diff mbox

mm: pagealloc: fix continued prints in show_free_areas

Message ID 1476790457-7776-1-git-send-email-mark.rutland@arm.com
State New
Headers show

Commit Message

Mark Rutland Oct. 18, 2016, 11:34 a.m. UTC
Recently, printk was reworked in commit:

  4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation
  lines")

As of this commit, printk calls missing KERN_CONT will have a linebreak
inserted implicitly.

In show_free_areas, we miss KERN_CONT in a few cases, and as a result
prints are unexpectedly split over a number of lines, making them
difficult to read (in v4.9-rc1).

This patch uses pr_cont (with uits implicit KERN_CONT) to mark all
continued prints that occur withing a show_free_areas() call. Note that
show_migration_types() is only called by show_free_areas().
Depending on CONFIG_NUMA a printk after show_node() may or may not be a
continuation, but follows an explicit newline if not (and thus marking
it as a continuation should not be harmful).

Signed-off-by: Mark Rutland <mark.rutland@arm.com>

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
---
 mm/page_alloc.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

-- 
1.9.1

Comments

Vlastimil Babka Oct. 18, 2016, 1 p.m. UTC | #1
On 10/18/2016 01:34 PM, Mark Rutland wrote:
> Recently, printk was reworked in commit:

>

>   4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation

>   lines")

>

> As of this commit, printk calls missing KERN_CONT will have a linebreak

> inserted implicitly.

>

> In show_free_areas, we miss KERN_CONT in a few cases, and as a result

> prints are unexpectedly split over a number of lines, making them

> difficult to read (in v4.9-rc1).

>

> This patch uses pr_cont (with uits implicit KERN_CONT) to mark all

> continued prints that occur withing a show_free_areas() call. Note that

> show_migration_types() is only called by show_free_areas().

> Depending on CONFIG_NUMA a printk after show_node() may or may not be a

> continuation, but follows an explicit newline if not (and thus marking

> it as a continuation should not be harmful).


I think this was already fixed:

http://marc.info/?l=linux-mm&m=147623910031630&w=2

> Signed-off-by: Mark Rutland <mark.rutland@arm.com>

> Cc: Andrew Morton <akpm@linux-foundation.org>

> Cc: Vlastimil Babka <vbabka@suse.cz>

> Cc: Mel Gorman <mgorman@techsingularity.net>

> Cc: linux-mm@kvack.org

> Cc: linux-kernel@vger.kernel.org

> ---

>  mm/page_alloc.c | 14 +++++++-------

>  1 file changed, 7 insertions(+), 7 deletions(-)

>

> diff --git a/mm/page_alloc.c b/mm/page_alloc.c

> index 2b3bf67..833f271 100644

> --- a/mm/page_alloc.c

> +++ b/mm/page_alloc.c

> @@ -4224,7 +4224,7 @@ static void show_migration_types(unsigned char type)

>  	}

>

>  	*p = '\0';

> -	printk("(%s) ", tmp);

> +	pr_cont("(%s) ", tmp);

>  }

>

>  /*

> @@ -4335,7 +4335,7 @@ void show_free_areas(unsigned int filter)

>  			free_pcp += per_cpu_ptr(zone->pageset, cpu)->pcp.count;

>

>  		show_node(zone);

> -		printk("%s"

> +		pr_cont("%s"

>  			" free:%lukB"

>  			" min:%lukB"

>  			" low:%lukB"

> @@ -4382,8 +4382,8 @@ void show_free_areas(unsigned int filter)

>  			K(zone_page_state(zone, NR_FREE_CMA_PAGES)));

>  		printk("lowmem_reserve[]:");

>  		for (i = 0; i < MAX_NR_ZONES; i++)

> -			printk(" %ld", zone->lowmem_reserve[i]);

> -		printk("\n");

> +			pr_cont(" %ld", zone->lowmem_reserve[i]);

> +		pr_cont("\n");

>  	}

>

>  	for_each_populated_zone(zone) {

> @@ -4394,7 +4394,7 @@ void show_free_areas(unsigned int filter)

>  		if (skip_free_areas_node(filter, zone_to_nid(zone)))

>  			continue;

>  		show_node(zone);

> -		printk("%s: ", zone->name);

> +		pr_cont("%s: ", zone->name);

>

>  		spin_lock_irqsave(&zone->lock, flags);

>  		for (order = 0; order < MAX_ORDER; order++) {

> @@ -4412,11 +4412,11 @@ void show_free_areas(unsigned int filter)

>  		}

>  		spin_unlock_irqrestore(&zone->lock, flags);

>  		for (order = 0; order < MAX_ORDER; order++) {

> -			printk("%lu*%lukB ", nr[order], K(1UL) << order);

> +			pr_cont("%lu*%lukB ", nr[order], K(1UL) << order);

>  			if (nr[order])

>  				show_migration_types(types[order]);

>  		}

> -		printk("= %lukB\n", K(total));

> +		pr_cont("= %lukB\n", K(total));

>  	}

>

>  	hugetlb_show_meminfo();

>
Mark Rutland Oct. 18, 2016, 1:04 p.m. UTC | #2
On Tue, Oct 18, 2016 at 03:00:40PM +0200, Vlastimil Babka wrote:
> On 10/18/2016 01:34 PM, Mark Rutland wrote:

> >In show_free_areas, we miss KERN_CONT in a few cases, and as a result

> >prints are unexpectedly split over a number of lines, making them

> >difficult to read (in v4.9-rc1).

> >

> >This patch uses pr_cont (with uits implicit KERN_CONT) to mark all

> >continued prints that occur withing a show_free_areas() call. Note that

> >show_migration_types() is only called by show_free_areas().

> >Depending on CONFIG_NUMA a printk after show_node() may or may not be a

> >continuation, but follows an explicit newline if not (and thus marking

> >it as a continuation should not be harmful).

> 

> I think this was already fixed:

> 

> http://marc.info/?l=linux-mm&m=147623910031630&w=2


So it was; thanks for the pointer!

Thanks,
Mark.
Michal Hocko Oct. 18, 2016, 1:44 p.m. UTC | #3
Already taken care of by
http://lkml.kernel.org/r/c7df37c8665134654a17aaeb8b9f6ace1d6db58b.1476239034.git.joe@perches.com
maybe it just fell through the cracks...

On Tue 18-10-16 12:34:17, Mark Rutland wrote:
> Recently, printk was reworked in commit:

> 

>   4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation

>   lines")

> 

> As of this commit, printk calls missing KERN_CONT will have a linebreak

> inserted implicitly.

> 

> In show_free_areas, we miss KERN_CONT in a few cases, and as a result

> prints are unexpectedly split over a number of lines, making them

> difficult to read (in v4.9-rc1).

> 

> This patch uses pr_cont (with uits implicit KERN_CONT) to mark all

> continued prints that occur withing a show_free_areas() call. Note that

> show_migration_types() is only called by show_free_areas().

> Depending on CONFIG_NUMA a printk after show_node() may or may not be a

> continuation, but follows an explicit newline if not (and thus marking

> it as a continuation should not be harmful).

> 

> Signed-off-by: Mark Rutland <mark.rutland@arm.com>

> Cc: Andrew Morton <akpm@linux-foundation.org>

> Cc: Vlastimil Babka <vbabka@suse.cz>

> Cc: Mel Gorman <mgorman@techsingularity.net>

> Cc: linux-mm@kvack.org

> Cc: linux-kernel@vger.kernel.org

> ---

>  mm/page_alloc.c | 14 +++++++-------

>  1 file changed, 7 insertions(+), 7 deletions(-)

> 

> diff --git a/mm/page_alloc.c b/mm/page_alloc.c

> index 2b3bf67..833f271 100644

> --- a/mm/page_alloc.c

> +++ b/mm/page_alloc.c

> @@ -4224,7 +4224,7 @@ static void show_migration_types(unsigned char type)

>  	}

>  

>  	*p = '\0';

> -	printk("(%s) ", tmp);

> +	pr_cont("(%s) ", tmp);

>  }

>  

>  /*

> @@ -4335,7 +4335,7 @@ void show_free_areas(unsigned int filter)

>  			free_pcp += per_cpu_ptr(zone->pageset, cpu)->pcp.count;

>  

>  		show_node(zone);

> -		printk("%s"

> +		pr_cont("%s"

>  			" free:%lukB"

>  			" min:%lukB"

>  			" low:%lukB"

> @@ -4382,8 +4382,8 @@ void show_free_areas(unsigned int filter)

>  			K(zone_page_state(zone, NR_FREE_CMA_PAGES)));

>  		printk("lowmem_reserve[]:");

>  		for (i = 0; i < MAX_NR_ZONES; i++)

> -			printk(" %ld", zone->lowmem_reserve[i]);

> -		printk("\n");

> +			pr_cont(" %ld", zone->lowmem_reserve[i]);

> +		pr_cont("\n");

>  	}

>  

>  	for_each_populated_zone(zone) {

> @@ -4394,7 +4394,7 @@ void show_free_areas(unsigned int filter)

>  		if (skip_free_areas_node(filter, zone_to_nid(zone)))

>  			continue;

>  		show_node(zone);

> -		printk("%s: ", zone->name);

> +		pr_cont("%s: ", zone->name);

>  

>  		spin_lock_irqsave(&zone->lock, flags);

>  		for (order = 0; order < MAX_ORDER; order++) {

> @@ -4412,11 +4412,11 @@ void show_free_areas(unsigned int filter)

>  		}

>  		spin_unlock_irqrestore(&zone->lock, flags);

>  		for (order = 0; order < MAX_ORDER; order++) {

> -			printk("%lu*%lukB ", nr[order], K(1UL) << order);

> +			pr_cont("%lu*%lukB ", nr[order], K(1UL) << order);

>  			if (nr[order])

>  				show_migration_types(types[order]);

>  		}

> -		printk("= %lukB\n", K(total));

> +		pr_cont("= %lukB\n", K(total));

>  	}

>  

>  	hugetlb_show_meminfo();

> -- 

> 1.9.1


-- 
Michal Hocko
SUSE Labs
diff mbox

Patch

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2b3bf67..833f271 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4224,7 +4224,7 @@  static void show_migration_types(unsigned char type)
 	}
 
 	*p = '\0';
-	printk("(%s) ", tmp);
+	pr_cont("(%s) ", tmp);
 }
 
 /*
@@ -4335,7 +4335,7 @@  void show_free_areas(unsigned int filter)
 			free_pcp += per_cpu_ptr(zone->pageset, cpu)->pcp.count;
 
 		show_node(zone);
-		printk("%s"
+		pr_cont("%s"
 			" free:%lukB"
 			" min:%lukB"
 			" low:%lukB"
@@ -4382,8 +4382,8 @@  void show_free_areas(unsigned int filter)
 			K(zone_page_state(zone, NR_FREE_CMA_PAGES)));
 		printk("lowmem_reserve[]:");
 		for (i = 0; i < MAX_NR_ZONES; i++)
-			printk(" %ld", zone->lowmem_reserve[i]);
-		printk("\n");
+			pr_cont(" %ld", zone->lowmem_reserve[i]);
+		pr_cont("\n");
 	}
 
 	for_each_populated_zone(zone) {
@@ -4394,7 +4394,7 @@  void show_free_areas(unsigned int filter)
 		if (skip_free_areas_node(filter, zone_to_nid(zone)))
 			continue;
 		show_node(zone);
-		printk("%s: ", zone->name);
+		pr_cont("%s: ", zone->name);
 
 		spin_lock_irqsave(&zone->lock, flags);
 		for (order = 0; order < MAX_ORDER; order++) {
@@ -4412,11 +4412,11 @@  void show_free_areas(unsigned int filter)
 		}
 		spin_unlock_irqrestore(&zone->lock, flags);
 		for (order = 0; order < MAX_ORDER; order++) {
-			printk("%lu*%lukB ", nr[order], K(1UL) << order);
+			pr_cont("%lu*%lukB ", nr[order], K(1UL) << order);
 			if (nr[order])
 				show_migration_types(types[order]);
 		}
-		printk("= %lukB\n", K(total));
+		pr_cont("= %lukB\n", K(total));
 	}
 
 	hugetlb_show_meminfo();