@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/property.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/spi/spi.h>
@@ -30,17 +31,6 @@
#include <asm/unaligned.h>
-/**
- * struct plat_max3100 - MAX3100 SPI UART platform data
- * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
- *
- * You should use this structure in your machine description to specify
- * how the MAX3100 is connected.
- */
-struct plat_max3100 {
- int crystal;
-};
-
#define MAX3100_C (1<<14)
#define MAX3100_D (0<<14)
#define MAX3100_W (1<<15)
@@ -106,7 +96,6 @@ struct max3100_port {
int irq; /* irq assigned to the max3100 */
int minor; /* minor number */
- int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */
int loopback_commit; /* need to change loopback */
int loopback; /* 1 if we are in loopback mode */
@@ -428,7 +417,8 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
struct max3100_port *s = container_of(port,
struct max3100_port,
port);
- int baud = 0;
+ unsigned int baud = port->uartclk / 16;
+ unsigned int baud230400 = (baud == 230400) ? 1 : 0;
unsigned cflag;
u32 param_new, param_mask, parity = 0;
@@ -441,40 +431,40 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
param_new = s->conf & MAX3100_BAUD;
switch (baud) {
case 300:
- if (s->crystal)
+ if (baud230400)
baud = s->baud;
else
param_new = 15;
break;
case 600:
- param_new = 14 + s->crystal;
+ param_new = 14 + baud230400;
break;
case 1200:
- param_new = 13 + s->crystal;
+ param_new = 13 + baud230400;
break;
case 2400:
- param_new = 12 + s->crystal;
+ param_new = 12 + baud230400;
break;
case 4800:
- param_new = 11 + s->crystal;
+ param_new = 11 + baud230400;
break;
case 9600:
- param_new = 10 + s->crystal;
+ param_new = 10 + baud230400;
break;
case 19200:
- param_new = 9 + s->crystal;
+ param_new = 9 + baud230400;
break;
case 38400:
- param_new = 8 + s->crystal;
+ param_new = 8 + baud230400;
break;
case 57600:
- param_new = 1 + s->crystal;
+ param_new = 1 + baud230400;
break;
case 115200:
- param_new = 0 + s->crystal;
+ param_new = 0 + baud230400;
break;
case 230400:
- if (s->crystal)
+ if (baud230400)
param_new = 0;
else
baud = s->baud;
@@ -577,7 +567,7 @@ static int max3100_startup(struct uart_port *port)
dev_dbg(&s->spi->dev, "%s\n", __func__);
s->conf = MAX3100_RM;
- s->baud = s->crystal ? 230400 : 115200;
+ s->baud = port->uartclk / 16;
s->rx_enabled = 1;
if (s->suspending)
@@ -720,8 +710,8 @@ static int uart_driver_registered;
static int max3100_probe(struct spi_device *spi)
{
+ struct device *dev = &spi->dev;
int i, retval;
- struct plat_max3100 *pdata;
u16 rx;
mutex_lock(&max3100s_lock);
@@ -757,20 +747,21 @@ static int max3100_probe(struct spi_device *spi)
max3100s[i]->irq = spi->irq;
spin_lock_init(&max3100s[i]->conf_lock);
spi_set_drvdata(spi, max3100s[i]);
- pdata = dev_get_platdata(&spi->dev);
- max3100s[i]->crystal = pdata->crystal;
max3100s[i]->minor = i;
timer_setup(&max3100s[i]->timer, max3100_timeout, 0);
dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i);
max3100s[i]->port.irq = max3100s[i]->irq;
- max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200;
max3100s[i]->port.fifosize = 16;
max3100s[i]->port.ops = &max3100_ops;
max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
max3100s[i]->port.line = i;
max3100s[i]->port.type = PORT_MAX3100;
max3100s[i]->port.dev = &spi->dev;
+
+ /* Read clock frequency from a property, uart_add_one_port() will fail if it's not set */
+ device_property_read_u32(dev, "clock-frequency", &max3100s[i]->port.uartclk);
+
retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port);
if (retval < 0)
dev_warn(&spi->dev,
Get crystal frequency via device property instead of using a platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/tty/serial/max3100.c | 49 +++++++++++++++--------------------- 1 file changed, 20 insertions(+), 29 deletions(-)