diff mbox series

[1/2] phy: qcom: add Synopsys eUSB2 PHY driver

Message ID 20240405-topic-sm8x50-usb-phy-v1-1-8a8604bf818f@linaro.org
State Superseded
Headers show
Series phy: qcom: add support for the Qualcomm Synopsys eUSB2 PHY | expand

Commit Message

Neil Armstrong April 5, 2024, 8:35 a.m. UTC
Add a driver for the new Synopsys eUSB2 PHY found in the SM8550
and SM8650 SoCs.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/phy/qcom/Kconfig               |   8 +
 drivers/phy/qcom/Makefile              |   1 +
 drivers/phy/qcom/phy-qcom-snps-eusb2.c | 365 +++++++++++++++++++++++++++++++++
 3 files changed, 374 insertions(+)

Comments

Neil Armstrong April 5, 2024, 9:25 a.m. UTC | #1
On 05/04/2024 10:35, Neil Armstrong wrote:
> Add a driver for the new Synopsys eUSB2 PHY found in the SM8550
> and SM8650 SoCs.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>   drivers/phy/qcom/Kconfig               |   8 +
>   drivers/phy/qcom/Makefile              |   1 +
>   drivers/phy/qcom/phy-qcom-snps-eusb2.c | 365 +++++++++++++++++++++++++++++++++
>   3 files changed, 374 insertions(+)
> 
> diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
> index b9fe608c279..3aae1813352 100644
> --- a/drivers/phy/qcom/Kconfig
> +++ b/drivers/phy/qcom/Kconfig
> @@ -27,6 +27,14 @@ config PHY_QCOM_USB_SNPS_FEMTO_V2
>   	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
>   	  is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
>   
> +config PHY_QCOM_SNPS_EUSB2
> +	tristate "Qualcomm Synopsys eUSB2 High-Speed PHY"
> +	depends on PHY && ARCH_SNAPDRAGON
> +	help
> +	  Enable this to support the Qualcomm Synopsys DesignWare eUSB2
> +	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
> +	  is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
> +
>   config PHY_QCOM_USB_HS_28NM
>   	tristate "Qualcomm 28nm High-Speed PHY"
>   	depends on PHY && ARCH_SNAPDRAGON
> diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
> index 5f4db4a5378..a5153061dfb 100644
> --- a/drivers/phy/qcom/Makefile
> +++ b/drivers/phy/qcom/Makefile
> @@ -2,5 +2,6 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
>   obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
>   obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
>   obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o
> +obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o
>   obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
>   obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
> diff --git a/drivers/phy/qcom/phy-qcom-snps-eusb2.c b/drivers/phy/qcom/phy-qcom-snps-eusb2.c
> new file mode 100644
> index 00000000000..853b88458b7
> --- /dev/null
> +++ b/drivers/phy/qcom/phy-qcom-snps-eusb2.c
> @@ -0,0 +1,365 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023-2024, Linaro Limited
> + *
> + * Based on the Linux phy-qcom-snps-eusb2.c driver
> + */
> +
> +#include <clk.h>
> +#include <clk-uclass.h>
> +#include <dm.h>
> +#include <dm/device_compat.h>
> +#include <dm/devres.h>
> +#include <generic-phy.h>
> +#include <malloc.h>
> +#include <reset.h>
> +
> +#include <asm/io.h>
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +
> +#define USB_PHY_UTMI_CTRL0		(0x3c)
> +#define SLEEPM				BIT(0)
> +#define OPMODE_MASK			GENMASK(4, 3)
> +#define OPMODE_NONDRIVING		BIT(3)
> +
> +#define USB_PHY_UTMI_CTRL5		(0x50)
> +#define POR				BIT(1)
> +
> +#define USB_PHY_HS_PHY_CTRL_COMMON0	(0x54)
> +#define PHY_ENABLE			BIT(0)
> +#define SIDDQ_SEL			BIT(1)
> +#define SIDDQ				BIT(2)
> +#define RETENABLEN			BIT(3)
> +#define FSEL_MASK			GENMASK(6, 4)
> +#define FSEL_19_2_MHZ_VAL		(0x0)
> +#define FSEL_38_4_MHZ_VAL		(0x4)
> +
> +#define USB_PHY_CFG_CTRL_1		(0x58)
> +#define PHY_CFG_PLL_CPBIAS_CNTRL_MASK	GENMASK(7, 1)
> +
> +#define USB_PHY_CFG_CTRL_2		(0x5c)
> +#define PHY_CFG_PLL_FB_DIV_7_0_MASK	GENMASK(7, 0)
> +#define DIV_7_0_19_2_MHZ_VAL		(0x90)
> +#define DIV_7_0_38_4_MHZ_VAL		(0xc8)
> +
> +#define USB_PHY_CFG_CTRL_3		(0x60)
> +#define PHY_CFG_PLL_FB_DIV_11_8_MASK	GENMASK(3, 0)
> +#define DIV_11_8_19_2_MHZ_VAL		(0x1)
> +#define DIV_11_8_38_4_MHZ_VAL		(0x0)
> +
> +#define PHY_CFG_PLL_REF_DIV		GENMASK(7, 4)
> +#define PLL_REF_DIV_VAL			(0x0)
> +
> +#define USB_PHY_HS_PHY_CTRL2		(0x64)
> +#define VBUSVLDEXT0			BIT(0)
> +#define USB2_SUSPEND_N			BIT(2)
> +#define USB2_SUSPEND_N_SEL		BIT(3)
> +#define VBUS_DET_EXT_SEL		BIT(4)
> +
> +#define USB_PHY_CFG_CTRL_4		(0x68)
> +#define PHY_CFG_PLL_GMP_CNTRL_MASK	GENMASK(1, 0)
> +#define PHY_CFG_PLL_INT_CNTRL_MASK	GENMASK(7, 2)
> +
> +#define USB_PHY_CFG_CTRL_5		(0x6c)
> +#define PHY_CFG_PLL_PROP_CNTRL_MASK	GENMASK(4, 0)
> +#define PHY_CFG_PLL_VREF_TUNE_MASK	GENMASK(7, 6)
> +
> +#define USB_PHY_CFG_CTRL_6		(0x70)
> +#define PHY_CFG_PLL_VCO_CNTRL_MASK	GENMASK(2, 0)
> +
> +#define USB_PHY_CFG_CTRL_7		(0x74)
> +
> +#define USB_PHY_CFG_CTRL_8		(0x78)
> +#define PHY_CFG_TX_FSLS_VREF_TUNE_MASK	GENMASK(1, 0)
> +#define PHY_CFG_TX_FSLS_VREG_BYPASS	BIT(2)
> +#define PHY_CFG_TX_HS_VREF_TUNE_MASK	GENMASK(5, 3)
> +#define PHY_CFG_TX_HS_XV_TUNE_MASK	GENMASK(7, 6)
> +
> +#define USB_PHY_CFG_CTRL_9		(0x7c)
> +#define PHY_CFG_TX_PREEMP_TUNE_MASK	GENMASK(2, 0)
> +#define PHY_CFG_TX_RES_TUNE_MASK	GENMASK(4, 3)
> +#define PHY_CFG_TX_RISE_TUNE_MASK	GENMASK(6, 5)
> +#define PHY_CFG_RCAL_BYPASS		BIT(7)
> +
> +#define USB_PHY_CFG_CTRL_10		(0x80)
> +
> +#define USB_PHY_CFG0			(0x94)
> +#define DATAPATH_CTRL_OVERRIDE_EN	BIT(0)
> +#define CMN_CTRL_OVERRIDE_EN		BIT(1)
> +
> +#define UTMI_PHY_CMN_CTRL0		(0x98)
> +#define TESTBURNIN			BIT(6)
> +
> +#define USB_PHY_FSEL_SEL		(0xb8)
> +#define FSEL_SEL			BIT(0)
> +
> +#define USB_PHY_APB_ACCESS_CMD		(0x130)
> +#define RW_ACCESS			BIT(0)
> +#define APB_START_CMD			BIT(1)
> +#define APB_LOGIC_RESET			BIT(2)
> +
> +#define USB_PHY_APB_ACCESS_STATUS	(0x134)
> +#define ACCESS_DONE			BIT(0)
> +#define TIMED_OUT			BIT(1)
> +#define ACCESS_ERROR			BIT(2)
> +#define ACCESS_IN_PROGRESS		BIT(3)
> +
> +#define USB_PHY_APB_ADDRESS		(0x138)
> +#define APB_REG_ADDR_MASK		GENMASK(7, 0)
> +
> +#define USB_PHY_APB_WRDATA_LSB		(0x13c)
> +#define APB_REG_WRDATA_7_0_MASK		GENMASK(3, 0)
> +
> +#define USB_PHY_APB_WRDATA_MSB		(0x140)
> +#define APB_REG_WRDATA_15_8_MASK	GENMASK(7, 4)
> +
> +#define USB_PHY_APB_RDDATA_LSB		(0x144)
> +#define APB_REG_RDDATA_7_0_MASK		GENMASK(3, 0)
> +
> +#define USB_PHY_APB_RDDATA_MSB		(0x148)
> +#define APB_REG_RDDATA_15_8_MASK	GENMASK(7, 4)
> +
> +struct qcom_snps_eusb2_phy_priv {
> +	void __iomem *base;
> +	struct clk *ref_clk;
> +	struct reset_ctl_bulk resets;
> +};
> +
> +static void qcom_snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset,
> +					     u32 mask, u32 val)
> +{
> +	u32 reg;
> +
> +	reg = readl_relaxed(base + offset);
> +	reg &= ~mask;
> +	reg |= val & mask;
> +	writel_relaxed(reg, base + offset);
> +
> +	/* Ensure above write is completed */
> +	readl_relaxed(base + offset);
> +}
> +
> +static void qcom_eusb2_default_parameters(struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2)
> +{
> +	/* default parameters: tx pre-emphasis */
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
> +					 PHY_CFG_TX_PREEMP_TUNE_MASK,
> +					 FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0));
> +
> +	/* tx rise/fall time */
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
> +					 PHY_CFG_TX_RISE_TUNE_MASK,
> +					 FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2));
> +
> +	/* source impedance adjustment */
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
> +					 PHY_CFG_TX_RES_TUNE_MASK,
> +					 FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1));
> +
> +	/* dc voltage level adjustement */
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_8,
> +					 PHY_CFG_TX_HS_VREF_TUNE_MASK,
> +					 FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3));
> +
> +	/* transmitter HS crossover adjustement */
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_8,
> +					 PHY_CFG_TX_HS_XV_TUNE_MASK,
> +					 FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0));
> +}
> +
> +static int qcom_eusb2_ref_clk_init(struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2)
> +{
> +	unsigned long ref_clk_freq = clk_get_rate(qcom_snps_eusb2->ref_clk);
> +
> +	switch (ref_clk_freq) {
> +	case 19200000:
> +		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
> +						 FSEL_MASK,
> +						 FIELD_PREP(FSEL_MASK, FSEL_19_2_MHZ_VAL));
> +
> +		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_2,
> +						 PHY_CFG_PLL_FB_DIV_7_0_MASK,
> +						 DIV_7_0_19_2_MHZ_VAL);
> +
> +		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
> +						 PHY_CFG_PLL_FB_DIV_11_8_MASK,
> +						 DIV_11_8_19_2_MHZ_VAL);
> +		break;
> +
> +	case 38400000:
> +		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
> +						 FSEL_MASK,
> +						 FIELD_PREP(FSEL_MASK, FSEL_38_4_MHZ_VAL));
> +
> +		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_2,
> +						 PHY_CFG_PLL_FB_DIV_7_0_MASK,
> +						 DIV_7_0_38_4_MHZ_VAL);
> +
> +		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
> +						 PHY_CFG_PLL_FB_DIV_11_8_MASK,
> +						 DIV_11_8_38_4_MHZ_VAL);
> +		break;
> +
> +	default:
> +		printf("%s: unsupported ref_clk_freq:%lu\n", __func__, ref_clk_freq);
> +		return -EINVAL;
> +	}
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
> +					 PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL);
> +
> +	return 0;
> +}
> +
> +static int qcom_snps_eusb2_usb_init(struct phy *phy)
> +{
> +	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
> +	int ret;
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG0,
> +					 CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL5, POR, POR);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
> +					 PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_APB_ACCESS_CMD,
> +					 APB_LOGIC_RESET, APB_LOGIC_RESET);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_FSEL_SEL,
> +					 FSEL_SEL, FSEL_SEL);
> +
> +	/* update ref_clk related registers */
> +	ret = qcom_eusb2_ref_clk_init(qcom_snps_eusb2);
> +	if (ret)
> +		return ret;
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_1,
> +					 PHY_CFG_PLL_CPBIAS_CNTRL_MASK,
> +					 FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1));
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_4,
> +					 PHY_CFG_PLL_INT_CNTRL_MASK,
> +					 FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8));
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_4,
> +					 PHY_CFG_PLL_GMP_CNTRL_MASK,
> +					 FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1));
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_5,
> +					 PHY_CFG_PLL_PROP_CNTRL_MASK,
> +					 FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10));
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_6,
> +					 PHY_CFG_PLL_VCO_CNTRL_MASK,
> +					 FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0));
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_5,
> +					 PHY_CFG_PLL_VREF_TUNE_MASK,
> +					 FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1));
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
> +					 VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL);
> +
> +	/* set default parameters */
> +	qcom_eusb2_default_parameters(qcom_snps_eusb2);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
> +					 USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
> +					 USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
> +					 SIDDQ_SEL, SIDDQ_SEL);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
> +					 SIDDQ, 0);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL5, POR, 0);
> +
> +	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
> +					 USB2_SUSPEND_N_SEL, 0);
> +
> +	return 0;
> +}
> +
> +static int qcom_snps_eusb2_phy_power_on(struct phy *phy)
> +{
> +	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
> +	int ret;
> +
> +	/* TODO Repeater */
> +
> +	clk_prepare_enable(qcom_snps_eusb2->ref_clk);
> +
> +	ret = reset_deassert_bulk(&qcom_snps_eusb2->resets);
> +	if (ret)
> +		return ret;
> +
> +	ret = qcom_snps_eusb2_usb_init(phy);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int qcom_snps_eusb2_phy_power_off(struct phy *phy)
> +{
> +	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
> +
> +	reset_assert_bulk(&qcom_snps_eusb2->resets);
> +	clk_disable_unprepare(qcom_snps_eusb2->ref_clk);
> +
> +	return 0;
> +}
> +
> +static int qcom_snps_eusb2_phy_probe(struct udevice *dev)
> +{
> +	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(dev);
> +	int ret;
> +
> +	qcom_snps_eusb2->base = (void __iomem *)dev_read_addr(dev);
> +	if (IS_ERR(qcom_snps_eusb2->base))
> +		return PTR_ERR(qcom_snps_eusb2->base);
> +
> +	qcom_snps_eusb2->ref_clk = devm_clk_get(dev, "ref");
> +	if (IS_ERR(qcom_snps_eusb2->ref_clk)) {
> +		printf("%s: failed to get ref clk %d\n", __func__, ret);
> +		return PTR_ERR(qcom_snps_eusb2->ref_clk);
> +	}
> +
> +	ret = reset_get_bulk(dev, &qcom_snps_eusb2->resets);
> +	if (ret < 0) {
> +		printf("failed to get resets, ret = %d\n", ret);
> +		return ret;

missing }

Will send a v2 after a few days.

Neil

> +
> +	return 0;
> +}
> +
> +static struct phy_ops qcom_snps_eusb2_phy_ops = {
> +	.power_on = qcom_snps_eusb2_phy_power_on,
> +	.power_off = qcom_snps_eusb2_phy_power_off,
> +};
> +
> +static const struct udevice_id qcom_snps_eusb2_phy_ids[] = {
> +	{
> +		.compatible = "qcom,sm8550-snps-eusb2-phy",
> +	},
> +	{}
> +};
> +
> +U_BOOT_DRIVER(qcom_usb_qcom_snps_eusb2) = {
> +	.name = "qcom-snps-eusb2-hsphy",
> +	.id = UCLASS_PHY,
> +	.of_match = qcom_snps_eusb2_phy_ids,
> +	.ops = &qcom_snps_eusb2_phy_ops,
> +	.probe = qcom_snps_eusb2_phy_probe,
> +	.priv_auto = sizeof(struct qcom_snps_eusb2_phy_priv),
> +};
>
diff mbox series

Patch

diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
index b9fe608c279..3aae1813352 100644
--- a/drivers/phy/qcom/Kconfig
+++ b/drivers/phy/qcom/Kconfig
@@ -27,6 +27,14 @@  config PHY_QCOM_USB_SNPS_FEMTO_V2
 	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
 	  is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
 
+config PHY_QCOM_SNPS_EUSB2
+	tristate "Qualcomm Synopsys eUSB2 High-Speed PHY"
+	depends on PHY && ARCH_SNAPDRAGON
+	help
+	  Enable this to support the Qualcomm Synopsys DesignWare eUSB2
+	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
+	  is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
+
 config PHY_QCOM_USB_HS_28NM
 	tristate "Qualcomm 28nm High-Speed PHY"
 	depends on PHY && ARCH_SNAPDRAGON
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
index 5f4db4a5378..a5153061dfb 100644
--- a/drivers/phy/qcom/Makefile
+++ b/drivers/phy/qcom/Makefile
@@ -2,5 +2,6 @@  obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
 obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
 obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o
+obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o
 obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
 obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
diff --git a/drivers/phy/qcom/phy-qcom-snps-eusb2.c b/drivers/phy/qcom/phy-qcom-snps-eusb2.c
new file mode 100644
index 00000000000..853b88458b7
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-snps-eusb2.c
@@ -0,0 +1,365 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023-2024, Linaro Limited
+ *
+ * Based on the Linux phy-qcom-snps-eusb2.c driver
+ */
+
+#include <clk.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <reset.h>
+
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+
+#define USB_PHY_UTMI_CTRL0		(0x3c)
+#define SLEEPM				BIT(0)
+#define OPMODE_MASK			GENMASK(4, 3)
+#define OPMODE_NONDRIVING		BIT(3)
+
+#define USB_PHY_UTMI_CTRL5		(0x50)
+#define POR				BIT(1)
+
+#define USB_PHY_HS_PHY_CTRL_COMMON0	(0x54)
+#define PHY_ENABLE			BIT(0)
+#define SIDDQ_SEL			BIT(1)
+#define SIDDQ				BIT(2)
+#define RETENABLEN			BIT(3)
+#define FSEL_MASK			GENMASK(6, 4)
+#define FSEL_19_2_MHZ_VAL		(0x0)
+#define FSEL_38_4_MHZ_VAL		(0x4)
+
+#define USB_PHY_CFG_CTRL_1		(0x58)
+#define PHY_CFG_PLL_CPBIAS_CNTRL_MASK	GENMASK(7, 1)
+
+#define USB_PHY_CFG_CTRL_2		(0x5c)
+#define PHY_CFG_PLL_FB_DIV_7_0_MASK	GENMASK(7, 0)
+#define DIV_7_0_19_2_MHZ_VAL		(0x90)
+#define DIV_7_0_38_4_MHZ_VAL		(0xc8)
+
+#define USB_PHY_CFG_CTRL_3		(0x60)
+#define PHY_CFG_PLL_FB_DIV_11_8_MASK	GENMASK(3, 0)
+#define DIV_11_8_19_2_MHZ_VAL		(0x1)
+#define DIV_11_8_38_4_MHZ_VAL		(0x0)
+
+#define PHY_CFG_PLL_REF_DIV		GENMASK(7, 4)
+#define PLL_REF_DIV_VAL			(0x0)
+
+#define USB_PHY_HS_PHY_CTRL2		(0x64)
+#define VBUSVLDEXT0			BIT(0)
+#define USB2_SUSPEND_N			BIT(2)
+#define USB2_SUSPEND_N_SEL		BIT(3)
+#define VBUS_DET_EXT_SEL		BIT(4)
+
+#define USB_PHY_CFG_CTRL_4		(0x68)
+#define PHY_CFG_PLL_GMP_CNTRL_MASK	GENMASK(1, 0)
+#define PHY_CFG_PLL_INT_CNTRL_MASK	GENMASK(7, 2)
+
+#define USB_PHY_CFG_CTRL_5		(0x6c)
+#define PHY_CFG_PLL_PROP_CNTRL_MASK	GENMASK(4, 0)
+#define PHY_CFG_PLL_VREF_TUNE_MASK	GENMASK(7, 6)
+
+#define USB_PHY_CFG_CTRL_6		(0x70)
+#define PHY_CFG_PLL_VCO_CNTRL_MASK	GENMASK(2, 0)
+
+#define USB_PHY_CFG_CTRL_7		(0x74)
+
+#define USB_PHY_CFG_CTRL_8		(0x78)
+#define PHY_CFG_TX_FSLS_VREF_TUNE_MASK	GENMASK(1, 0)
+#define PHY_CFG_TX_FSLS_VREG_BYPASS	BIT(2)
+#define PHY_CFG_TX_HS_VREF_TUNE_MASK	GENMASK(5, 3)
+#define PHY_CFG_TX_HS_XV_TUNE_MASK	GENMASK(7, 6)
+
+#define USB_PHY_CFG_CTRL_9		(0x7c)
+#define PHY_CFG_TX_PREEMP_TUNE_MASK	GENMASK(2, 0)
+#define PHY_CFG_TX_RES_TUNE_MASK	GENMASK(4, 3)
+#define PHY_CFG_TX_RISE_TUNE_MASK	GENMASK(6, 5)
+#define PHY_CFG_RCAL_BYPASS		BIT(7)
+
+#define USB_PHY_CFG_CTRL_10		(0x80)
+
+#define USB_PHY_CFG0			(0x94)
+#define DATAPATH_CTRL_OVERRIDE_EN	BIT(0)
+#define CMN_CTRL_OVERRIDE_EN		BIT(1)
+
+#define UTMI_PHY_CMN_CTRL0		(0x98)
+#define TESTBURNIN			BIT(6)
+
+#define USB_PHY_FSEL_SEL		(0xb8)
+#define FSEL_SEL			BIT(0)
+
+#define USB_PHY_APB_ACCESS_CMD		(0x130)
+#define RW_ACCESS			BIT(0)
+#define APB_START_CMD			BIT(1)
+#define APB_LOGIC_RESET			BIT(2)
+
+#define USB_PHY_APB_ACCESS_STATUS	(0x134)
+#define ACCESS_DONE			BIT(0)
+#define TIMED_OUT			BIT(1)
+#define ACCESS_ERROR			BIT(2)
+#define ACCESS_IN_PROGRESS		BIT(3)
+
+#define USB_PHY_APB_ADDRESS		(0x138)
+#define APB_REG_ADDR_MASK		GENMASK(7, 0)
+
+#define USB_PHY_APB_WRDATA_LSB		(0x13c)
+#define APB_REG_WRDATA_7_0_MASK		GENMASK(3, 0)
+
+#define USB_PHY_APB_WRDATA_MSB		(0x140)
+#define APB_REG_WRDATA_15_8_MASK	GENMASK(7, 4)
+
+#define USB_PHY_APB_RDDATA_LSB		(0x144)
+#define APB_REG_RDDATA_7_0_MASK		GENMASK(3, 0)
+
+#define USB_PHY_APB_RDDATA_MSB		(0x148)
+#define APB_REG_RDDATA_15_8_MASK	GENMASK(7, 4)
+
+struct qcom_snps_eusb2_phy_priv {
+	void __iomem *base;
+	struct clk *ref_clk;
+	struct reset_ctl_bulk resets;
+};
+
+static void qcom_snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset,
+					     u32 mask, u32 val)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+	reg &= ~mask;
+	reg |= val & mask;
+	writel_relaxed(reg, base + offset);
+
+	/* Ensure above write is completed */
+	readl_relaxed(base + offset);
+}
+
+static void qcom_eusb2_default_parameters(struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2)
+{
+	/* default parameters: tx pre-emphasis */
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
+					 PHY_CFG_TX_PREEMP_TUNE_MASK,
+					 FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0));
+
+	/* tx rise/fall time */
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
+					 PHY_CFG_TX_RISE_TUNE_MASK,
+					 FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2));
+
+	/* source impedance adjustment */
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_9,
+					 PHY_CFG_TX_RES_TUNE_MASK,
+					 FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1));
+
+	/* dc voltage level adjustement */
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_8,
+					 PHY_CFG_TX_HS_VREF_TUNE_MASK,
+					 FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3));
+
+	/* transmitter HS crossover adjustement */
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_8,
+					 PHY_CFG_TX_HS_XV_TUNE_MASK,
+					 FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0));
+}
+
+static int qcom_eusb2_ref_clk_init(struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2)
+{
+	unsigned long ref_clk_freq = clk_get_rate(qcom_snps_eusb2->ref_clk);
+
+	switch (ref_clk_freq) {
+	case 19200000:
+		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+						 FSEL_MASK,
+						 FIELD_PREP(FSEL_MASK, FSEL_19_2_MHZ_VAL));
+
+		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_2,
+						 PHY_CFG_PLL_FB_DIV_7_0_MASK,
+						 DIV_7_0_19_2_MHZ_VAL);
+
+		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
+						 PHY_CFG_PLL_FB_DIV_11_8_MASK,
+						 DIV_11_8_19_2_MHZ_VAL);
+		break;
+
+	case 38400000:
+		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+						 FSEL_MASK,
+						 FIELD_PREP(FSEL_MASK, FSEL_38_4_MHZ_VAL));
+
+		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_2,
+						 PHY_CFG_PLL_FB_DIV_7_0_MASK,
+						 DIV_7_0_38_4_MHZ_VAL);
+
+		qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
+						 PHY_CFG_PLL_FB_DIV_11_8_MASK,
+						 DIV_11_8_38_4_MHZ_VAL);
+		break;
+
+	default:
+		printf("%s: unsupported ref_clk_freq:%lu\n", __func__, ref_clk_freq);
+		return -EINVAL;
+	}
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_3,
+					 PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL);
+
+	return 0;
+}
+
+static int qcom_snps_eusb2_usb_init(struct phy *phy)
+{
+	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
+	int ret;
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG0,
+					 CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL5, POR, POR);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+					 PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_APB_ACCESS_CMD,
+					 APB_LOGIC_RESET, APB_LOGIC_RESET);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_FSEL_SEL,
+					 FSEL_SEL, FSEL_SEL);
+
+	/* update ref_clk related registers */
+	ret = qcom_eusb2_ref_clk_init(qcom_snps_eusb2);
+	if (ret)
+		return ret;
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_1,
+					 PHY_CFG_PLL_CPBIAS_CNTRL_MASK,
+					 FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1));
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_4,
+					 PHY_CFG_PLL_INT_CNTRL_MASK,
+					 FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8));
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_4,
+					 PHY_CFG_PLL_GMP_CNTRL_MASK,
+					 FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1));
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_5,
+					 PHY_CFG_PLL_PROP_CNTRL_MASK,
+					 FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10));
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_6,
+					 PHY_CFG_PLL_VCO_CNTRL_MASK,
+					 FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0));
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_CFG_CTRL_5,
+					 PHY_CFG_PLL_VREF_TUNE_MASK,
+					 FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1));
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
+					 VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL);
+
+	/* set default parameters */
+	qcom_eusb2_default_parameters(qcom_snps_eusb2);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
+					 USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
+					 USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+					 SIDDQ_SEL, SIDDQ_SEL);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL_COMMON0,
+					 SIDDQ, 0);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_UTMI_CTRL5, POR, 0);
+
+	qcom_snps_eusb2_hsphy_write_mask(qcom_snps_eusb2->base, USB_PHY_HS_PHY_CTRL2,
+					 USB2_SUSPEND_N_SEL, 0);
+
+	return 0;
+}
+
+static int qcom_snps_eusb2_phy_power_on(struct phy *phy)
+{
+	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
+	int ret;
+
+	/* TODO Repeater */
+
+	clk_prepare_enable(qcom_snps_eusb2->ref_clk);
+
+	ret = reset_deassert_bulk(&qcom_snps_eusb2->resets);
+	if (ret)
+		return ret;
+
+	ret = qcom_snps_eusb2_usb_init(phy);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int qcom_snps_eusb2_phy_power_off(struct phy *phy)
+{
+	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(phy->dev);
+
+	reset_assert_bulk(&qcom_snps_eusb2->resets);
+	clk_disable_unprepare(qcom_snps_eusb2->ref_clk);
+
+	return 0;
+}
+
+static int qcom_snps_eusb2_phy_probe(struct udevice *dev)
+{
+	struct qcom_snps_eusb2_phy_priv *qcom_snps_eusb2 = dev_get_priv(dev);
+	int ret;
+
+	qcom_snps_eusb2->base = (void __iomem *)dev_read_addr(dev);
+	if (IS_ERR(qcom_snps_eusb2->base))
+		return PTR_ERR(qcom_snps_eusb2->base);
+
+	qcom_snps_eusb2->ref_clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(qcom_snps_eusb2->ref_clk)) {
+		printf("%s: failed to get ref clk %d\n", __func__, ret);
+		return PTR_ERR(qcom_snps_eusb2->ref_clk);
+	}
+
+	ret = reset_get_bulk(dev, &qcom_snps_eusb2->resets);
+	if (ret < 0) {
+		printf("failed to get resets, ret = %d\n", ret);
+		return ret;
+
+	return 0;
+}
+
+static struct phy_ops qcom_snps_eusb2_phy_ops = {
+	.power_on = qcom_snps_eusb2_phy_power_on,
+	.power_off = qcom_snps_eusb2_phy_power_off,
+};
+
+static const struct udevice_id qcom_snps_eusb2_phy_ids[] = {
+	{
+		.compatible = "qcom,sm8550-snps-eusb2-phy",
+	},
+	{}
+};
+
+U_BOOT_DRIVER(qcom_usb_qcom_snps_eusb2) = {
+	.name = "qcom-snps-eusb2-hsphy",
+	.id = UCLASS_PHY,
+	.of_match = qcom_snps_eusb2_phy_ids,
+	.ops = &qcom_snps_eusb2_phy_ops,
+	.probe = qcom_snps_eusb2_phy_probe,
+	.priv_auto = sizeof(struct qcom_snps_eusb2_phy_priv),
+};