@@ -6,8 +6,10 @@
/dts-v1/;
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
#include "sm4250.dtsi"
#include "pm6125.dtsi"
+#include "pmi632.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QRB4210 RB2";
@@ -256,6 +258,46 @@ kypd_vol_up_n: kypd-vol-up-n-state {
};
};
+&pmi632_typec {
+ status = "okay";
+
+ connector {
+ compatible = "usb-c-connector";
+
+ power-role = "dual";
+ data-role = "dual";
+ self-powered;
+
+ typec-power-opmode = "default";
+ pd-disable;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pmi632_hs_in: endpoint {
+ remote-endpoint = <&usb_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pmi632_ss_in: endpoint {
+ remote-endpoint = <&usb_qmpphy_out>;
+ };
+ };
+ };
+ };
+};
+
+&pmi632_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+ status = "okay";
+};
+
&pon_pwrkey {
status = "okay";
};
@@ -607,6 +649,10 @@ &usb {
status = "okay";
};
+&usb_dwc3_hs {
+ remote-endpoint = <&pmi632_hs_in>;
+};
+
&usb_hsphy {
vdd-supply = <&vreg_l4a_0p9>;
vdda-pll-supply = <&vreg_l12a_1p8>;
@@ -622,6 +668,10 @@ &usb_qmpphy {
status = "okay";
};
+&usb_qmpphy_out {
+ remote-endpoint = <&pmi632_ss_in>;
+};
+
&wifi {
vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
@@ -878,8 +878,29 @@ usb_qmpphy: phy@1615000 {
clock-output-names = "usb3_phy_pipe_clk_src";
#phy-cells = <0>;
+ orientation-switch;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_dwc3_ss>;
+ };
+ };
+ };
};
system_noc: interconnect@1880000 {
@@ -1614,6 +1635,28 @@ usb_dwc3: usb@4e00000 {
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
+
+ usb-role-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+ };
+ };
+ };
};
};
Plug in USB-C related bits and pieces to enable USB role switching and USB-C orientation handling for the Qualcomm RB2 board. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 50 ++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sm6115.dtsi | 43 +++++++++++++++++++++++++++ 2 files changed, 93 insertions(+)