY_NONE 0
-#define PHY_TYPE_SATA 1
-#define PHY_TYPE_PCIE 2
-#define PHY_TYPE_USB2 3
-#define PHY_TYPE_USB3 4
-#define PHY_TYPE_UFS 5
-#define PHY_TYPE_DP 6
-#define PHY_TYPE_XPCS 7
-#define PHY_TYPE_SGMII 8
-#define PHY_TYPE_QSGMII 9
-#define PHY_TYPE_DPHY 10
-#define PHY_TYPE_CPHY 11
-
-#endif /* _DT_BINDINGS_PHY */
deleted file mode 100644
@@ -1,14 +0,0 @@
-/*
- * This header provides constants for most PWM bindings.
- *
- * Most PWM bindings can include a flags cell as part of the PWM specifier.
- * In most cases, the format of the flags cell uses the standard values
- * defined in this header.
- */
-
-#ifndef _DT_BINDINGS_PWM_PWM_H
-#define _DT_BINDINGS_PWM_PWM_H
-
-#define PWM_POLARITY_INVERTED (1 << 0)
-
-#endif
deleted file mode 100644
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
- */
-#ifndef __DT_BINDINGS_SPMI_H
-#define __DT_BINDINGS_SPMI_H
-
-#define SPMI_USID 0
-#define SPMI_GSID 1
-
-#endif
deleted file mode 100644
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * This header provides constants for most thermal bindings.
- *
- * Copyright (C) 2013 Texas Instruments
- * Eduardo Valentin <eduardo.valentin@ti.com>
- */
-
-#ifndef _DT_BINDINGS_THERMAL_THERMAL_H
-#define _DT_BINDINGS_THERMAL_THERMAL_H
-
-/* On cooling devices upper and lower limits */
-#define THERMAL_NO_LIMIT (~0)
-
-#endif
deleted file mode 100644
@@ -1,88 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_POWER_DELIVERY_H
-#define __DT_POWER_DELIVERY_H
-
-/* Power delivery Power Data Object definitions */
-#define PDO_TYPE_FIXED 0
-#define PDO_TYPE_BATT 1
-#define PDO_TYPE_VAR 2
-#define PDO_TYPE_APDO 3
-
-#define PDO_TYPE_SHIFT 30
-#define PDO_TYPE_MASK 0x3
-
-#define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT)
-
-#define PDO_VOLT_MASK 0x3ff
-#define PDO_CURR_MASK 0x3ff
-#define PDO_PWR_MASK 0x3ff
-
-#define PDO_FIXED_DUAL_ROLE (1 << 29) /* Power role swap supported */
-#define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */
-#define PDO_FIXED_HIGHER_CAP (1 << 28) /* Requires more than vSafe5V (Sink) */
-#define PDO_FIXED_EXTPOWER (1 << 27) /* Externally powered */
-#define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */
-#define PDO_FIXED_DATA_SWAP (1 << 25) /* Data role swap supported */
-#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */
-#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */
-
-#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT)
-#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT)
-
-#define PDO_FIXED(mv, ma, flags) \
- (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \
- PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma))
-
-#define VSAFE5V 5000 /* mv units */
-
-#define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */
-#define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */
-#define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */
-
-#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT)
-#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT)
-#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT)
-
-#define PDO_BATT(min_mv, max_mv, max_mw) \
- (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \
- PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw))
-
-#define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */
-#define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */
-#define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */
-
-#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT)
-#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT)
-#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT)
-
-#define PDO_VAR(min_mv, max_mv, max_ma) \
- (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \
- PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma))
-
-#define APDO_TYPE_PPS 0
-
-#define PDO_APDO_TYPE_SHIFT 28 /* Only valid value currently is 0x0 - PPS */
-#define PDO_APDO_TYPE_MASK 0x3
-
-#define PDO_APDO_TYPE(t) ((t) << PDO_APDO_TYPE_SHIFT)
-
-#define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 /* 100mV units */
-#define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 /* 100mV units */
-#define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */
-
-#define PDO_PPS_APDO_VOLT_MASK 0xff
-#define PDO_PPS_APDO_CURR_MASK 0x7f
-
-#define PDO_PPS_APDO_MIN_VOLT(mv) \
- ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT)
-#define PDO_PPS_APDO_MAX_VOLT(mv) \
- ((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT)
-#define PDO_PPS_APDO_MAX_CURR(ma) \
- ((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT)
-
-#define PDO_PPS_APDO(min_mv, max_mv, max_ma) \
- (PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TYPE(APDO_TYPE_PPS) | \
- PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_PPS_APDO_MAX_VOLT(max_mv) | \
- PDO_PPS_APDO_MAX_CURR(max_ma))
-
- #endif /* __DT_POWER_DELIVERY_H */
Drop all the subsystem headers that are compatible with the headers in dts/upstream. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- include/dt-bindings/ata/ahci.h | 20 - include/dt-bindings/gpio/gpio.h | 42 -- include/dt-bindings/input/gpio-keys.h | 13 - include/dt-bindings/input/input.h | 17 - include/dt-bindings/input/linux-event-codes.h | 806 ------------------------- include/dt-bindings/interrupt-controller/irq.h | 19 - include/dt-bindings/leds/common.h | 106 ---- include/dt-bindings/mux/mux.h | 17 - include/dt-bindings/phy/phy.h | 26 - include/dt-bindings/pwm/pwm.h | 14 - include/dt-bindings/spmi/spmi.h | 10 - include/dt-bindings/thermal/thermal.h | 15 - include/dt-bindings/usb/pd.h | 88 --- 13 files changed, 1193 deletions(-)