diff mbox series

[v9,10/11] arm64: dts: imx8m* remove clock-names property from usb controller node

Message ID 20240315072455.2481613-10-xu.yang_2@nxp.com
State Superseded
Headers show
Series [v9,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible | expand

Commit Message

Xu Yang March 15, 2024, 7:24 a.m. UTC 
The clock-names property is not needed by usb controller node on imx8mm/n.
This will remove it.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v9:
 - new patch
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 --
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 -
 2 files changed, 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 8a1b42b94dce..696e96b15585 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1253,7 +1253,6 @@  usbotg1: usb@32e40000 {
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
@@ -1274,7 +1273,6 @@  usbotg2: usb@32e50000 {
 				reg = <0x32e50000 0x200>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 136e75c51251..f67816758b21 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1213,7 +1213,6 @@  usbotg1: usb@32e40000 {
 				reg = <0x32e40000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
 				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;