| Message ID | 1476865429-13143-1-git-send-email-yamada.masahiro@socionext.com |
|---|---|
| State | New |
| Headers | show |
Hi Masahiro, Am Mittwoch, den 19.10.2016, 17:23 +0900 schrieb Masahiro Yamada: > I made a mistake as for naming for this block. The MIO block is not > implemented for these 3 SoCs in the first place. The current naming > will be a trouble if an SoC with both MIO and SD-ctrl blocks appear > in the future. > > This driver has just been merged in the previous merge window. > Rename it before the release. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > --- > > Philipp, > > If you do not mind, may I include this in my PR > along with the "select ARCH_HAS_RESET_CONTROLLER" patches? Should be fine, I don't see any potential for conflicts with the reset tree. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp > .../devicetree/bindings/reset/uniphier-reset.txt | 22 +++++++++++----------- > drivers/reset/reset-uniphier.c | 16 ++++++++-------- > 2 files changed, 19 insertions(+), 19 deletions(-) > > diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt > index e6bbfcc..78cd735 100644 > --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt > +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt > @@ -19,12 +19,12 @@ Required properties: > Example: > > sysctrl@61840000 { > - compatible = "socionext,uniphier-ld20-sysctrl", > + compatible = "socionext,uniphier-ld11-sysctrl", > "simple-mfd", "syscon"; > reg = <0x61840000 0x4000>; > > reset { > - compatible = "socionext,uniphier-ld20-reset"; > + compatible = "socionext,uniphier-ld11-reset"; > #reset-cells = <1>; > }; > > @@ -32,8 +32,8 @@ Example: > }; > > > -Media I/O (MIO) reset > ---------------------- > +Media I/O (MIO) reset, SD reset > +------------------------------- > > Required properties: > - compatible: should be one of the following: > @@ -41,21 +41,21 @@ Required properties: > "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC. > "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC. > "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC. > - "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC. > - "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC. > + "socionext,uniphier-pro5-sd-reset" - for PH1-Pro5 SoC. > + "socionext,uniphier-pxs2-sd-reset" - for ProXstream2/PH1-LD6b SoC. > "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC. > - "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC. > + "socionext,uniphier-ld20-sd-reset" - for PH1-LD20 SoC. > - #reset-cells: should be 1. > > Example: > > mioctrl@59810000 { > - compatible = "socionext,uniphier-ld20-mioctrl", > + compatible = "socionext,uniphier-ld11-mioctrl", > "simple-mfd", "syscon"; > reg = <0x59810000 0x800>; > > reset { > - compatible = "socionext,uniphier-ld20-mio-reset"; > + compatible = "socionext,uniphier-ld11-mio-reset"; > #reset-cells = <1>; > }; > > @@ -80,12 +80,12 @@ Required properties: > Example: > > perictrl@59820000 { > - compatible = "socionext,uniphier-ld20-perictrl", > + compatible = "socionext,uniphier-ld11-perictrl", > "simple-mfd", "syscon"; > reg = <0x59820000 0x200>; > > reset { > - compatible = "socionext,uniphier-ld20-peri-reset"; > + compatible = "socionext,uniphier-ld11-peri-reset"; > #reset-cells = <1>; > }; > > diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c > index 8b2558e..968c3ae 100644 > --- a/drivers/reset/reset-uniphier.c > +++ b/drivers/reset/reset-uniphier.c > @@ -154,7 +154,7 @@ struct uniphier_reset_data { > UNIPHIER_RESET_END, > }; > > -const struct uniphier_reset_data uniphier_pro5_mio_reset_data[] = { > +const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = { > UNIPHIER_MIO_RESET_SD(0, 0), > UNIPHIER_MIO_RESET_SD(1, 1), > UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1), > @@ -360,7 +360,7 @@ static int uniphier_reset_probe(struct platform_device *pdev) > .compatible = "socionext,uniphier-ld20-reset", > .data = uniphier_ld20_sys_reset_data, > }, > - /* Media I/O reset */ > + /* Media I/O reset, SD reset */ > { > .compatible = "socionext,uniphier-sld3-mio-reset", > .data = uniphier_sld3_mio_reset_data, > @@ -378,20 +378,20 @@ static int uniphier_reset_probe(struct platform_device *pdev) > .data = uniphier_sld3_mio_reset_data, > }, > { > - .compatible = "socionext,uniphier-pro5-mio-reset", > - .data = uniphier_pro5_mio_reset_data, > + .compatible = "socionext,uniphier-pro5-sd-reset", > + .data = uniphier_pro5_sd_reset_data, > }, > { > - .compatible = "socionext,uniphier-pxs2-mio-reset", > - .data = uniphier_pro5_mio_reset_data, > + .compatible = "socionext,uniphier-pxs2-sd-reset", > + .data = uniphier_pro5_sd_reset_data, > }, > { > .compatible = "socionext,uniphier-ld11-mio-reset", > .data = uniphier_sld3_mio_reset_data, > }, > { > - .compatible = "socionext,uniphier-ld20-mio-reset", > - .data = uniphier_pro5_mio_reset_data, > + .compatible = "socionext,uniphier-ld20-sd-reset", > + .data = uniphier_pro5_sd_reset_data, > }, > /* Peripheral reset */ > { _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index e6bbfcc..78cd735 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -19,12 +19,12 @@ Required properties: Example: sysctrl@61840000 { - compatible = "socionext,uniphier-ld20-sysctrl", + compatible = "socionext,uniphier-ld11-sysctrl", "simple-mfd", "syscon"; reg = <0x61840000 0x4000>; reset { - compatible = "socionext,uniphier-ld20-reset"; + compatible = "socionext,uniphier-ld11-reset"; #reset-cells = <1>; }; @@ -32,8 +32,8 @@ Example: }; -Media I/O (MIO) reset ---------------------- +Media I/O (MIO) reset, SD reset +------------------------------- Required properties: - compatible: should be one of the following: @@ -41,21 +41,21 @@ Required properties: "socionext,uniphier-ld4-mio-reset" - for PH1-LD4 SoC. "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC. "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC. - "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC. - "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC. + "socionext,uniphier-pro5-sd-reset" - for PH1-Pro5 SoC. + "socionext,uniphier-pxs2-sd-reset" - for ProXstream2/PH1-LD6b SoC. "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC. - "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC. + "socionext,uniphier-ld20-sd-reset" - for PH1-LD20 SoC. - #reset-cells: should be 1. Example: mioctrl@59810000 { - compatible = "socionext,uniphier-ld20-mioctrl", + compatible = "socionext,uniphier-ld11-mioctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x800>; reset { - compatible = "socionext,uniphier-ld20-mio-reset"; + compatible = "socionext,uniphier-ld11-mio-reset"; #reset-cells = <1>; }; @@ -80,12 +80,12 @@ Required properties: Example: perictrl@59820000 { - compatible = "socionext,uniphier-ld20-perictrl", + compatible = "socionext,uniphier-ld11-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; reset { - compatible = "socionext,uniphier-ld20-peri-reset"; + compatible = "socionext,uniphier-ld11-peri-reset"; #reset-cells = <1>; }; diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c index 8b2558e..968c3ae 100644 --- a/drivers/reset/reset-uniphier.c +++ b/drivers/reset/reset-uniphier.c @@ -154,7 +154,7 @@ struct uniphier_reset_data { UNIPHIER_RESET_END, }; -const struct uniphier_reset_data uniphier_pro5_mio_reset_data[] = { +const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = { UNIPHIER_MIO_RESET_SD(0, 0), UNIPHIER_MIO_RESET_SD(1, 1), UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1), @@ -360,7 +360,7 @@ static int uniphier_reset_probe(struct platform_device *pdev) .compatible = "socionext,uniphier-ld20-reset", .data = uniphier_ld20_sys_reset_data, }, - /* Media I/O reset */ + /* Media I/O reset, SD reset */ { .compatible = "socionext,uniphier-sld3-mio-reset", .data = uniphier_sld3_mio_reset_data, @@ -378,20 +378,20 @@ static int uniphier_reset_probe(struct platform_device *pdev) .data = uniphier_sld3_mio_reset_data, }, { - .compatible = "socionext,uniphier-pro5-mio-reset", - .data = uniphier_pro5_mio_reset_data, + .compatible = "socionext,uniphier-pro5-sd-reset", + .data = uniphier_pro5_sd_reset_data, }, { - .compatible = "socionext,uniphier-pxs2-mio-reset", - .data = uniphier_pro5_mio_reset_data, + .compatible = "socionext,uniphier-pxs2-sd-reset", + .data = uniphier_pro5_sd_reset_data, }, { .compatible = "socionext,uniphier-ld11-mio-reset", .data = uniphier_sld3_mio_reset_data, }, { - .compatible = "socionext,uniphier-ld20-mio-reset", - .data = uniphier_pro5_mio_reset_data, + .compatible = "socionext,uniphier-ld20-sd-reset", + .data = uniphier_pro5_sd_reset_data, }, /* Peripheral reset */ {
I made a mistake as for naming for this block. The MIO block is not implemented for these 3 SoCs in the first place. The current naming will be a trouble if an SoC with both MIO and SD-ctrl blocks appear in the future. This driver has just been merged in the previous merge window. Rename it before the release. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- Philipp, If you do not mind, may I include this in my PR along with the "select ARCH_HAS_RESET_CONTROLLER" patches? .../devicetree/bindings/reset/uniphier-reset.txt | 22 +++++++++++----------- drivers/reset/reset-uniphier.c | 16 ++++++++-------- 2 files changed, 19 insertions(+), 19 deletions(-) -- 1.9.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel