diff mbox series

[v2,19/21] ARM: dts: qcom: apq8064: Add PCIe bridge node

Message ID 20240321-pcie-qcom-bridge-dts-v2-19-1eb790c53e43@linaro.org
State Accepted
Commit 27cb9eccf94cb163f9bf3b945f249ab7c42861db
Headers show
Series Add PCIe bridge node in DT for Qcom SoCs | expand

Commit Message

Manivannan Sadhasivam March 21, 2024, 11:16 a.m. UTC
On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 9a5ba978775a..dbe0ae2c8770 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -1334,6 +1334,16 @@  pcie: pcie@1b500000 {
 				 <&gcc PCIE_PHY_RESET>;
 			reset-names = "axi", "ahb", "por", "pci", "phy";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		hdmi: hdmi-tx@4a00000 {