diff mbox series

[3/4] arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: add USB-C orientation GPIOs

Message ID 20240408-hdk-orientation-gpios-v1-3-8064ba43e52a@linaro.org
State Superseded
Headers show
Series arm64: dts: qcom: add USB-C orientation GPIOs | expand

Commit Message

Dmitry Baryshkov April 8, 2024, 2:34 a.m. UTC
Define the USB-C orientation GPIOs so that the USB-C ports orientation
is known without having to resort to the altmode notifications.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 2 ++
 1 file changed, 2 insertions(+)

Comments

Konrad Dybcio April 8, 2024, 2:26 p.m. UTC | #1
On 4/8/24 04:34, Dmitry Baryshkov wrote:
> Define the USB-C orientation GPIOs so that the USB-C ports orientation
> is known without having to resort to the altmode notifications.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 15ae94c1602d..2806aa8ec497 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -100,6 +100,8 @@ pmic-glink {
>   
>   		#address-cells = <1>;
>   		#size-cells = <0>;
> +		orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 49 GPIO_ACTIVE_HIGH>;

These numbers do check out

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 15ae94c1602d..2806aa8ec497 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -100,6 +100,8 @@  pmic-glink {
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 49 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";