diff mbox series

wifi: mac80211: apply duration for SW scan

Message ID 20240123054752.22833-1-michael-cy.lee@mediatek.com
State New
Headers show
Series wifi: mac80211: apply duration for SW scan | expand

Commit Message

Michael-CY Lee Jan. 23, 2024, 5:47 a.m. UTC 
This patch makes duration in scan request be applicable when using
SW scan, but only accepts durations greater than the default value for
the following reasons:
1. Most APs have a beacoon interval of 100ms.
2. Sending and receiving probe require some delay.
3. Setting channel to HW also requires some delays

Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
---
 net/mac80211/scan.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 645355e5f1bc..8adcb23262f5 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -671,7 +671,10 @@  static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
 	 * After sending probe requests, wait for probe responses
 	 * on the channel.
 	 */
-	*next_delay = IEEE80211_CHANNEL_TIME;
+	*next_delay = msecs_to_jiffies(scan_req->duration) >
+		      IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME ?
+		      msecs_to_jiffies(scan_req->duration) - IEEE80211_PROBE_DELAY :
+		      IEEE80211_CHANNEL_TIME;
 	local->next_scan_state = SCAN_DECISION;
 }
 
@@ -994,7 +997,10 @@  static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 	 */
 	if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)) ||
 	    !scan_req->n_ssids) {
-		*next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+		*next_delay = msecs_to_jiffies(scan_req->duration) >
+			      IEEE80211_PASSIVE_CHANNEL_TIME ?
+			      msecs_to_jiffies(scan_req->duration) :
+			      IEEE80211_PASSIVE_CHANNEL_TIME;
 		local->next_scan_state = SCAN_DECISION;
 		if (scan_req->n_ssids)
 			set_bit(SCAN_BEACON_WAIT, &local->scanning);