@@ -105,7 +105,7 @@ obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_RTC_LIB) += rtc/
obj-y += i2c/ media/
obj-$(CONFIG_PPS) += pps/
-obj-$(CONFIG_PTP_1588_CLOCK) += ptp/
+obj-y += ptp/
obj-$(CONFIG_W1) += w1/
obj-y += power/
obj-$(CONFIG_HWMON) += hwmon/
@@ -55,10 +55,14 @@ config BFIN_RX_DESC_NUM
---help---
Set the number of buffer packets used in driver.
+config BFIN_MAC_HAS_HWSTAMP
+ def_tristate BFIN_MAC
+ depends on BF518
+ select PTP_1588_CLOCK_SELECTED
+
config BFIN_MAC_USE_HWSTAMP
bool "Use IEEE 1588 hwstamp"
- depends on BFIN_MAC && BF518
- select PTP_1588_CLOCK
+ depends on BFIN_MAC_HAS_HWSTAMP && PTP_1588_CLOCK
default y
---help---
To support the IEEE 1588 Precision Time Protocol (PTP), select y here
@@ -177,7 +177,7 @@ config AMD_XGBE
depends on ARM64 || COMPILE_TEST
select BITREVERSE
select CRC32
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports the AMD 10GbE Ethernet device found on an
AMD SoC.
@@ -773,7 +773,8 @@ static int xgbe_probe(struct platform_device *pdev)
goto err_wq;
}
- xgbe_ptp_register(pdata);
+ if (IS_REACHABLE(CONFIG_PTP_1588_CLOCK))
+ xgbe_ptp_register(pdata);
xgbe_debugfs_init(pdata);
@@ -812,7 +813,8 @@ static int xgbe_remove(struct platform_device *pdev)
xgbe_debugfs_exit(pdata);
- xgbe_ptp_unregister(pdata);
+ if (IS_REACHABLE(CONFIG_PTP_1588_CLOCK))
+ xgbe_ptp_unregister(pdata);
flush_workqueue(pdata->an_workqueue);
destroy_workqueue(pdata->an_workqueue);
@@ -110,7 +110,7 @@ config TIGON3
depends on PCI
select PHYLIB
select HWMON
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
@@ -120,7 +120,7 @@ config TIGON3
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
@@ -53,7 +53,7 @@ config THUNDER_NIC_RGX
config LIQUIDIO
tristate "Cavium LiquidIO support"
depends on 64BIT
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
select FW_LOADER
select LIBCRC32C
---help---
@@ -25,7 +25,7 @@ config FEC
ARCH_MXC || SOC_IMX28)
default ARCH_MXC || SOC_IMX28 if ARM
select PHYLIB
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
@@ -58,7 +58,7 @@ config E1000E
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
depends on PCI && (!SPARC32 || BROKEN)
select CRC32
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
@@ -83,7 +83,7 @@ config E1000E_HWTS
config IGB
tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
depends on PCI
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
select I2C
select I2C_ALGOBIT
---help---
@@ -156,7 +156,7 @@ config IXGBE
tristate "Intel(R) 10GbE PCI Express adapters support"
depends on PCI
select MDIO
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports Intel(R) 10GbE PCI Express family of
adapters. For more information on how to identify your adapter, go
@@ -213,7 +213,7 @@ config IXGBEVF
config I40E
tristate "Intel(R) Ethernet Controller XL710 Family support"
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
depends on PCI
---help---
This driver supports Intel(R) Ethernet Controller XL710 Family of
@@ -264,7 +264,7 @@ config FM10K
tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
default n
depends on PCI_MSI
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports Intel(R) FM10000 Ethernet Switch Host
Interface. For more information on how to identify your adapter,
@@ -334,7 +334,7 @@ void e1000e_ptp_init(struct e1000_adapter *adapter)
if (IS_ERR(adapter->ptp_clock)) {
adapter->ptp_clock = NULL;
e_err("ptp_clock_register failed\n");
- } else {
+ } else if (adapter->ptp_clock) {
e_info("registered PHC clock\n");
}
}
@@ -669,7 +669,7 @@ void i40e_ptp_init(struct i40e_pf *pf)
pf->ptp_clock = NULL;
dev_err(&pf->pdev->dev, "%s: ptp_clock_register failed\n",
__func__);
- } else {
+ } else if (pf->ptp_clock) {
struct timespec64 ts;
u32 regval;
@@ -1159,7 +1159,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
if (IS_ERR(adapter->ptp_clock)) {
adapter->ptp_clock = NULL;
dev_err(&adapter->pdev->dev, "ptp_clock_register failed\n");
- } else {
+ } else if (adapter->ptp_clock) {
dev_info(&adapter->pdev->dev, "added PHC on %s\n",
adapter->netdev->name);
adapter->ptp_flags |= IGB_PTP_ENABLED;
@@ -1254,7 +1254,7 @@ static long ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
adapter->ptp_clock = NULL;
e_dev_err("ptp_clock_register failed\n");
return err;
- } else
+ } else if (adapter->ptp_clock)
e_dev_info("registered PHC device on %s\n", netdev->name);
/* set default timestamp mode to disabled here. We do this in
@@ -7,7 +7,7 @@ config MLX4_EN
depends on MAY_USE_DEVLINK
depends on PCI
select MLX4_CORE
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports Mellanox Technologies ConnectX Ethernet
devices.
@@ -298,7 +298,7 @@ void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev)
if (IS_ERR(mdev->ptp_clock)) {
mdev->ptp_clock = NULL;
mlx4_err(mdev, "ptp_clock_register failed\n");
- } else {
+ } else if (mdev->ptp_clock) {
mlx4_info(mdev, "registered PHC clock\n");
}
@@ -14,7 +14,7 @@ config MLX5_CORE
config MLX5_CORE_EN
bool "Mellanox Technologies ConnectX-4 Ethernet support"
depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
default n
---help---
Ethernet support in Mellanox Technologies ConnectX-4 NIC.
@@ -273,7 +273,7 @@ void mlx5e_timestamp_init(struct mlx5e_priv *priv)
tstamp->ptp = ptp_clock_register(&tstamp->ptp_info,
&priv->mdev->pdev->dev);
- if (IS_ERR_OR_NULL(tstamp->ptp)) {
+ if (IS_ERR(tstamp->ptp)) {
mlx5_core_warn(priv->mdev, "ptp_clock_register failed %ld\n",
PTR_ERR(tstamp->ptp));
tstamp->ptp = NULL;
@@ -37,7 +37,7 @@ config RAVB
select MII
select MDIO_BITBANG
select PHYLIB
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
help
Renesas Ethernet AVB device driver.
This driver supports the following SoCs:
@@ -21,7 +21,7 @@ config SXGBE_ETH
depends on HAS_IOMEM && HAS_DMA
select PHYLIB
select CRC32
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This is the driver for the SXGBE 10G Ethernet IP block found on
Samsung platforms.
@@ -5,7 +5,7 @@ config SFC
select CRC32
select I2C
select I2C_ALGOBIT
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports 10/40-gigabit Ethernet cards based on
the Solarflare SFC4000, SFC9000-family and SFC9100-family
@@ -1269,13 +1269,13 @@ int efx_ptp_probe(struct efx_nic *efx, struct efx_channel *channel)
if (IS_ERR(ptp->phc_clock)) {
rc = PTR_ERR(ptp->phc_clock);
goto fail3;
- }
-
- INIT_WORK(&ptp->pps_work, efx_ptp_pps_worker);
- ptp->pps_workwq = create_singlethread_workqueue("sfc_pps");
- if (!ptp->pps_workwq) {
- rc = -ENOMEM;
- goto fail4;
+ } else if (ptp->phc_clock) {
+ INIT_WORK(&ptp->pps_work, efx_ptp_pps_worker);
+ ptp->pps_workwq = create_singlethread_workqueue("sfc_pps");
+ if (!ptp->pps_workwq) {
+ rc = -ENOMEM;
+ goto fail4;
+ }
}
}
ptp->nic_ts_enabled = false;
@@ -4,7 +4,7 @@ config STMMAC_ETH
select MII
select PHYLIB
select CRC32
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
select RESET_CONTROLLER
---help---
This is the driver for the Ethernet IPs are built around a
@@ -187,7 +187,7 @@ int stmmac_ptp_register(struct stmmac_priv *priv)
if (IS_ERR(priv->ptp_clock)) {
priv->ptp_clock = NULL;
pr_err("ptp_clock_register() failed on %s\n", priv->dev->name);
- } else
+ } else if (priv->ptp_clock)
pr_debug("Added PTP HW clock successfully on %s\n",
priv->dev->name);
@@ -76,7 +76,7 @@ config TI_CPSW
config TI_CPTS
bool "TI Common Platform Time Sync (CPTS) Support"
depends on TI_CPSW
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
---help---
This driver supports the Common Platform Time Sync unit of
the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
@@ -9,7 +9,7 @@ config TILE_NET
select CRC32
select TILE_GXIO_MPIPE if TILEGX
select HIGH_RES_TIMERS if TILEGX
- select PTP_1588_CLOCK if TILEGX
+ select PTP_1588_CLOCK_SELECTED if TILEGX
---help---
This is a standard Linux network device driver for the
on-chip Tilera Gigabit Ethernet and XAUI interfaces.
@@ -4,8 +4,12 @@
menu "PTP clock support"
+config PTP_1588_CLOCK_SELECTED
+ tristate
+
config PTP_1588_CLOCK
tristate "PTP clock support"
+ default PTP_1588_CLOCK_SELECTED
depends on NET
select PPS
select NET_PTP_CLASSIFY
@@ -28,7 +32,7 @@ config PTP_1588_CLOCK
config PTP_1588_CLOCK_GIANFAR
tristate "Freescale eTSEC as PTP clock"
depends on GIANFAR
- select PTP_1588_CLOCK
+ depends on PTP_1588_CLOCK
default y
help
This driver adds support for using the eTSEC as a PTP
@@ -42,7 +46,7 @@ config PTP_1588_CLOCK_GIANFAR
config PTP_1588_CLOCK_IXP46X
tristate "Intel IXP46x as PTP clock"
depends on IXP4XX_ETH
- select PTP_1588_CLOCK
+ depends on PTP_1588_CLOCK
default y
help
This driver adds support for using the IXP46X as a PTP
@@ -60,7 +64,7 @@ config DP83640_PHY
tristate "Driver for the National Semiconductor DP83640 PHYTER"
depends on NETWORK_PHY_TIMESTAMPING
depends on PHYLIB
- select PTP_1588_CLOCK
+ depends on PTP_1588_CLOCK
---help---
Supports the DP83640 PHYTER with IEEE 1588 features.
@@ -76,7 +80,7 @@ config PTP_1588_CLOCK_PCH
tristate "Intel PCH EG20T as PTP clock"
depends on X86_32 || COMPILE_TEST
depends on HAS_IOMEM && NET
- select PTP_1588_CLOCK
+ select PTP_1588_CLOCK_SELECTED
help
This driver adds support for using the PCH EG20T as a PTP
clock. The hardware supports time stamping of PTP packets
@@ -122,24 +122,6 @@ struct ptp_clock_info {
struct ptp_clock;
-/**
- * ptp_clock_register() - register a PTP hardware clock driver
- *
- * @info: Structure describing the new clock.
- * @parent: Pointer to the parent device of the new clock.
- */
-
-extern struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
- struct device *parent);
-
-/**
- * ptp_clock_unregister() - unregister a PTP hardware clock driver
- *
- * @ptp: The clock to remove from service.
- */
-
-extern int ptp_clock_unregister(struct ptp_clock *ptp);
-
enum ptp_clock_events {
PTP_CLOCK_ALARM,
@@ -166,6 +148,31 @@ struct ptp_clock_event {
};
};
+#if IS_REACHABLE(CONFIG_PTP_1588_CLOCK)
+
+/**
+ * ptp_clock_register() - register a PTP hardware clock driver
+ *
+ * @info: Structure describing the new clock.
+ * @parent: Pointer to the parent device of the new clock.
+ *
+ * Returns a valid pointer on success or PTR_ERR on failure. If PHC
+ * support is missing at the configuration level, this function
+ * returns NULL, and drivers are expected to gracefully handle that
+ * case separately.
+ */
+
+extern struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
+ struct device *parent);
+
+/**
+ * ptp_clock_unregister() - unregister a PTP hardware clock driver
+ *
+ * @ptp: The clock to remove from service.
+ */
+
+extern int ptp_clock_unregister(struct ptp_clock *ptp);
+
/**
* ptp_clock_event() - notify the PTP layer about an event
*
@@ -197,4 +204,20 @@ extern int ptp_clock_index(struct ptp_clock *ptp);
int ptp_find_pin(struct ptp_clock *ptp,
enum ptp_pin_function func, unsigned int chan);
+#else
+static inline struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
+ struct device *parent)
+{ return NULL; }
+static inline int ptp_clock_unregister(struct ptp_clock *ptp)
+{ return 0; }
+static inline void ptp_clock_event(struct ptp_clock *ptp,
+ struct ptp_clock_event *event)
+{ (void)event; }
+static inline int ptp_clock_index(struct ptp_clock *ptp)
+{ return -1; }
+static inline int ptp_find_pin(struct ptp_clock *ptp,
+ enum ptp_pin_function func, unsigned int chan)
+{ return -1; }
+#endif
+
#endif