@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * hid-ft260.c - FTDI FT260 USB HID to I2C host bridge
+ * FTDI FT260 USB HID to I2C/UART host bridge
*
* Copyright (c) 2021, Michael Zaidman <michaelz@xsightlabs.com>
*
@@ -18,11 +18,7 @@
#include <linux/kfifo.h>
#include <linux/tty_flip.h>
#include <linux/minmax.h>
-#include <asm/unaligned.h> /* Needed for cpu_to_le16, le16_to_cpu */
-
-#define UART_COUNT_MAX 4 /* Number of UARTs this driver can handle */
-#define FIFO_SIZE 256
-#define TTY_WAKEUP_WATERMARK (FIFO_SIZE / 2)
+#include <asm/unaligned.h>
#ifdef DEBUG
static int ft260_debug = 1;
@@ -148,7 +144,7 @@ enum {
FT260_FLAG_START_STOP_REPEATED = 0x07,
};
-/* Return values for ft260_get_interface_type func */
+/* USB interface type values */
enum {
FT260_IFACE_NONE,
FT260_IFACE_I2C,
@@ -250,18 +246,19 @@ struct ft260_input_report {
} __packed;
/* UART reports */
+
struct ft260_uart_write_request_report {
u8 report; /* FT260_UART_REPORT */
u8 length; /* data payload length */
u8 data[FT260_WR_UART_DATA_MAX]; /* data payload */
} __packed;
-struct ft260_configure_uart_request {
+struct ft260_configure_uart_request_report {
u8 report; /* FT260_SYSTEM_SETTINGS */
u8 request; /* FT260_SET_UART_CONFIG */
u8 flow_ctrl; /* 0: OFF, 1: RTS_CTS, 2: DTR_DSR */
/* 3: XON_XOFF, 4: No flow ctrl */
- /* The baudrate field is unaligned: */
+ /* The baudrate field is unaligned */
__le32 baudrate; /* little endian, 9600 = 0x2580, 19200 = 0x4B00 */
u8 data_bit; /* 7 or 8 */
u8 parity; /* 0: no parity, 1: odd, 2: even, 3: high, 4: low */
@@ -296,7 +293,11 @@ enum {
FT260_CFG_BAUD_MAX = 12000000,
};
-#define FT260_UART_EN_PW_SAVE_BAUD 4800
+#define FT260_UART_EN_PW_SAVE_BAUD (4800)
+
+#define UART_COUNT_MAX (4) /* Number of supported UARTs */
+#define XMIT_FIFO_SIZE (256)
+#define TTY_WAKEUP_WATERMARK (XMIT_FIFO_SIZE / 2)
static const struct hid_device_id ft260_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_FUTURE_TECHNOLOGY,
@@ -308,23 +309,18 @@ MODULE_DEVICE_TABLE(hid, ft260_devices);
struct ft260_device {
struct i2c_adapter adap;
struct hid_device *hdev;
-
int iface_type;
struct list_head device_list;
-
- /* tty_port lifetime is equal to device lifetime */
struct tty_port port;
+ /* tty port index */
unsigned int index;
struct kfifo xmit_fifo;
- /* write_lock: lock to serialize access to xmit fifo */
- spinlock_t write_lock;
+ spinlock_t xmit_fifo_lock;
struct uart_icount icount;
-
struct timer_list wakeup_timer;
struct work_struct wakeup_work;
bool reschedule_work;
bool power_saving_en;
-
struct completion wait;
struct mutex lock;
u8 i2c_wr_buf[FT260_REPORT_MAX_LEN];
@@ -337,8 +333,7 @@ struct ft260_device {
};
static int ft260_hid_feature_report_get(struct hid_device *hdev,
- unsigned char report_id, u8 *data,
- size_t len)
+ u8 report_id, u8 *data, size_t len)
{
u8 *buf;
int ret;
@@ -467,8 +462,6 @@ static int ft260_hid_output_report_check_status(struct ft260_device *dev,
ret = ft260_hid_output_report(hdev, data, len);
if (ret < 0) {
- hid_dbg(hdev, "%s: failed to start transfer, ret %d\n",
- __func__, ret);
ft260_i2c_reset(hdev);
return ret;
}
@@ -579,6 +572,8 @@ static int ft260_smbus_write(struct ft260_device *dev, u8 addr, u8 cmd,
rep->report, addr, cmd, rep->length, len);
ret = ft260_hid_output_report_check_status(dev, (u8 *)rep, len);
+ if (ret < 0)
+ hid_err(dev->hdev, "%s: failed with %d\n", __func__, ret);
return ret;
}
@@ -682,8 +677,7 @@ static int ft260_i2c_write_read(struct ft260_device *dev, struct i2c_msg *msgs)
else
read_off = *msgs[0].buf;
- ft260_dbg("%s: off %#x rlen %d wlen %d\n", __func__,
- read_off, rd_len, wr_len);
+ ft260_dbg("off %#x rlen %d wlen %d\n", read_off, rd_len, wr_len);
}
ret = ft260_i2c_write(dev, addr, msgs[0].buf, wr_len,
@@ -1051,9 +1045,6 @@ static const struct attribute_group ft260_attr_group = {
}
};
-/***
- * START Serial dev part
- */
static DEFINE_MUTEX(ft260_uart_list_lock);
static LIST_HEAD(ft260_uart_device_list);
@@ -1065,7 +1056,7 @@ static void ft260_uart_wakeup_workaraund_enable(struct ft260_device *port,
if (port->power_saving_en) {
port->reschedule_work = enable;
ft260_dbg("%s wakeup workaround",
- enable ? "Activate" : "Deactivate");
+ enable ? "activate" : "deactivate");
}
}
@@ -1085,8 +1076,8 @@ static int ft260_uart_add_port(struct ft260_device *port)
int index = 0, ret = 0;
struct ft260_device *dev;
- spin_lock_init(&port->write_lock);
- if (kfifo_alloc(&port->xmit_fifo, FIFO_SIZE, GFP_KERNEL))
+ spin_lock_init(&port->xmit_fifo_lock);
+ if (kfifo_alloc(&port->xmit_fifo, XMIT_FIFO_SIZE, GFP_KERNEL))
return -ENOMEM;
mutex_lock(&ft260_uart_list_lock);
@@ -1116,9 +1107,9 @@ static void ft260_uart_port_remove(struct ft260_device *port)
list_del(&port->device_list);
mutex_unlock(&ft260_uart_list_lock);
- spin_lock(&port->write_lock);
+ spin_lock(&port->xmit_fifo_lock);
kfifo_free(&port->xmit_fifo);
- spin_unlock(&port->write_lock);
+ spin_unlock(&port->xmit_fifo_lock);
mutex_lock(&port->port.mutex);
tty_port_tty_hangup(&port->port, false);
@@ -1127,7 +1118,7 @@ static void ft260_uart_port_remove(struct ft260_device *port)
ft260_uart_port_put(port);
}
-static struct ft260_device *ft260_uart_port_get(unsigned int index)
+static struct ft260_device *ft260_uart_port_get(int index)
{
struct ft260_device *port;
@@ -1191,20 +1182,18 @@ static int ft260_uart_transmit_chars(struct ft260_device *port)
rep->report = FT260_UART_DATA_REPORT_ID(len);
rep->length = len;
- len = kfifo_out_locked(xmit, rep->data, len, &port->write_lock);
+ len = kfifo_out_spinlocked(xmit, rep->data, len, &port->xmit_fifo_lock);
ret = ft260_hid_output_report(hdev, (u8 *)rep, len + sizeof(*rep));
- if (ret < 0) {
- hid_err(hdev, "Failed to start transfer, ret %d\n", ret);
+ if (ret < 0)
goto tty_out;
- }
data_len -= len;
port->icount.tx += len;
} while (data_len > 0);
len = kfifo_len(xmit);
- if ((FIFO_SIZE - len) > TTY_WAKEUP_WATERMARK)
+ if ((XMIT_FIFO_SIZE - len) > TTY_WAKEUP_WATERMARK)
tty_wakeup(tty);
ret = 0;
@@ -1214,15 +1203,14 @@ static int ft260_uart_transmit_chars(struct ft260_device *port)
return ret;
}
-static int ft260_uart_receive_chars(struct ft260_device *port,
- u8 *data, u8 length)
+static int ft260_uart_receive_chars(struct ft260_device *port, u8 *data, u8 length)
{
- struct hid_device *hdev = port->hdev;
int ret;
ret = tty_insert_flip_string(&port->port, data, length);
if (ret != length)
- hid_dbg(hdev, "%d char not inserted to flip buffer\n", length - ret);
+ ft260_dbg("%d char not inserted to flip buf\n", length - ret);
+
port->icount.rx += ret;
if (ret)
@@ -1231,27 +1219,25 @@ static int ft260_uart_receive_chars(struct ft260_device *port,
return ret;
}
-static int ft260_uart_write(struct tty_struct *tty, const unsigned char *buf,
- int count)
+static int ft260_uart_write(struct tty_struct *tty, const u8 *buf, int cnt)
{
struct ft260_device *port = tty->driver_data;
- struct hid_device *hdev = port->hdev;
- int len, ret;
+ int len, ret, diff;
- len = kfifo_in_locked(&port->xmit_fifo, buf, count, &port->write_lock);
- ft260_dbg("count: %d, len: %d", count, len);
+ len = kfifo_in_spinlocked(&port->xmit_fifo, buf, cnt, &port->xmit_fifo_lock);
+ ft260_dbg("count: %d, len: %d", cnt, len);
ret = ft260_uart_transmit_chars(port);
if (ret < 0) {
- hid_dbg(hdev, "Failed to transmit chars: %d\n", ret);
+ ft260_dbg("failed to transmit %d\n", ret);
return 0;
}
ret = kfifo_len(&port->xmit_fifo);
if (ret > 0) {
- hid_dbg(hdev, "Failed to all kfifo data bytes\n");
- ft260_dbg("return: %d", len - ret);
- return len - ret;
+ diff = len - ret;
+ ft260_dbg("failed to send %d out of %d bytes\n", diff, len);
+ return diff;
}
return len;
@@ -1277,7 +1263,7 @@ static int ft260_uart_change_speed(struct ft260_device *port,
{
struct hid_device *hdev = port->hdev;
unsigned int baud;
- struct ft260_configure_uart_request req;
+ struct ft260_configure_uart_request_report req;
bool wakeup_workaraund = false;
int ret;
@@ -1292,7 +1278,7 @@ static int ft260_uart_change_speed(struct ft260_device *port,
break;
case CS5:
case CS6:
- hid_err(hdev, "Invalid data bit size, setting to default (8 bit)\n");
+ hid_err(hdev, "invalid data bit size, setting a default\n");
req.data_bit = FT260_CFG_DATA_BITS_8;
termios->c_cflag &= ~CSIZE;
termios->c_cflag |= CS8;
@@ -1317,7 +1303,7 @@ static int ft260_uart_change_speed(struct ft260_device *port,
if (baud == 0 || baud < FT260_CFG_BAUD_MIN || baud > FT260_CFG_BAUD_MAX) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
- hid_err(hdev, "Invalid baud rate %d\n", baud);
+ hid_err(hdev, "invalid baud rate %d\n", baud);
baud = 9600;
tty_encode_baud_rate(tty, baud, baud);
tty_kref_put(tty);
@@ -1335,7 +1321,7 @@ static int ft260_uart_change_speed(struct ft260_device *port,
else
req.flow_ctrl = FT260_CFG_FLOW_CTRL_OFF;
- ft260_dbg("Configured termios: flow control: %d, baudrate: %d, ",
+ ft260_dbg("configured termios: flow control: %d, baudrate: %d, ",
req.flow_ctrl, baud);
ft260_dbg("data_bit: %d, parity: %d, stop_bit: %d, breaking: %d\n",
req.data_bit, req.parity,
@@ -1346,7 +1332,7 @@ static int ft260_uart_change_speed(struct ft260_device *port,
ret = ft260_hid_feature_report_set(hdev, (u8 *)&req, sizeof(req));
if (ret < 0)
- hid_err(hdev, "ft260_hid_feature_report_set failed: %d\n", ret);
+ hid_err(hdev, "failed to change termios: %d\n", ret);
return ret;
}
@@ -1396,8 +1382,8 @@ static int ft260_uart_proc_show(struct seq_file *m, void *v)
{
int i;
- seq_printf(m, "ft260 info:1.0 driver%s%s revision:%s\n",
- "", "", "");
+ seq_printf(m, "ft260 info:1.0 driver%s%s revision:%s\n", "", "", "");
+
for (i = 0; i < UART_COUNT_MAX; i++) {
struct ft260_device *port = ft260_uart_port_get(i);
@@ -1452,7 +1438,8 @@ static const struct tty_operations ft260_uart_ops = {
.get_icount = ft260_uart_get_icount,
};
-/* The FT260 has a "power saving mode" that causes the device to switch
+/*
+ * The FT260 has a "power saving mode" that causes the device to switch
* to a 30 kHz oscillator if there's no activity for 5 seconds.
* Unfortunately, this mode can only be disabled by reprogramming
* internal fuses, which requires an additional programming voltage.
@@ -1476,16 +1463,14 @@ static void ft260_uart_start_wakeup(struct timer_list *t)
static void ft260_uart_wakeup(struct ft260_device *dev)
{
- struct ft260_get_chip_version_report version;
+ struct ft260_get_chip_version_report ver;
int ret;
if (dev->reschedule_work) {
ret = ft260_hid_feature_report_get(dev->hdev, FT260_CHIP_VERSION,
- (u8 *)&version, sizeof(version));
+ (u8 *)&ver, sizeof(ver));
if (ret < 0)
- hid_err(dev->hdev,
- "%s: failed to start transfer, ret %d\n",
- __func__, ret);
+ hid_err(dev->hdev, "%s: failed with %d\n", __func__, ret);
}
}
@@ -1497,7 +1482,7 @@ static void ft260_uart_do_wakeup(struct work_struct *work)
ft260_uart_wakeup(dev);
}
-static void ft260_uart_shutdown(struct tty_port *tport)
+static void ft260_uart_port_shutdown(struct tty_port *tport)
{
struct ft260_device *port =
container_of(tport, struct ft260_device, port);
@@ -1505,7 +1490,7 @@ static void ft260_uart_shutdown(struct tty_port *tport)
ft260_uart_wakeup_workaraund_enable(port, false);
}
-static int ft260_uart_activate(struct tty_port *tport, struct tty_struct *tty)
+static int ft260_uart_port_activate(struct tty_port *tport, struct tty_struct *tty)
{
struct ft260_device *port =
container_of(tport, struct ft260_device, port);
@@ -1516,9 +1501,9 @@ static int ft260_uart_activate(struct tty_port *tport, struct tty_struct *tty)
*/
set_bit(TTY_IO_ERROR, &tty->flags);
- spin_lock(&port->write_lock);
+ spin_lock(&port->xmit_fifo_lock);
kfifo_reset(&port->xmit_fifo);
- spin_unlock(&port->write_lock);
+ spin_unlock(&port->xmit_fifo_lock);
clear_bit(TTY_IO_ERROR, &tty->flags);
@@ -1542,8 +1527,8 @@ static void ft260_uart_port_destroy(struct tty_port *tport)
}
static const struct tty_port_operations ft260_uart_port_ops = {
- .shutdown = ft260_uart_shutdown,
- .activate = ft260_uart_activate,
+ .shutdown = ft260_uart_port_shutdown,
+ .activate = ft260_uart_port_activate,
.destruct = ft260_uart_port_destroy,
};
@@ -1595,7 +1580,7 @@ static int ft260_i2c_probe(struct hid_device *hdev, struct ft260_device *dev)
static int ft260_uart_probe(struct hid_device *hdev, struct ft260_device *dev)
{
- struct ft260_configure_uart_request req;
+ struct ft260_configure_uart_request_report req;
int ret;
struct device *devt;
@@ -1623,10 +1608,10 @@ static int ft260_uart_probe(struct hid_device *hdev, struct ft260_device *dev)
ret = PTR_ERR(devt);
goto err_register_tty;
}
- hid_info(hdev, "Registering device /dev/%s%d\n",
+ hid_info(hdev, "registering device /dev/%s%d\n",
ft260_tty_driver->name, dev->index);
- /* Send Feature Report to Configure FT260 as UART 9600-8-N-1 */
+ /* Configure UART to 9600n8 */
req.report = FT260_SYSTEM_SETTINGS;
req.request = FT260_SET_UART_CONFIG;
req.flow_ctrl = FT260_CFG_FLOW_CTRL_NONE;
@@ -1638,8 +1623,7 @@ static int ft260_uart_probe(struct hid_device *hdev, struct ft260_device *dev)
ret = ft260_hid_feature_report_set(hdev, (u8 *)&req, sizeof(req));
if (ret < 0) {
- hid_err(hdev, "ft260_hid_feature_report_set failed: %d\n",
- ret);
+ hid_err(hdev, "failed to configure uart: %d\n", ret);
goto err_hid_report;
}
@@ -1660,9 +1644,9 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (!hid_is_usb(hdev))
return -EINVAL;
-
- /* We cannot used devm_kzalloc here, because port has to survive until
- * destroy function call
+ /*
+ * We cannot use devm_kzalloc here because the port has to survive
+ * until destroy function call.
*/
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
@@ -1742,7 +1726,7 @@ static void ft260_remove(struct hid_device *hdev)
tty_port_unregister_device(&dev->port, ft260_tty_driver,
dev->index);
ft260_uart_port_remove(dev);
- /* dev still needed, so we will free it in _destroy func */
+ /* dev is still needed, so we will free it in _destroy func */
} else {
sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
i2c_del_adapter(&dev->adap);
@@ -1781,7 +1765,7 @@ static int ft260_raw_event(struct hid_device *hdev, struct hid_report *report,
return 0;
} else if (xfer->length > FT260_RD_DATA_MAX) {
- hid_err(hdev, "Received data too long (%d)\n", xfer->length);
+ hid_err(hdev, "received data too long (%d)\n", xfer->length);
return -EBADR;
} else if (xfer->report >= FT260_UART_REPORT_MIN &&
xfer->report <= FT260_UART_REPORT_MAX) {
@@ -1830,7 +1814,7 @@ static int __init ft260_driver_init(void)
goto err_reg_driver;
}
- ret = hid_register_driver(&(ft260_driver));
+ ret = hid_register_driver(&ft260_driver);
if (ret) {
pr_err("hid_register_driver failed: %d\n", ret);
goto err_reg_hid;
@@ -1848,7 +1832,7 @@ static int __init ft260_driver_init(void)
static void __exit ft260_driver_exit(void)
{
- hid_unregister_driver(&(ft260_driver));
+ hid_unregister_driver(&ft260_driver);
tty_unregister_driver(ft260_tty_driver);
tty_driver_kref_put(ft260_tty_driver);
}
- Cleanup printouts and comments. - Refactor to adjust to the module's style. - Replace the kfifo_in_locked/kfifo_out_locked with kfifo_in_spinlocked/kfifo_out_spinlocked since the former may be dropped in the future. Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com> --- drivers/hid/hid-ft260.c | 148 ++++++++++++++++++---------------------- 1 file changed, 66 insertions(+), 82 deletions(-)