diff mbox series

[04/13] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data

Message ID 20240113-pmi632-typec-v1-4-de7dfd459353@linaro.org
State New
Headers show
Series [01/13] dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PMI632 | expand

Commit Message

Dmitry Baryshkov Jan. 13, 2024, 5:42 a.m. UTC 
Extend the Qualcomm USB-C QMP PHY schema with the USB-C related entry
points: orientation-switch property and USB-C connection graph.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml    | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
index 868fabd44d72..da5d4cbca24c 100644
--- a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
@@ -50,6 +50,22 @@  properties:
   "#phy-cells":
     const: 0
 
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
 required:
   - compatible
   - reg
@@ -129,4 +145,27 @@  examples:
 
       vdda-phy-supply = <&vreg_l1a_0p875>;
       vdda-pll-supply = <&vreg_l2a_1p2>;
+
+      orientation-switch;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          endpoint {
+            remote-endpoint = <&pmic_typec_mux_in>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          endpoint {
+            remote-endpoint = <&usb_dwc3_ss>;
+          };
+        };
+      };
     };