@@ -3,4 +3,5 @@
obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom_pmic_tcpm.o
qcom_pmic_tcpm-y += qcom_pmic_typec.o \
qcom_pmic_typec_port.o \
- qcom_pmic_typec_pdphy.o
+ qcom_pmic_typec_pdphy.o \
+ qcom_pmic_typec_pdphy_stub.o \
@@ -118,7 +118,7 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
const struct pmic_typec_resources *res;
struct regmap *regmap;
struct device *bridge_dev;
- u32 base[2];
+ u32 base;
int ret;
res = of_device_get_match_data(dev);
@@ -145,7 +145,7 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
return -ENODEV;
}
- ret = of_property_read_u32_array(np, "reg", base, 2);
+ ret = of_property_read_u32_index(np, "reg", 0, &base);
if (ret)
return ret;
@@ -154,14 +154,24 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
return PTR_ERR(tcpm->pmic_typec_port);
ret = qcom_pmic_typec_port_probe(pdev, tcpm->pmic_typec_port,
- res->port_res, regmap, base[0]);
+ res->port_res, regmap, base);
if (ret)
return ret;
- ret = res->pdphy_probe(pdev, tcpm,
- res->pdphy_res, regmap, base[1]);
- if (ret)
- return ret;
+ if (res->pdphy_res) {
+ ret = of_property_read_u32_index(np, "reg", 1, &base);
+ if (ret)
+ return ret;
+
+ ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm,
+ res->pdphy_res, regmap, base);
+ if (ret)
+ return ret;
+ } else {
+ ret = qcom_pmic_typec_pdphy_stub_probe(pdev, tcpm);
+ if (ret)
+ return ret;
+ }
mutex_init(&tcpm->lock);
platform_set_drvdata(pdev, tcpm);
@@ -253,8 +263,14 @@ static struct pmic_typec_resources pm8150b_typec_res = {
.port_res = &pm8150b_port_res,
};
+static struct pmic_typec_resources pmi632_typec_res = {
+ /* PD PHY not present */
+ .port_res = &pm8150b_port_res,
+};
+
static const struct of_device_id qcom_pmic_typec_table[] = {
{ .compatible = "qcom,pm8150b-typec", .data = &pm8150b_typec_res },
+ { .compatible = "qcom,pmi632-typec", .data = &pmi632_typec_res },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
@@ -31,5 +31,7 @@ int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev,
const struct pmic_typec_pdphy_resources *res,
struct regmap *regmap,
u32 base);
+int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev,
+ struct pmic_typec *tcpm);
#endif /* __QCOM_PMIC_TYPEC_PDPHY_H__ */
new file mode 100644
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024, Linaro Ltd. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/tcpm.h>
+#include "qcom_pmic_typec.h"
+#include "qcom_pmic_typec_pdphy.h"
+
+static int qcom_pmic_typec_pdphy_stub_pd_transmit(struct tcpc_dev *tcpc,
+ enum tcpm_transmit_type type,
+ const struct pd_message *msg,
+ unsigned int negotiated_rev)
+{
+ struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+ struct device *dev = tcpm->dev;
+
+ dev_dbg(dev, "pdphy_transmit: type=%d\n", type);
+
+ tcpm_pd_transmit_complete(tcpm->tcpm_port,
+ TCPC_TX_SUCCESS);
+
+ return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_set_pd_rx(struct tcpc_dev *tcpc, bool on)
+{
+ struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+ struct device *dev = tcpm->dev;
+
+ dev_dbg(dev, "set_pd_rx: %s\n", on ? "on" : "off");
+
+ return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_set_roles(struct tcpc_dev *tcpc, bool attached,
+ enum typec_role power_role,
+ enum typec_data_role data_role)
+{
+ struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+ struct device *dev = tcpm->dev;
+
+ dev_dbg(dev, "pdphy_set_roles: data_role_host=%d power_role_src=%d\n",
+ data_role, power_role);
+
+ return 0;
+}
+
+int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev,
+ struct pmic_typec *tcpm)
+{
+ tcpm->tcpc.set_pd_rx = qcom_pmic_typec_pdphy_stub_set_pd_rx;
+ tcpm->tcpc.set_roles = qcom_pmic_typec_pdphy_stub_set_roles;
+ tcpm->tcpc.pd_transmit = qcom_pmic_typec_pdphy_stub_pd_transmit;
+
+ return 0;
+}
The PMI632 PMIC support Type-C port handling, but lacks USB PowerDelivery support. The TCPM requires all callbacks to be provided by the implementation. Implement a special, 'stub' Qcom PD PHY implementation to enable the PMI632 support. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/usb/typec/tcpm/qcom/Makefile | 3 +- drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 30 +++++++--- .../usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h | 2 + .../typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c | 67 ++++++++++++++++++++++ 4 files changed, 94 insertions(+), 8 deletions(-)