| Message ID | 20240112135004.28907-1-lee@kyuhyuk.kr |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
Hi Lee, On 1/13/24 00:50, KyuHyuk Lee wrote: > This patch is to add a device tree for new board Hardkernel ODROID-M1S > based on Rockchip RK3566, includes basic peripherals uart/eMMC/uSD/i2c > > Signed-off-by: KyuHyuk Lee <lee@kyuhyuk.kr> > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3566-odroid-m1s.dts | 388 ++++++++++++++++++ > 2 files changed, 389 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index a7b30e11beaf..0cc7360a6120 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-odroid-m1s.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts > new file mode 100644 > index 000000000000..c6c4f573535f > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts > @@ -0,0 +1,388 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2024 KyuHyuk Lee <lee@kyuhyuk.kr> > + * > + */ > + > +/dts-v1/; > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/rockchip.h> > +#include "rk3566.dtsi" > + > +/ { > + model = "Hardkernel ODROID-M1S"; > + compatible = "rockchip,rk3566-odroid-m1s", "rockchip,rk3566"; > + > + aliases { > + i2c0 = &i2c3; > + i2c3 = &i2c0; > + spi0 = &spi1; > + spi1 = &spi0; > + mmc0 = &sdmmc0; > + mmc1 = &sdhci; > + serial0 = &uart6; > + serial1 = &uart0; > + serial6 = &uart1; > + }; I suppose these mismatched aliases are here to keep compatibility with the Odroid M1? However thats going to be super confusing to anyone following the actual Odroid M1S connector pinout (even the pin card that came with my Odroid M1S doesnt show these mappings, but the actual real ports)? > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led_power: led-0 { > + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; > + function = LED_FUNCTION_POWER; > + color = <LED_COLOR_ID_RED>; > + linux,default-trigger = "default-on"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led_power_pin>; > + }; > + led_work: led-1 { > + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > + function = LED_FUNCTION_HEARTBEAT; > + color = <LED_COLOR_ID_BLUE>; > + linux,default-trigger = "heartbeat"; > + pinctrl-names = "default"; > + pinctrl-0 = <&led_work_pin>; > + }; > + }; > + > + vcc_sys: vcc-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc3v3_sys: vcc3v3-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_sys: vcc5v0-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&vcc_sys>; > + }; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&i2c0 { > + status = "okay"; > + > + vdd_cpu: regulator@1c { > + compatible = "tcs,tcs452x"; This compatible seems to be from the Rockchip kernel, for mainline it should be "tcs,tcs4525"? > + reg = <0x1c>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <712500>; > + regulator-max-microvolt = <1390000>; > + regulator-init-microvolt = <900000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc5v0_sys>; I had checked schematics for this and they seem to show that this is vin-supply = <&vcc3v3_sys>? > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + rk809: pmic@20 { > + compatible = "rockchip,rk809"; > + reg = <0x20>; > + interrupt-parent = <&gpio0>; > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + vcc1-supply = <&vcc3v3_sys>; > + vcc2-supply = <&vcc3v3_sys>; > + vcc3-supply = <&vcc3v3_sys>; > + vcc4-supply = <&vcc3v3_sys>; > + vcc5-supply = <&vcc3v3_sys>; > + vcc6-supply = <&vcc3v3_sys>; > + vcc7-supply = <&vcc3v3_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc3v3_sys>; > + wakeup-source; > + > + regulators { > + vdd_logic: DCDC_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-init-microvolt = <900000>; > + regulator-ramp-delay = <6001>; > + regulator-initial-mode = <0x2>; > + regulator-name = "vdd_logic"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: DCDC_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-init-microvolt = <900000>; > + regulator-ramp-delay = <6001>; > + regulator-initial-mode = <0x2>; > + regulator-name = "vdd_gpu"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + regulator-name = "vcc_ddr"; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vdd_npu: DCDC_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-init-microvolt = <900000>; > + regulator-ramp-delay = <6001>; > + regulator-initial-mode = <0x2>; > + regulator-name = "vdd_npu"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_image: LDO_REG1 { > + regulator-boot-on; > + regulator-always-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdda0v9_image"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda_0v9: LDO_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdda_0v9"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_pmu: LDO_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdda0v9_pmu"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <900000>; > + }; > + }; > + > + vccio_acodec: LDO_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-name = "vccio_acodec"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_sd"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_pmu: LDO_REG6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3_pmu"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcca_1v8: LDO_REG7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca_1v8"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca1v8_ddr: LDO_REG8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_pmu"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcca1v8_image: LDO_REG9 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_image"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG5 { Maybe its just me, but seems odd that DCDC_REG5 is out of order with the other DCDC regulators above. > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3: SWITCH_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_3v3"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_sd: SWITCH_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc3v3_sd"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + }; > +}; > + > +&pinctrl { > + leds { > + led_power_pin: led-power-pin { > + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + led_work_pin: led-work-pin { > + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + pmic { > + pmic_int_l: pmic-int-l { > + rockchip,pins = > + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmuio2-supply = <&vcc3v3_pmu>; > + vccio1-supply = <&vccio_acodec>; > + vccio3-supply = <&vccio_sd>; > + vccio4-supply = <&vcc_3v3>; > + vccio5-supply = <&vcc_3v3>; > + vccio6-supply = <&vcc_3v3>; > + vccio7-supply = <&vcc_3v3>; > + status = "okay"; > +}; Did you miss pmuio1 and vccio2 here? the latter of which is the eMMC domain. Are you planning to add additional patches for usb, gmac etc? I had been working through cleaning up these device tree files with a view to submitting them soon also. Regards Tim
Hi Lee, On 1/15/24 02:10, KyuHyuk Lee wrote: >>> + >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + rk809: pmic@20 { >>> + compatible = "rockchip,rk809"; >>> + reg = <0x20>; >>> + interrupt-parent = <&gpio0>; >>> + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; >>> + #clock-cells = <1>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&pmic_int_l>; >>> + rockchip,system-power-controller; >>> + vcc1-supply = <&vcc3v3_sys>; >>> + vcc2-supply = <&vcc3v3_sys>; >>> + vcc3-supply = <&vcc3v3_sys>; >>> + vcc4-supply = <&vcc3v3_sys>; >>> + vcc5-supply = <&vcc3v3_sys>; >>> + vcc6-supply = <&vcc3v3_sys>; >>> + vcc7-supply = <&vcc3v3_sys>; >>> + vcc8-supply = <&vcc3v3_sys>; >>> + vcc9-supply = <&vcc3v3_sys>; >>> + wakeup-source; >>> + >>> + regulators { >>> + vdd_logic: DCDC_REG1 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <500000>; >>> + regulator-max-microvolt = <1350000>; >>> + regulator-init-microvolt = <900000>; Also "regulator-init-microvolt" is also copied from downstream and not currently supported, see: https://lore.kernel.org/all/20230707162217.675390-1-cristian.ciocaltea@collabora.com/ >>> + regulator-ramp-delay = <6001>; >>> + regulator-initial-mode = <0x2>; >>> + regulator-name = "vdd_logic"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vdd_gpu: DCDC_REG2 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <500000>; >>> + regulator-max-microvolt = <1350000>; >>> + regulator-init-microvolt = <900000>; >>> + regulator-ramp-delay = <6001>; >>> + regulator-initial-mode = <0x2>; >>> + regulator-name = "vdd_gpu"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vcc_ddr: DCDC_REG3 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-initial-mode = <0x2>; >>> + regulator-name = "vcc_ddr"; >>> + regulator-state-mem { >>> + regulator-on-in-suspend; >>> + }; >>> + }; >>> + >>> + vdd_npu: DCDC_REG4 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <500000>; >>> + regulator-max-microvolt = <1350000>; >>> + regulator-init-microvolt = <900000>; >>> + regulator-ramp-delay = <6001>; >>> + regulator-initial-mode = <0x2>; >>> + regulator-name = "vdd_npu"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vdda0v9_image: LDO_REG1 { >>> + regulator-boot-on; >>> + regulator-always-on; >>> + regulator-min-microvolt = <900000>; >>> + regulator-max-microvolt = <900000>; >>> + regulator-name = "vdda0v9_image"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vdda_0v9: LDO_REG2 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <900000>; >>> + regulator-max-microvolt = <900000>; >>> + regulator-name = "vdda_0v9"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vdda0v9_pmu: LDO_REG3 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <900000>; >>> + regulator-max-microvolt = <900000>; >>> + regulator-name = "vdda0v9_pmu"; >>> + regulator-state-mem { >>> + regulator-on-in-suspend; >>> + regulator-suspend-microvolt = <900000>; >>> + }; >>> + }; >>> + >>> + vccio_acodec: LDO_REG4 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <3000000>; >>> + regulator-max-microvolt = <3000000>; >>> + regulator-name = "vccio_acodec"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vccio_sd: LDO_REG5 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <3300000>; >>> + regulator-name = "vccio_sd"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vcc3v3_pmu: LDO_REG6 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <3300000>; >>> + regulator-max-microvolt = <3300000>; >>> + regulator-name = "vcc3v3_pmu"; >>> + regulator-state-mem { >>> + regulator-on-in-suspend; >>> + regulator-suspend-microvolt = <3300000>; >>> + }; >>> + }; >>> + >>> + vcca_1v8: LDO_REG7 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + regulator-name = "vcca_1v8"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vcca1v8_ddr: LDO_REG8 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + regulator-name = "vcca1v8_pmu"; >>> + regulator-state-mem { >>> + regulator-on-in-suspend; >>> + regulator-suspend-microvolt = <1800000>; >>> + }; >>> + }; >>> + >>> + vcca1v8_image: LDO_REG9 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + regulator-name = "vcca1v8_image"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vcc_1v8: DCDC_REG5 { >> Maybe its just me, but seems odd that DCDC_REG5 is out of order with the >> other DCDC regulators above. >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-min-microvolt = <1800000>; >>> + regulator-max-microvolt = <1800000>; >>> + regulator-name = "vcc_1v8"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vcc_3v3: SWITCH_REG1 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-name = "vcc_3v3"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + >>> + vcc3v3_sd: SWITCH_REG2 { >>> + regulator-always-on; >>> + regulator-boot-on; >>> + regulator-name = "vcc3v3_sd"; >>> + regulator-state-mem { >>> + regulator-off-in-suspend; >>> + }; >>> + }; >>> + }; >>> + }; >>> +}; >>> + >>> +&pinctrl { >>> + leds { >>> + led_power_pin: led-power-pin { >>> + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; >>> + }; >>> + led_work_pin: led-work-pin { >>> + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; >>> + }; >>> + }; >>> + >>> + pmic { >>> + pmic_int_l: pmic-int-l { >>> + rockchip,pins = >>> + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; >>> + }; >>> + }; >>> +}; >>> + >>> +&pmu_io_domains { >>> + pmuio2-supply = <&vcc3v3_pmu>; >>> + vccio1-supply = <&vccio_acodec>; >>> + vccio3-supply = <&vccio_sd>; >>> + vccio4-supply = <&vcc_3v3>; >>> + vccio5-supply = <&vcc_3v3>; >>> + vccio6-supply = <&vcc_3v3>; >>> + vccio7-supply = <&vcc_3v3>; >>> + status = "okay"; >>> +}; >> Did you miss pmuio1 and vccio2 here? the latter of which is the eMMC domain. >> >> Are you planning to add additional patches for usb, gmac etc? I had been >> working through cleaning up these device tree files with a view to >> submitting them soon also. >> >> Regards >> Tim > Hello Tim. Thank you for your reviewing. > > I'll check you said above. > > Yes, I am planning additional patches like usb, gmac as you said. > May I understand that you cleaned up my patch? No, I've been working from the Hardkernel and Tobetters device trees. Regards Tim > I look forward to your reply. > > Thank you, > KyuHyuk Lee. > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index a7b30e11beaf..0cc7360a6120 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-odroid-m1s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts new file mode 100644 index 000000000000..c6c4f573535f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 KyuHyuk Lee <lee@kyuhyuk.kr> + * + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566.dtsi" + +/ { + model = "Hardkernel ODROID-M1S"; + compatible = "rockchip,rk3566-odroid-m1s", "rockchip,rk3566"; + + aliases { + i2c0 = &i2c3; + i2c3 = &i2c0; + spi0 = &spi1; + spi1 = &spi0; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + serial0 = &uart6; + serial1 = &uart0; + serial6 = &uart1; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&led_power_pin>; + }; + led_work: led-1 { + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_work_pin>; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs452x"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_ddr: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&pinctrl { + leds { + led_power_pin: led-power-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_work_pin: led-work-pin { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pmu_io_domains { + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; \ No newline at end of file
This patch is to add a device tree for new board Hardkernel ODROID-M1S based on Rockchip RK3566, includes basic peripherals uart/eMMC/uSD/i2c Signed-off-by: KyuHyuk Lee <lee@kyuhyuk.kr> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3566-odroid-m1s.dts | 388 ++++++++++++++++++ 2 files changed, 389 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-odroid-m1s.dts