diff mbox series

[v2,21/21] arm64: dts: qcom: sm8650: Use "pcie" as the node name instead of "pci"

Message ID 20240321-pcie-qcom-bridge-dts-v2-21-1eb790c53e43@linaro.org
State New
Headers show
Series Add PCIe bridge node in DT for Qcom SoCs | expand

Commit Message

Manivannan Sadhasivam March 21, 2024, 11:16 a.m. UTC 
Qcom SoCs doesn't support legacy PCI, but only PCIe. So use the correct
node name for the controller instances.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 06d2b6432ab1..b25fefd6a786 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -2208,7 +2208,7 @@  rng: rng@10c3000 {
 			reg = <0 0x010c3000 0 0x1000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -2337,7 +2337,7 @@  pcie0_phy: phy@1c06000 {
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
 			reg = <0 0x01c08000 0 0x3000>,