@@ -196,7 +196,6 @@ spi: spi@10270000 {
pwm4: pwm@10280000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280000 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -208,7 +207,6 @@ pwm4: pwm@10280000 {
pwm5: pwm@10280010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280010 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -220,7 +218,6 @@ pwm5: pwm@10280010 {
pwm6: pwm@10280020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280020 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -232,7 +229,6 @@ pwm6: pwm@10280020 {
pwm7: pwm@10280030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280030 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -386,7 +382,6 @@ i2c0: i2c@20000000 {
pwm0: pwm@20040000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040000 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -398,7 +393,6 @@ pwm0: pwm@20040000 {
pwm1: pwm@20040010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040010 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -410,7 +404,6 @@ pwm1: pwm@20040010 {
pwm2: pwm@20040020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040020 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -422,7 +415,6 @@ pwm2: pwm@20040020 {
pwm3: pwm@20040030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040030 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
The binding doesn't define interrupts and adding such a definition was refused because it's unclear how they should ever be used and the relevant registers are outside the PWM range. So drop them fixing several dtbs_check warnings like: arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb: pwm@10280030: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- Hello, after I sent https://lore.kernel.org/linux-pwm/20240106142654.1262758-2-u.kleine-koenig@pengutronix.de the feedback in that thread and on irc was that instead of adding the interrupts to the binding the right way to get rid of the warnings is to drop the interrupt properties instead. This is implemented here. Best regards Uwe arch/arm/boot/dts/rockchip/rv1108.dtsi | 8 -------- 1 file changed, 8 deletions(-) base-commit: 596764183be8ebb13352b281a442a1f1151c9b06