@@ -34,8 +34,6 @@
* struct plat_max3100 - MAX3100 SPI UART platform data
* @loopback: force MAX3100 in loopback
* @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
- * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw
- * flow ctrl is possible but you have less CPU usage)
*
* You should use this structure in your machine description to specify
* how the MAX3100 is connected.
@@ -43,7 +41,6 @@
struct plat_max3100 {
int loopback;
int crystal;
- int poll_time;
};
#define MAX3100_C (1<<14)
@@ -122,9 +119,6 @@ struct max3100_port {
/* need to know we are suspending to avoid deadlock on workqueue */
int suspending;
- /* poll time (in ms) for ctrl lines */
- int poll_time;
- /* and its timer */
struct timer_list timer;
};
@@ -177,10 +171,8 @@ static void max3100_timeout(struct timer_list *t)
{
struct max3100_port *s = from_timer(s, t, timer);
- if (s->port.state) {
- max3100_dowork(s);
- mod_timer(&s->timer, jiffies + s->poll_time);
- }
+ max3100_dowork(s);
+ mod_timer(&s->timer, jiffies + uart_poll_timeout(&s->port));
}
static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx)
@@ -342,8 +334,7 @@ static void max3100_enable_ms(struct uart_port *port)
struct max3100_port,
port);
- if (s->poll_time > 0)
- mod_timer(&s->timer, jiffies);
+ mod_timer(&s->timer, jiffies);
dev_dbg(&s->spi->dev, "%s\n", __func__);
}
@@ -526,9 +517,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
MAX3100_STATUS_PE | MAX3100_STATUS_FE |
MAX3100_STATUS_OE;
- if (s->poll_time > 0)
- del_timer_sync(&s->timer);
-
+ del_timer_sync(&s->timer);
uart_update_timeout(port, termios->c_cflag, baud);
spin_lock(&s->conf_lock);
@@ -556,8 +545,7 @@ static void max3100_shutdown(struct uart_port *port)
s->force_end_work = 1;
- if (s->poll_time > 0)
- del_timer_sync(&s->timer);
+ del_timer_sync(&s->timer);
if (s->workqueue) {
destroy_workqueue(s->workqueue);
@@ -768,9 +756,6 @@ static int max3100_probe(struct spi_device *spi)
pdata = dev_get_platdata(&spi->dev);
max3100s[i]->crystal = pdata->crystal;
max3100s[i]->loopback = pdata->loopback;
- max3100s[i]->poll_time = msecs_to_jiffies(pdata->poll_time);
- if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0)
- max3100s[i]->poll_time = 1;
max3100s[i]->minor = i;
timer_setup(&max3100s[i]->timer, max3100_timeout, 0);
Serial core provides a standard timeout for polling modem state. Use it instead of a custom approach. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/tty/serial/max3100.c | 25 +++++-------------------- 1 file changed, 5 insertions(+), 20 deletions(-)