@@ -5,11 +5,13 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -734,9 +736,9 @@ gcc: clock-controller@100000 {
<0>,
<0>,
<0>,
- <0>,
- <0>,
- <0>;
+ <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+ <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+ <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
power-domains = <&rpmhpd RPMHPD_CX>;
#clock-cells = <1>;
@@ -2492,6 +2494,126 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};
+ usb_1_ss0_hsphy: phy@fd3000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x00fd3000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss0_qmpphy: phy@fd5000 {
+ compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+ reg = <0 0x00fd5000 0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ power-domains = <&gcc GCC_USB_0_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss1_hsphy: phy@fd9000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x00fd9000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss1_qmpphy: phy@fda000 {
+ compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+ reg = <0 0x00fda000 0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ power-domains = <&gcc GCC_USB_1_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss2_hsphy: phy@fde000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x00fde000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_TERT_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss2_qmpphy: phy@fdf000 {
+ compatible = "qcom,x1e80100-qmp-usb3-dp-phy";
+ reg = <0 0x00fdf000 0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ power-domains = <&gcc GCC_USB_2_PHY_GDSC>;
+
+ resets = <&gcc GCC_USB3_PHY_TERT_BCR>,
+ <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>;
+ reset-names = "phy",
+ "common";
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+ };
+
cnoc_main: interconnect@1500000 {
compatible = "qcom,x1e80100-cnoc-main";
reg = <0 0x1500000 0 0x14400>;
@@ -2659,6 +2781,331 @@ lpass_lpicx_noc: interconnect@7430000 {
#interconnect-cells = <2>;
};
+ usb_2_hsphy: phy@88e0000 {
+ compatible = "qcom,x1e80100-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e0000 0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&tcsr TCSR_USB2_2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_ss2: usb@a0f8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a0f8800 0 0x400>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>,
+ <&gcc GCC_USB30_TERT_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>,
+ <&gcc GCC_USB30_TERT_SLEEP_CLK>,
+ <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_TERT_MASTER_CLK>;
+ assigned-clock-rates = <19200000>,
+ <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 57 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 58 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_TERT_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_TERT_BCR>;
+
+ interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_ss2_dwc3: usb@a000000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a000000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x14a0 0x0>;
+
+ phys = <&usb_1_ss2_hsphy>,
+ <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+
+ dma-coherent;
+
+ port {
+ usb_1_ss2_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_2: usb@a2f8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a2f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pwr_event",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq";
+
+ power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+ interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ status = "disabled";
+
+ usb_2_dwc3: usb@a200000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a200000 0 0xcd00>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x14e0 0x0>;
+ phys = <&usb_2_hsphy>;
+ phy-names = "usb2-phy";
+ maximum-speed = "high-speed";
+
+ port {
+ usb_2_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1_ss0: usb@a6f8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK>,
+ <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>,
+ <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 61 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ wakeup-source;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_ss0_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x1420 0x0>;
+
+ phys = <&usb_1_ss0_hsphy>,
+ <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+
+ dma-coherent;
+
+ port {
+ usb_1_ss0_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
+ usb_1_ss1: usb@a8f8800 {
+ compatible = "qcom,x1e80100-dwc3", "qcom,dwc3";
+ reg = <0 0x0a8f8800 0 0x400>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "noc_aggr",
+ "noc_aggr_north",
+ "noc_aggr_south",
+ "noc_sys";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>,
+ <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 60 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ wakeup-source;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_ss1_dwc3: usb@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a800000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x1460 0x0>;
+
+ phys = <&usb_1_ss1_hsphy>,
+ <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,usb3_lpm_capable;
+
+ dma-coherent;
+
+ port {
+ usb_1_ss1_role_switch: endpoint {
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,x1e80100-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;