@@ -23,6 +23,7 @@
#if !defined(CONFIG_USER_ONLY)
#include "hw/loader.h"
#endif
+#include "sysemu.h"
static void cp_reg_reset(void *key, void *value, void *udata)
{
@@ -383,6 +384,14 @@ static void cortex_m3_initfn(Object *obj)
cpu->midr = ARM_CPUID_CORTEXM3;
}
+static const ARMCPRegInfo cortexa8_cp_reginfo[] = {
+ { .name = "L2LOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 0,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ { .name = "L2AUXCR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
static void cortex_a8_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
@@ -413,6 +422,7 @@ static void cortex_a8_initfn(Object *obj)
cpu->ccsidr[0] = 0xe007e01a; /* 16k L1 dcache. */
cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */
cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */
+ define_arm_cp_regs(&cpu->env, cortexa8_cp_reginfo);
}
static const ARMCPRegInfo cortexa9_cp_reginfo[] = {
@@ -489,6 +499,29 @@ static void cortex_a9_initfn(Object *obj)
}
}
+#ifndef CONFIG_USER_ONLY
+static int a15_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ /* Linux wants the number of processors from here.
+ * Might as well set the interrupt-controller bit too.
+ */
+ *value = ((smp_cpus - 1) << 24) | (1 << 23);
+ return 0;
+}
+#endif
+
+static const ARMCPRegInfo cortexa15_cp_reginfo[] = {
+#ifndef CONFIG_USER_ONLY
+ { .name = "L2CTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2,
+ .access = PL1_RW, .resetvalue = 0, .readfn = a15_l2ctlr_read,
+ .writefn = arm_cp_write_ignore, },
+#endif
+ { .name = "L2ECTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 3,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
static void cortex_a15_initfn(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
@@ -523,6 +556,7 @@ static void cortex_a15_initfn(Object *obj)
cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */
cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */
cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */
+ define_arm_cp_regs(&cpu->env, cortexa15_cp_reginfo);
}
static void ti925t_initfn(Object *obj)
@@ -187,6 +187,16 @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = {
*/
{ .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4,
.access = PL1_W, .type = ARM_CP_WFI },
+ /* L1 cache lockdown. Not architectural in v6 and earlier but in practice
+ * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and
+ * OMAPCP will override this space.
+ */
+ { .name = "DLOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_data),
+ .resetvalue = 0 },
+ { .name = "ILOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_insn),
+ .resetvalue = 0 },
REGINFO_SENTINEL
};
@@ -708,6 +718,9 @@ static const ARMCPRegInfo omap_cp_reginfo[] = {
{ .name = "OMAP_CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
.opc1 = 0, .opc2 = CP_ANY, .access = PL1_W,
.writefn = omap_cachemaint_write },
+ { .name = "C9", .cp = 15, .crn = 9,
+ .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
REGINFO_SENTINEL
};
@@ -768,6 +781,14 @@ static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = {
REGINFO_SENTINEL
};
+static const ARMCPRegInfo strongarm_cp_reginfo[] = {
+ /* Ignore ReadBuffer accesses */
+ { .name = "C9_READBUFFER", .cp = 15, .crn = 9,
+ .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
+ .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
+ REGINFO_SENTINEL
+};
+
void register_cp_regs_for_features(ARMCPU *cpu)
{
/* Register all the coprocessor registers based on feature bits */
@@ -833,6 +854,9 @@ void register_cp_regs_for_features(ARMCPU *cpu)
if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
define_arm_cp_regs(env, omap_cp_reginfo);
}
+ if (arm_feature(env, ARM_FEATURE_STRONGARM)) {
+ define_arm_cp_regs(env, strongarm_cp_reginfo);
+ }
if (arm_feature(env, ARM_FEATURE_XSCALE)) {
define_arm_cp_regs(env, xscale_cp_reginfo);
}
@@ -1949,40 +1973,6 @@ void HELPER(set_cp15)(CPUARMState *env, uint32_t insn, uint32_t val)
break;
case 4: /* Reserved. */
goto bad_reg;
- case 9:
- if (arm_feature(env, ARM_FEATURE_OMAPCP))
- break;
- if (arm_feature(env, ARM_FEATURE_STRONGARM))
- break; /* Ignore ReadBuffer access */
- switch (crm) {
- case 0: /* Cache lockdown. */
- switch (op1) {
- case 0: /* L1 cache. */
- switch (op2) {
- case 0:
- env->cp15.c9_data = val;
- break;
- case 1:
- env->cp15.c9_insn = val;
- break;
- default:
- goto bad_reg;
- }
- break;
- case 1: /* L2 cache. */
- /* Ignore writes to L2 lockdown/auxiliary registers. */
- break;
- default:
- goto bad_reg;
- }
- break;
- case 1: /* TCM memory region registers. */
- /* Not implemented. */
- goto bad_reg;
- default:
- goto bad_reg;
- }
- break;
case 12: /* Reserved. */
goto bad_reg;
}
@@ -2122,51 +2112,6 @@ uint32_t HELPER(get_cp15)(CPUARMState *env, uint32_t insn)
}
case 4: /* Reserved. */
goto bad_reg;
- case 9:
- switch (crm) {
- case 0: /* Cache lockdown */
- switch (op1) {
- case 0: /* L1 cache. */
- if (arm_feature(env, ARM_FEATURE_OMAPCP)) {
- return 0;
- }
- switch (op2) {
- case 0:
- return env->cp15.c9_data;
- case 1:
- return env->cp15.c9_insn;
- default:
- goto bad_reg;
- }
- case 1: /* L2 cache */
- /* L2 Lockdown and Auxiliary control. */
- switch (op2) {
- case 0:
- /* L2 cache lockdown (A8 only) */
- return 0;
- case 2:
- /* L2 cache auxiliary control (A8) or control (A15) */
- if (ARM_CPUID(env) == ARM_CPUID_CORTEXA15) {
- /* Linux wants the number of processors from here.
- * Might as well set the interrupt-controller bit too.
- */
- return ((smp_cpus - 1) << 24) | (1 << 23);
- }
- return 0;
- case 3:
- /* L2 cache extended control (A15) */
- return 0;
- default:
- goto bad_reg;
- }
- default:
- goto bad_reg;
- }
- break;
- default:
- goto bad_reg;
- }
- break;
case 11: /* TCM DMA control. */
case 12: /* Reserved. */
goto bad_reg;
Convert cp15 crn=9 registers (mostly cache lockdown) to the new scheme. Note that this change makes OMAPCP cores RAZ/WI the whole c9 space. This is a change from previous behaviour, but a return to the behaviour of commit c3d2689d when OMAP1 support was first added -- subsequent commits have clearly accidentally relegated the OMAPCP RAZ condition to only a subset of the crn=9 space when adding support for other cores. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target-arm/cpu.c | 34 +++++++++++++++++ target-arm/helper.c | 103 ++++++++++++--------------------------------------- 2 files changed, 58 insertions(+), 79 deletions(-)