diff mbox series

[v4,5/6] media: imx335: Fix active area height discrepency

Message ID 20240402140924.10009-6-umang.jain@ideasonboard.com
State Superseded
Headers show
Series [v4,1/6] media: imx335: Support 2 or 4 lane operation modes | expand

Commit Message

Umang Jain April 2, 2024, 2:09 p.m. UTC 
The imx335 reports a recommended pixel area of - 2592x1944.
The driver supported mode however limits it to height=1940.

Fix the height discrepency by correctly the value of height
(with updates to vblank and mode registers).

The IMX335_REG_HTRIMMING should also be corrected to the start
offset(i.e. 48) instead of chosing a abritrary crop start of 384.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/imx335.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index 7609dbc537b1..dfc24783dc34 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -251,9 +251,9 @@  static const struct cci_reg_sequence mode_2592x1940_regs[] = {
 	{IMX335_REG_MODE_SELECT, 0x01},
 	{IMX335_REG_MASTER_MODE, 0x00},
 	{IMX335_REG_WINMODE, 0x04},
-	{IMX335_REG_HTRIMMING_START, 384},
+	{IMX335_REG_HTRIMMING_START, 48},
 	{IMX335_REG_HNUM, 2592},
-	{IMX335_REG_Y_OUT_SIZE, 1940},
+	{IMX335_REG_Y_OUT_SIZE, 1944},
 	{IMX335_REG_AREA3_ST_ADR_1, 176},
 	{IMX335_REG_AREA3_WIDTH_1, 3928},
 	{IMX335_REG_OPB_SIZE_V, 0},
@@ -404,10 +404,10 @@  static const u32 imx335_mbus_codes[] = {
 /* Supported sensor mode configurations */
 static const struct imx335_mode supported_mode = {
 	.width = 2592,
-	.height = 1940,
+	.height = 1944,
 	.hblank = 342,
-	.vblank = 2560,
-	.vblank_min = 2560,
+	.vblank = 2556,
+	.vblank_min = 2556,
 	.vblank_max = 133060,
 	.pclk = 396000000,
 	.reg_list = {