diff mbox series

[v17,26/51] usb: dwc3: Specify maximum number of XHCI interrupters

Message ID 20240217001017.29969-27-quic_wcheng@quicinc.com
State Superseded
Headers show
Series Introduce QC USB SND audio offloading support | expand

Commit Message

Wesley Cheng Feb. 17, 2024, 12:09 a.m. UTC 
Allow for the DWC3 host driver to pass along XHCI property that defines
how many interrupters to allocate.  This is in relation for the number of
event rings that can be potentially used by other processors within the
system.

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 drivers/usb/dwc3/core.c | 12 ++++++++++++
 drivers/usb/dwc3/core.h |  2 ++
 drivers/usb/dwc3/host.c |  3 +++
 3 files changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3b68e8e45b8b..7ac02339458e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1485,6 +1485,7 @@  static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			tx_thr_num_pkt_prd = 0;
 	u8			tx_max_burst_prd = 0;
 	u8			tx_fifo_resize_max_num;
+	u16			num_hc_interrupters;
 	const char		*usb_psy_name;
 	int			ret;
 
@@ -1507,6 +1508,9 @@  static void dwc3_get_properties(struct dwc3 *dwc)
 	 */
 	tx_fifo_resize_max_num = 6;
 
+	/* default to a single XHCI interrupter */
+	num_hc_interrupters = 1;
+
 	dwc->maximum_speed = usb_get_maximum_speed(dev);
 	dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
 	dwc->dr_mode = usb_get_dr_mode(dev);
@@ -1558,6 +1562,12 @@  static void dwc3_get_properties(struct dwc3 *dwc)
 				&tx_thr_num_pkt_prd);
 	device_property_read_u8(dev, "snps,tx-max-burst-prd",
 				&tx_max_burst_prd);
+	device_property_read_u16(dev, "num-hc-interrupters",
+				&num_hc_interrupters);
+	/* DWC3 core allowed to have a max of 8 interrupters */
+	if (num_hc_interrupters > 8)
+		num_hc_interrupters = 8;
+
 	dwc->do_fifo_resize = device_property_read_bool(dev,
 							"tx-fifo-resize");
 	if (dwc->do_fifo_resize)
@@ -1649,6 +1659,8 @@  static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->imod_interval = 0;
 
 	dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;
+
+	dwc->num_hc_interrupters = num_hc_interrupters;
 }
 
 /* check whether the core supports IMOD */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index df544ec730d2..a851ea0ea2c6 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1068,6 +1068,7 @@  struct dwc3_scratchpad_array {
  * @tx_max_burst_prd: max periodic ESS transmit burst size
  * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
  * @clear_stall_protocol: endpoint number that requires a delayed status phase
+ * @num_hc_interrupters: number of host controller interrupters
  * @hsphy_interface: "utmi" or "ulpi"
  * @connected: true when we're connected to a host, false otherwise
  * @softconnect: true when gadget connect is called, false when disconnect runs
@@ -1305,6 +1306,7 @@  struct dwc3 {
 	u8			tx_max_burst_prd;
 	u8			tx_fifo_resize_max_num;
 	u8			clear_stall_protocol;
+	u16			num_hc_interrupters;
 
 	const char		*hsphy_interface;
 
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index ae189b7a4f8b..940fdaf3bec9 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -160,6 +160,9 @@  int dwc3_host_init(struct dwc3 *dwc)
 	if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A))
 		props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped");
 
+	props[prop_idx++] = PROPERTY_ENTRY_U16("num-hc-interrupters",
+						dwc->num_hc_interrupters);
+
 	if (prop_idx) {
 		ret = device_create_managed_software_node(&xhci->dev, props, NULL);
 		if (ret) {