diff mbox series

[v5,1/2] Bluetooth: btintel: Define macros for image types

Message ID 20240311084626.402325-1-kiran.k@intel.com
State Accepted
Commit 2bfa4035b9d96ac9631329f2c5599aa814e9b6ae
Headers show
Series [v5,1/2] Bluetooth: btintel: Define macros for image types | expand

Commit Message

K, Kiran March 11, 2024, 8:46 a.m. UTC
Use macro for image type instead of using hard code number.

Signed-off-by: Kiran K <kiran.k@intel.com>
---
 drivers/bluetooth/btintel.c | 12 ++++++------
 drivers/bluetooth/btintel.h |  3 +++
 2 files changed, 9 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 6ba7f5d1b837..2abe75f06e9c 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -489,7 +489,7 @@  static int btintel_version_info_tlv(struct hci_dev *hdev,
 	}
 
 	switch (version->img_type) {
-	case 0x01:
+	case BTINTEL_IMG_BOOTLOADER:
 		variant = "Bootloader";
 		/* It is required that every single firmware fragment is acknowledged
 		 * with a command complete event. If the boot parameters indicate
@@ -521,7 +521,7 @@  static int btintel_version_info_tlv(struct hci_dev *hdev,
 			    version->min_fw_build_nn, version->min_fw_build_cw,
 			    2000 + version->min_fw_build_yy);
 		break;
-	case 0x03:
+	case BTINTEL_IMG_OP:
 		variant = "Firmware";
 		break;
 	default:
@@ -535,7 +535,7 @@  static int btintel_version_info_tlv(struct hci_dev *hdev,
 	bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
 		    2000 + (version->timestamp >> 8), version->timestamp & 0xff,
 		    version->build_type, version->build_num);
-	if (version->img_type == 0x03)
+	if (version->img_type == BTINTEL_IMG_OP)
 		bt_dev_info(hdev, "Firmware SHA1: 0x%8.8x", version->git_sha1);
 
 	return 0;
@@ -1172,7 +1172,7 @@  static int btintel_download_fw_tlv(struct hci_dev *hdev,
 	 * If the firmware version has changed that means it needs to be reset
 	 * to bootloader when operational so the new firmware can be loaded.
 	 */
-	if (ver->img_type == 0x03)
+	if (ver->img_type == BTINTEL_IMG_OP)
 		return -EINVAL;
 
 	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
@@ -2230,7 +2230,7 @@  static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
 	 * It is not possible to use the Secure Boot Parameters in this
 	 * case since that command is only available in bootloader mode.
 	 */
-	if (ver->img_type == 0x03) {
+	if (ver->img_type == BTINTEL_IMG_OP) {
 		btintel_clear_flag(hdev, INTEL_BOOTLOADER);
 		btintel_check_bdaddr(hdev);
 	} else {
@@ -2600,7 +2600,7 @@  static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
 		return err;
 
 	/* check if controller is already having an operational firmware */
-	if (ver->img_type == 0x03)
+	if (ver->img_type == BTINTEL_IMG_OP)
 		goto finish;
 
 	err = btintel_boot(hdev, boot_param);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index d19fcdb9ff0b..d961a33bfbd6 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -51,6 +51,9 @@  struct intel_tlv {
 	u8 val[];
 } __packed;
 
+#define BTINTEL_IMG_BOOTLOADER		0x01	/* Bootloader image */
+#define BTINTEL_IMG_OP			0x03	/* Operational image */
+
 struct intel_version_tlv {
 	u32	cnvi_top;
 	u32	cnvr_top;