@@ -294,6 +294,7 @@ F: include/linux/fwnode.h
F: include/linux/fw_table.h
F: lib/fw_table.c
F: scripts/acpi/acpi-extract-ids
+F: tools/testing/selftests/acpi/
F: tools/power/acpi/
ACPI APEI
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+TARGETS += acpi
TARGETS += alsa
TARGETS += amd-pstate
TARGETS += arm64
new file mode 100644
@@ -0,0 +1 @@
+id_list
new file mode 100644
@@ -0,0 +1,21 @@
+PY3 = $(shell which python3 2>/dev/null)
+
+ifneq ($(PY3),)
+
+TEST_PROGS := test_unprobed_devices.sh
+TEST_GEN_FILES := id_list
+TEST_FILES := id_ignore_list
+
+include ../lib.mk
+
+$(OUTPUT)/id_list:
+ $(top_srcdir)/scripts/acpi/acpi-extract-ids -d $(top_srcdir) > $@
+
+else
+
+all: no_py3_warning
+
+no_py3_warning:
+ @echo "Missing python3. This test will be skipped."
+
+endif
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,3 @@
+PNP0A05
+PNP0A06
+ACPI0004
\ No newline at end of file
new file mode 100755
@@ -0,0 +1,138 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2023 Collabora Ltd
+#
+# Inspired by the tools/testing/selftests/dt/test_unprobed_devices.sh
+# script, adapted for the ACPI use case.
+#
+# This script checks whether devices declared in the ACPI namespace and
+# supported by the kernel are correctly bound to a driver.
+#
+# To do this, two lists are used:
+# * a list of ACPI IDs matched by existing drivers
+# * a list of IDs that should be ignored
+#
+
+DIR="$(dirname "$(readlink -f "$0")")"
+
+KTAP_HELPERS="${DIR}/../kselftest/ktap_helpers.sh"
+if ! source "$KTAP_HELPERS"; then
+ exit 4
+fi
+
+ACPI_SYSTEM_DIR="/sys/devices/LNXSYSTM:00"
+ID_IGNORE_LIST="${DIR}"/id_ignore_list
+ID_LIST="${DIR}"/id_list
+
+PCI_CLASS_BRIDGE_HOST="0x0600"
+PCI_CLASS_BRIDGE_ISA="0x0601"
+
+ktap_print_header
+
+if [[ ! -d "${ACPI_SYSTEM_DIR}" ]]; then
+ ktap_skip_all "${ACPI_SYSTEM_DIR} doesn't exist."
+ exit "${KSFT_SKIP}"
+fi
+
+# The ACPI specification mandates that ACPI objects representing devices on
+# non-enumerable and enumerable busses contain a _HID or an _ADR
+# identification object respectively. Get a list of devices of both types,
+# by searching the ACPI sysfs subtree for directories containing a hid or
+# adr attribute.
+supp_dev_paths=$(while IFS=$'\n' read -r dev_path; do
+ if [ ! -f "${dev_path}"/hid ] && [ ! -f "${dev_path}"/adr ]; then
+ continue
+ fi
+
+ # Check if the device is present, enabled, and functioning properly
+ status="${dev_path}/status"
+ if [ -f "${status}" ]; then
+ status_hex=$(($(cat "${status}")))
+
+ if [ $((status_hex & 1)) -eq 0 ] ||
+ [ $((status_hex >> 1 & 1)) -eq 0 ] ||
+ [ $((status_hex >> 3 & 1)) -eq 0 ]; then
+ continue
+ fi
+ fi
+
+ if [ -n "$(find -L "${dev_path}" -maxdepth 1 -name "physical_node*" -print -quit)" ]; then
+ for node in "${dev_path}"/physical_node*; do
+ # Ignore devices without a subsystem, devices that link to
+ # other devices, and class devices
+ if [ ! -d "${node}/subsystem" ] ||
+ [ -d "${node}/device" ] ||
+ [[ "$(readlink -f "${node}/subsystem")" == /sys/class/* ]]; then
+ continue
+ fi
+
+ echo "${node}"
+ done
+ fi
+done < <(find ${ACPI_SYSTEM_DIR} -name uevent -exec dirname {} \;))
+
+supp_dev_paths_num=$(echo "${supp_dev_paths}" | wc -w)
+ktap_set_plan "${supp_dev_paths_num}"
+
+# Iterate over ACPI devices
+for dev_path in ${supp_dev_paths}; do
+ if [ -f "${dev_path}/firmware_node/path" ]; then
+ acpi_path="$(<"${dev_path}"/firmware_node/path)"
+ fi
+
+ dev_link=$(readlink -f "${dev_path}")
+ desc="${acpi_path}-${dev_link#/sys/devices/}"
+
+ if [ -f "${dev_path}/firmware_node/hid" ]; then
+ hid="$(<"${dev_path}"/firmware_node/hid)"
+
+ if [ -f "${dev_path}/firmware_node/modalias" ]; then
+ modalias=$(<"${dev_path}/firmware_node/modalias")
+ cid=$(echo "${modalias}" | cut -d':' -f3)
+
+ # Skip devices with ignored HID/CID
+ if ignored_id=$(grep -i "${hid}" "${ID_IGNORE_LIST}" ||
+ { [ -n "${cid}" ] && grep -i "${cid}" "${ID_IGNORE_LIST}"; }); then
+ ktap_print_msg "ID ${ignored_id} ignored [SKIP]"
+ ktap_test_skip "${desc}"
+ continue
+ fi
+ # Skip devices with unsupported HID/CID
+ if [[ "${hid}" != LNX* ]] && ! grep -x -q -i "${hid}" "${ID_LIST}"; then
+ if [ -z "${cid}" ] || ! grep -x -q -i "${cid}" "${ID_LIST}"; then
+ ktap_print_msg "no match for ${hid}${cid:+:${cid}} found \
+ in the supported IDs list [SKIP]"
+ ktap_test_skip "${desc}"
+ continue
+ fi
+ fi
+ fi
+ fi
+
+ # Skip bridges that don't require a driver
+ if [ -f "${dev_path}/class" ]; then
+ class=$(<"${dev_path}"/class)
+ if [[ ${class} == ${PCI_CLASS_BRIDGE_HOST}* ]] ||
+ [[ ${class} == ${PCI_CLASS_BRIDGE_ISA}* ]]; then
+ ktap_print_msg "device linked to ${desc} does not require a driver [SKIP]"
+ ktap_test_skip "${desc}"
+ continue
+ fi
+ fi
+
+ # Search for the driver in both the device folder and the companion's folder
+ if [ -d "${dev_path}/driver" ] || [ -d "${dev_path}/firmware_node/driver" ]; then
+ ktap_test_pass "${desc}"
+ # Skip char devices
+ elif [ -f "${dev_path}/dev" ]; then
+ ktap_print_msg "${desc} is a char device [SKIP]"
+ ktap_test_skip "${desc}"
+ continue
+ else
+ ktap_test_fail "${desc}"
+ fi
+
+done
+
+ktap_finished
Add new kselftest that tests whether devices declared in the ACPI namespace and supported by the kernel are correctly bound to a driver. The test traverses the ACPI sysfs tree to get a list of all the devices defined in the ACPI namespace and verifies whether the physical devices linked to each ACPI object are bound to a driver. The test relies on two lists to skip devices not expected to be bound to a driver: - List generated by the acpi-extract-ids script: includes the ACPI IDs matched by a driver - Manual list of ignored IDs: includes the ID of devices that may be discovered only via the platform firmware and that don't require a driver or cannot be represented as platform devices The test also examines the sysfs attributes of the target device objects linked by physical_node* to exclude other devices that should not be bound to a driver. This includes: - Devices not assigned to any subsystem - Devices that are linked to other devices - Class devices - Specific PCI bridges that do not require a driver Signed-off-by: Laura Nao <laura.nao@collabora.com> --- MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/acpi/.gitignore | 1 + tools/testing/selftests/acpi/Makefile | 21 +++ tools/testing/selftests/acpi/id_ignore_list | 3 + .../selftests/acpi/test_unprobed_devices.sh | 138 ++++++++++++++++++ 6 files changed, 165 insertions(+) create mode 100644 tools/testing/selftests/acpi/.gitignore create mode 100644 tools/testing/selftests/acpi/Makefile create mode 100644 tools/testing/selftests/acpi/id_ignore_list create mode 100755 tools/testing/selftests/acpi/test_unprobed_devices.sh