| Message ID | 20240321062834.21510-1-quic_ugoswami@quicinc.com |
|---|---|
| State | Accepted |
| Commit | 17a188d927f772663f8929bd5f2a990004af5917 |
| Headers | show |
| Series | [v2] arm64: dts: qcom: sm8450: Update SNPS Phy parameters for QRD platform | expand |
On Thu, 21 Mar 2024 11:58:34 +0530, Udipto Goswami wrote: > Update SNPS Phy tuning parameters for sm8450 QRD platform to fix > electrical compliance failures. > > Applied, thanks! [1/1] arm64: dts: qcom: sm8450: Update SNPS Phy parameters for QRD platform commit: 17a188d927f772663f8929bd5f2a990004af5917 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index c7d05945aa51..7b62ead68e77 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -467,6 +467,14 @@ vdda-pll-supply = <&vreg_l5b_0p88>; vdda18-supply = <&vreg_l1c_1p8>; vdda33-supply = <&vreg_l2b_3p07>; + qcom,squelch-detector-bp = <(-2090)>; + qcom,hs-disconnect-bp = <1743>; + qcom,pre-emphasis-amplitude-bp = <40000>; + qcom,pre-emphasis-duration-bp = <20000>; + qcom,hs-amplitude-bp = <2000>; + qcom,hs-output-impedance-micro-ohms = <2600000>; + qcom,hs-crossover-voltage-microvolt = <(-31000)>; + qcom,hs-rise-fall-time-bp = <(-4100)>; }; &usb_1_qmpphy {
Update SNPS Phy tuning parameters for sm8450 QRD platform to fix electrical compliance failures. Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> --- changes in v2: Recipient list was corrected. arch/arm64/boot/dts/qcom/sm8450-qrd.dts | 8 ++++++++ 1 file changed, 8 insertions(+)