diff mbox series

firmware/psci: Move psci_init_system_suspend() to late_initcall()

Message ID 20240219-suspend_ops_late_init-v1-1-6330ca9597fa@quicinc.com
State New
Headers show
Series firmware/psci: Move psci_init_system_suspend() to late_initcall() | expand

Commit Message

Maulik Shah Feb. 19, 2024, 9:32 a.m. UTC
psci_init_system_suspend() invokes suspend_set_ops() very early during
bootup even before kernel command line for mem_sleep_default is setup.
This leads to kernel command line mem_sleep_default=s2idle not working
as mem_sleep_current gets changed to deep via suspend_set_ops() and never
changes back to s2idle.

Move psci_init_system_suspend() to late_initcall() to make sure kernel
command line mem_sleep_default=s2idle sets up s2idle as default suspend
mode.

Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
---
 drivers/firmware/psci/psci.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)


---
base-commit: d37e1e4c52bc60578969f391fb81f947c3e83118
change-id: 20240219-suspend_ops_late_init-27fb0b15baee

Best regards,

Comments

Dhruva Gole Feb. 23, 2024, 9:04 a.m. UTC | #1
On Feb 20, 2024 at 11:18:39 +0530, Maulik Shah (mkshah) wrote:
> 
> 
> On 2/19/2024 10:59 PM, Lorenzo Pieralisi wrote:
> > On Mon, Feb 19, 2024 at 03:02:04PM +0530, Maulik Shah wrote:
> > > psci_init_system_suspend() invokes suspend_set_ops() very early during
> > > bootup even before kernel command line for mem_sleep_default is setup.
> > > This leads to kernel command line mem_sleep_default=s2idle not working
> > > as mem_sleep_current gets changed to deep via suspend_set_ops() and never
> > > changes back to s2idle.
> > > 
> > > Move psci_init_system_suspend() to late_initcall() to make sure kernel
> > > command line mem_sleep_default=s2idle sets up s2idle as default suspend
> > > mode.
> > 
> > Why can't we fix it the other way around, namely enforce
> > mem_sleep_current according to the mem_sleep_default command line
> > even if suspend_set_ops() was already called ?
> 
> yes, this may be fixed other way also and i did not implement other way
> since mem_sleep_default_setup() only update mem_sleep_default and to avoid
> this race, it needs to also need to update mem_sleep_current along
> with it. Below change also resolves the issue.
> 
> --- a/kernel/power/suspend.c
> +++ b/kernel/power/suspend.c
> @@ -192,6 +192,7 @@ static int __init mem_sleep_default_setup(char *str)
>                 if (mem_sleep_labels[state] &&
>                     !strcmp(str, mem_sleep_labels[state])) {
>                         mem_sleep_default = state;
> +                       mem_sleep_current = state;
>                         break;
>                 }
> 
> however it may be erasing thin line between mem_sleep_default v/s
> mem_sleep_current as both gets updated while set up of mem_sleep_default.
> 
> if this change looks Ok, i can send v2 with it.

Honestly, I don't see too much of a problem with this, it only makes
sense that we're starting off with a default sleep state which means
that it will be considered as "current" sleep state.

For the issue that you described originally, I think this is a fine
solution.

> 
> > 
> > Just asking, I am not super keen on using initcalls ordering, it
> > looks fragile to me.
> 
> i agree with above.

Same.
diff mbox series

Patch

diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
index d9629ff87861..655a2db70a67 100644
--- a/drivers/firmware/psci/psci.c
+++ b/drivers/firmware/psci/psci.c
@@ -523,18 +523,26 @@  static void __init psci_init_system_reset2(void)
 		psci_system_reset2_supported = true;
 }
 
-static void __init psci_init_system_suspend(void)
+static int __init psci_init_system_suspend(void)
 {
 	int ret;
+	u32 ver;
 
 	if (!IS_ENABLED(CONFIG_SUSPEND))
-		return;
+		return 0;
+
+	ver = psci_0_2_get_version();
+	if (PSCI_VERSION_MAJOR(ver) < 1)
+		return 0;
 
 	ret = psci_features(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND));
 
 	if (ret != PSCI_RET_NOT_SUPPORTED)
 		suspend_set_ops(&psci_suspend_ops);
+
+	return ret;
 }
+late_initcall(psci_init_system_suspend)
 
 static void __init psci_init_cpu_suspend(void)
 {
@@ -651,7 +659,6 @@  static int __init psci_probe(void)
 	if (PSCI_VERSION_MAJOR(ver) >= 1) {
 		psci_init_smccc();
 		psci_init_cpu_suspend();
-		psci_init_system_suspend();
 		psci_init_system_reset2();
 		kvm_init_hyp_services();
 	}