diff mbox series

[v4,16/18] MIPS: mobileye: eyeq5: add reset properties to UARTs

Message ID 20240131-mbly-clk-v4-16-bcd00510d6a0@bootlin.com
State New
Headers show
Series Add support for Mobileye EyeQ5 system controller | expand

Commit Message

Théo Lebrun Jan. 31, 2024, 4:26 p.m. UTC 
UART nodes have been added to the devicetree by the initial platform
support patch series. Add reset properties now that the reset node is
declared.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5.dtsi | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 06e941b0ce10..ece71cafb6ee 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -78,6 +78,7 @@  uart0: serial@800000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 10>;
 		};
 
 		uart1: serial@900000 {
@@ -88,6 +89,7 @@  uart1: serial@900000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 11>;
 		};
 
 		uart2: serial@a00000 {
@@ -98,6 +100,7 @@  uart2: serial@a00000 {
 			interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks  = <&uart_clk>, <&occ_periph>;
 			clock-names = "uartclk", "apb_pclk";
+			resets = <&reset 0 12>;
 		};
 
 		olb: system-controller@e00000 {