| Message ID | 20240304020712.238637-1-sherry.sun@nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled | expand |
Hi Sherry, thank you for the fix! On Mon, 2024-03-04 at 10:07 +0800, Sherry Sun wrote: > If the remote uart device is not connected or not enabled after booting > up, the CTS line is high by default. At this time, if we enable the flow > control when opening the device(for example, using “stty -F /dev/ttyLP4 > crtscts” command), there will be a pending idle preamble(first writing 0 > and then writing 1 to UARTCTRL_TE will queue an idle preamble) that > cannot be sent out, resulting in the uart port fail to close(waiting for > TX empty), so the user space stty will have to wait for a long time or > forever. > > This is an LPUART IP bug(idle preamble has higher priority than CTS), > here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE, > so that the idle preamble does not get stuck due to CTS is deasserted. > > Signed-off-by: Sherry Sun <sherry.sun@nxp.com> > --- > drivers/tty/serial/fsl_lpuart.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c > index 5ddf110aedbe..dce1b5851de0 100644 > --- a/drivers/tty/serial/fsl_lpuart.c > +++ b/drivers/tty/serial/fsl_lpuart.c > @@ -2345,8 +2345,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, > > lpuart32_write(&sport->port, bd, UARTBAUD); > lpuart32_serial_setbrg(sport, baud); > - lpuart32_write(&sport->port, modem, UARTMODIR); > + /* disable CTS before enabling UARTCTRL_TE to avoid pending idle preamble */ > + lpuart32_write(&sport->port, modem & ~UARTMODIR_TXCTSE, UARTMODIR); > lpuart32_write(&sport->port, ctrl, UARTCTRL); > + /* re-enable the CTS if needed */ > + lpuart32_write(&sport->port, modem, UARTMODIR); > + > /* restore control register */ The fix makes sense to me! I see only one issue with above comment, which commit 380c966c093e7 already have put quite sub-optimal (after the actual write), but your commit now shifts it even further making it completely dangling. Should it be before last UARTCTRL write? > > if ((ctrl & (UARTCTRL_PE | UARTCTRL_M)) == UARTCTRL_PE)
Hi Sherry,
On Mon, Mar 4, 2024 at 4:32 AM Sherry Sun <sherry.sun@nxp.com> wrote:
> Hi Alexander, good catch, I will move the "/* restore control register */" message to the appropriate place in V2. Thanks!
Please add a Fixes tag in v2.
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 5ddf110aedbe..dce1b5851de0 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2345,8 +2345,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, lpuart32_write(&sport->port, bd, UARTBAUD); lpuart32_serial_setbrg(sport, baud); - lpuart32_write(&sport->port, modem, UARTMODIR); + /* disable CTS before enabling UARTCTRL_TE to avoid pending idle preamble */ + lpuart32_write(&sport->port, modem & ~UARTMODIR_TXCTSE, UARTMODIR); lpuart32_write(&sport->port, ctrl, UARTCTRL); + /* re-enable the CTS if needed */ + lpuart32_write(&sport->port, modem, UARTMODIR); + /* restore control register */ if ((ctrl & (UARTCTRL_PE | UARTCTRL_M)) == UARTCTRL_PE)
If the remote uart device is not connected or not enabled after booting up, the CTS line is high by default. At this time, if we enable the flow control when opening the device(for example, using “stty -F /dev/ttyLP4 crtscts” command), there will be a pending idle preamble(first writing 0 and then writing 1 to UARTCTRL_TE will queue an idle preamble) that cannot be sent out, resulting in the uart port fail to close(waiting for TX empty), so the user space stty will have to wait for a long time or forever. This is an LPUART IP bug(idle preamble has higher priority than CTS), here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE, so that the idle preamble does not get stuck due to CTS is deasserted. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> --- drivers/tty/serial/fsl_lpuart.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)