diff mbox series

[v4,3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28

Message ID 20240112142621.13525-4-prabhakar.mahadev-lad.rj@bp.renesas.com
State Superseded
Headers show
Series [v4,1/4] pinctrl: renesas: rzg2l: Improve code for readability | expand

Commit Message

Lad, Prabhakar Jan. 12, 2024, 2:26 p.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add the missing port pins P19 to P28 for RZ/Five SoC. These additional
pins provide expanded capabilities and are exclusive to the RZ/Five SoC.

Couple of port pins have different configuration and are not identical for
the complete port so introduce struct rzg2l_variable_pin_cfg to handle
such cases and introduce the PIN_CFG_VARIABLE macro. The actual pin config
is then assigned in rzg2l_pinctrl_get_variable_pin_cfg().

Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins
which support interrupt facility.

While at define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 213 +++++++++++++++++++++++-
 1 file changed, 204 insertions(+), 9 deletions(-)

Comments

Lad, Prabhakar Jan. 12, 2024, 5:05 p.m. UTC | #1
Hi Biju,

Thank you for the review.

On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
>
>
> Hi Prabhakar,
>
> > -----Original Message-----
> > From: Prabhakar <prabhakar.csengg@gmail.com>
> > Sent: Friday, January 12, 2024 2:26 PM
> > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing
> > port pins P19 to P28
> >
<snip>
> >
> > +/**
> > + * struct rzg2l_variable_pin_cfg - pin data cfg
> > + * @cfg: port pin configuration
> > + * @port: port number
> > + * @pin: port pin
> > + */
> > +struct rzg2l_variable_pin_cfg {
> > +     u32 cfg:20;
> > +     u8 port:5;
>
>  u32 ??
This is done based on the feedback provided previously by Geert [0].

> > +     u8 pin:5;
>
>  u32 ??
>
ditto.

[0] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20231201131551.201503-3-prabhakar.mahadev-lad.rj@bp.renesas.com/#25625118

Cheers,
Prabhakar
Lad, Prabhakar Jan. 12, 2024, 5:14 p.m. UTC | #2
On Fri, Jan 12, 2024 at 5:10 PM Biju Das <biju.das.jz@bp.renesas.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> > Sent: Friday, January 12, 2024 5:06 PM
> > Subject: Re: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the
> > missing port pins P19 to P28
> >
> > Hi Biju,
> >
> > Thank you for the review.
> >
> > On Fri, Jan 12, 2024 at 2:31 PM Biju Das <biju.das.jz@bp.renesas.com>
> > wrote:
> > >
> > >
> > > Hi Prabhakar,
> > >
> > > > -----Original Message-----
> > > > From: Prabhakar <prabhakar.csengg@gmail.com>
> > > > Sent: Friday, January 12, 2024 2:26 PM
> > > > Subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the
> > > > missing port pins P19 to P28
> > > >
> > <snip>
> > > >
> > > > +/**
> > > > + * struct rzg2l_variable_pin_cfg - pin data cfg
> > > > + * @cfg: port pin configuration
> > > > + * @port: port number
> > > > + * @pin: port pin
> > > > + */
> > > > +struct rzg2l_variable_pin_cfg {
> > > > +     u32 cfg:20;
> > > > +     u8 port:5;
> > >
> > >  u32 ??
> > This is done based on the feedback provided previously by Geert [0].
> >
> > > > +     u8 pin:5;
> > >
> > >  u32 ??
> > >
> > ditto.
> >
>
> As per[0] suggestion is,
>
> As cfg only contains the lower bits (PIN_CFG_*), I think you can fit
> everything in a u32:
>
>     u32 cfg: 20;
>     u32 port: 5;
>     u32 pin: 3;
>
Ouch my bad, i'll send a v5 with this change.

Cheers,
Prabhakar
kernel test robot Jan. 13, 2024, 2:59 p.m. UTC | #3
Hi Prabhakar,

kernel test robot noticed the following build errors:

[auto build test ERROR on geert-renesas-drivers/renesas-pinctrl]
[cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833
base:   https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl
patch link:    https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com
patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
config: openrisc-allyesconfig (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/config)
compiler: or1k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240113/202401132220.aTrR8ckA-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401132220.aTrR8ckA-lkp@intel.com/

All errors (new ones prefixed by >>):

      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:730:31: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
     730 |         u8 pinmap = FIELD_GET(PIN_CFG_PIN_MAP_MASK, cfg);
         |                               ^~~~~~~~~~~~~~~~~~~~
   In file included from include/linux/bitfield.h:10:
   drivers/pinctrl/renesas/pinctrl-rzg2l.c: At top level:
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1537 |         RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1537 |         RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1537 |         RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1537 |         RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1537 |         RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1537 |         RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[0]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1537:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1537 |         RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1538 |         RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1538 |         RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1538 |         RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1538 |         RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1538 |         RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1538 |         RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[1]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1538:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1538 |         RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1539 |         RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1539 |         RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1539 |         RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1539 |         RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1539 |         RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1539 |         RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[2]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1539:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1539 |         RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1540 |         RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1540 |         RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1540 |         RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1540 |         RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1540 |         RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1540 |         RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[3]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1540:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1540 |         RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1541 |         RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1541 |         RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1541 |         RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1541 |         RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1541 |         RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1541 |         RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[4]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1541:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1541 |         RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1542 |         RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1542 |         RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1542 |         RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1542 |         RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1542 |         RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1542 |         RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[5]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1542:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1542 |         RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1543 |         RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1543 |         RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1543 |         RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1543 |         RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1543 |         RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1543 |         RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[6]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1543:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1543 |         RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1544 |         RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1544 |         RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1544 |         RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1544 |         RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1544 |         RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1544 |         RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[7]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1544:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1544 |         RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1545 |         RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1545 |         RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1545 |         RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1545 |         RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1545 |         RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1545 |         RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[8]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1545:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1545 |         RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1546 |         RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1546 |         RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1546 |         RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1546 |         RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1546 |         RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1546 |         RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[9]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1546:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1546 |         RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1547 |         RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1547 |         RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1547 |         RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1547 |         RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1547 |         RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1547 |         RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[10]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1547:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1547 |         RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1548 |         RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1548 |         RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1548 |         RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1548 |         RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1548 |         RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1548 |         RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[11]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1548:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1548 |         RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1549 |         RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1549 |         RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1549 |         RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1549 |         RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1549 |         RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1549 |         RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[12]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1549:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1549 |         RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1550 |         RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1550 |         RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1550 |         RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1550 |         RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1550 |         RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1550 |         RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[13]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1550:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1550 |         RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1551 |         RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1551 |         RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1551 |         RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1551 |         RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1551 |         RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1551 |         RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[14]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1551:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1551 |         RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1552 |         RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1552 |         RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1552 |         RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1552 |         RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1552 |         RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1552 |         RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[15]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1552:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1552 |         RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1553 |         RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1553 |         RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1553 |         RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1553 |         RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1553 |         RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1553 |         RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[16]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1553:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1553 |         RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1554 |         RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1554 |         RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1554 |         RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1554 |         RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1554 |         RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1554 |         RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[17]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1554:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1554 |         RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1555 |         RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1555 |         RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1555 |         RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1555 |         RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1555 |         RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1555 |         RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[18]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1555:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1555 |         RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1556 |         RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1556 |         RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1556 |         RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1556 |         RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1556 |         RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: error: initializer element is not constant
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1556 |         RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:49: note: (near initialization for 'r9a07g044_gpio_configs[19]')
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                 ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1556:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1556 |         RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:135:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     135 |                 BUILD_BUG_ON_ZERO((_mask) == 0) +                       \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1557 |         RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:137:17: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     137 |                 BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
         |                 ^~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1557 |         RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/build_bug.h:16:51: error: bit-field '<anonymous>' width not an integer constant
      16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
         |                                                   ^
   include/linux/bitfield.h:118:33: note: in expansion of macro 'BUILD_BUG_ON_ZERO'
     118 | #define __BF_CHECK_POW2(n)      BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
         |                                 ^~~~~~~~~~~~~~~~~
   include/linux/bitfield.h:139:17: note: in expansion of macro '__BF_CHECK_POW2'
     139 |                 __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +  \
         |                 ^~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1557 |         RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:45:38: note: in definition of macro '__bf_shf'
      45 | #define __bf_shf(x) (__builtin_ffsll(x) - 1)
         |                                      ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:50: note: in expansion of macro 'FIELD_PREP_CONST'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                  ^~~~~~~~~~~~~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
         |                                         ^~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:67: note: in expansion of macro 'PIN_CFG_PIN_MAP_MASK'
      89 | #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
         |                                                                   ^~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:41: note: in expansion of macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
      97 | #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
         |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1557:9: note: in expansion of macro 'RZG2L_GPIO_PORT_PACK'
    1557 |         RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
         |         ^~~~~~~~~~~~~~~~~~~~
   include/linux/bits.h:35:18: warning: right shift count is negative [-Wshift-count-negative]
      35 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bitfield.h:141:64: note: in definition of macro 'FIELD_PREP_CONST'
     141 |                 (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
         |                                                                ^~~~~
   include/linux/bits.h:37:38: note: in expansion of macro '__GENMASK'
      37 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:41: note: in expansion of macro 'GENMASK'
      81 | #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)


vim +89 drivers/pinctrl/renesas/pinctrl-rzg2l.c

    84	
    85	/*
    86	 * m indicates the bitmap of supported pins, a is the register index
    87	 * and f is pin configuration capabilities supported.
    88	 */
  > 89	#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)	(FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
    90							 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
    91							 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
    92
kernel test robot Jan. 13, 2024, 8:40 p.m. UTC | #4
Hi Prabhakar,

kernel test robot noticed the following build errors:

[auto build test ERROR on geert-renesas-drivers/renesas-pinctrl]
[cannot apply to geert-renesas-devel/next linusw-pinctrl/devel linusw-pinctrl/for-next linus/master v6.7 next-20240112]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Prabhakar/pinctrl-renesas-rzg2l-Improve-code-for-readability/20240112-222833
base:   https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git renesas-pinctrl
patch link:    https://lore.kernel.org/r/20240112142621.13525-4-prabhakar.mahadev-lad.rj%40bp.renesas.com
patch subject: [PATCH v4 3/4] pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
config: powerpc-randconfig-r081-20240113 (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/config)
compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240114/202401140457.dWlCUkuN-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401140457.dWlCUkuN-lkp@intel.com/

All errors (new ones prefixed by >>):

   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
           (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
                                        ^
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                                                  ^~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                              ~~~~~~~~~^~~~~~
   include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
   #define __bf_shf(x) (__builtin_ffsll(x) - 1)
                                        ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1577:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
           (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
                                        ^
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                                                  ^~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                              ~~~~~~~~~^~~~~~
   include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
   #define __bf_shf(x) (__builtin_ffsll(x) - 1)
                                        ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1578:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
           (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
                                        ^
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                                                  ^~~~~
>> drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: error: anonymous bit-field has negative width (-1)
           RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
           ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:47: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ^
   include/linux/bitfield.h:137:3: note: expanded from macro 'FIELD_PREP_CONST'
                   BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
                   ^
   include/linux/build_bug.h:16:53: note: expanded from macro 'BUILD_BUG_ON_ZERO'
   #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
                                                       ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                              ~~~~~~~~~^~~~~~
   include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
   #define __bf_shf(x) (__builtin_ffsll(x) - 1)
                                        ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1579:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
           (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
                                        ^
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                                                  ^~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all)
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:39: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                              ~~~~~~~~~^~~~~~
   include/linux/bitfield.h:45:38: note: expanded from macro '__bf_shf'
   #define __bf_shf(x) (__builtin_ffsll(x) - 1)
                                        ^
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:1580:2: warning: shift count is negative [-Wshift-count-negative]
           RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:97:39: note: expanded from macro 'RZG2L_GPIO_PORT_PACK'
   #define RZG2L_GPIO_PORT_PACK(n, a, f)   RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
                                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:89:64: note: expanded from macro 'RZG2L_GPIO_PORT_SPARSE_PACK'
   #define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)    (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
                                                    ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/pinctrl/renesas/pinctrl-rzg2l.c:81:31: note: expanded from macro 'PIN_CFG_PIN_MAP_MASK'
   #define PIN_CFG_PIN_MAP_MASK            GENMASK(35, 28)
                                           ^
   include/linux/bits.h:37:31: note: expanded from macro 'GENMASK'
           (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
                                        ^
   include/linux/bits.h:35:11: note: expanded from macro '__GENMASK'
            (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
                    ^
   include/linux/bitfield.h:141:50: note: expanded from macro 'FIELD_PREP_CONST'
                   (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))  \
                                                                  ^~~~~


vim +1579 drivers/pinctrl/renesas/pinctrl-rzg2l.c

c4c4637eb57f2a Lad Prabhakar 2021-07-27  1535  
943be6806bed3f Lad Prabhakar 2024-01-12  1536  static const u64 r9a07g044_gpio_configs[] = {
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1537  	RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1538  	RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1539  	RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1540  	RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1541  	RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1542  	RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1543  	RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1544  	RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1545  	RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1546  	RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1547  	RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1548  	RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1549  	RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1550  	RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1551  	RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1552  	RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1553  	RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
fcfb63148c241a Biju Das      2021-09-22  1554  	RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1555  	RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1556  	RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1557  	RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1558  	RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1559  	RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1560  	RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1561  	RZG2L_GPIO_PORT_PACK(2, 0x28, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1562  	RZG2L_GPIO_PORT_PACK(2, 0x29, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1563  	RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1564  	RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1565  	RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1566  	RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1567  	RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1568  	RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1569  	RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1570  	RZG2L_GPIO_PORT_PACK(2, 0x31, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1571  	RZG2L_GPIO_PORT_PACK(2, 0x32, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1572  	RZG2L_GPIO_PORT_PACK(2, 0x33, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1573  	RZG2L_GPIO_PORT_PACK(2, 0x34, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
22972a2d5bc4ba Lad Prabhakar 2021-11-10  1574  	RZG2L_GPIO_PORT_PACK(3, 0x35, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1575  	RZG2L_GPIO_PORT_PACK(2, 0x36, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1576  	RZG2L_GPIO_PORT_PACK(3, 0x37, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1577  	RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1578  	RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27 @1579  	RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1580  	RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1581  	RZG2L_GPIO_PORT_PACK(4, 0x3c, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1582  	RZG2L_GPIO_PORT_PACK(4, 0x3d, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1583  	RZG2L_GPIO_PORT_PACK(4, 0x3e, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1584  	RZG2L_GPIO_PORT_PACK(4, 0x3f, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1585  	RZG2L_GPIO_PORT_PACK(5, 0x40, RZG2L_MPXED_PIN_FUNCS),
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1586  };
c4c4637eb57f2a Lad Prabhakar 2021-07-27  1587
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 8b8644d2c355..04bb21d564d4 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -57,6 +57,8 @@ 
 #define PIN_CFG_IOLH_C			BIT(13)
 #define PIN_CFG_SOFT_PS			BIT(14)
 #define PIN_CFG_OEN			BIT(15)
+#define PIN_CFG_VARIABLE		BIT(16)
+#define PIN_CFG_NOGPIO_INT		BIT(17)
 
 #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \
 					(PIN_CFG_IOLH_##group | \
@@ -76,17 +78,23 @@ 
 					 PIN_CFG_FILNUM | \
 					 PIN_CFG_FILCLKSEL)
 
-/*
- * n indicates number of pins in the port, a is the register index
- * and f is pin configuration capabilities supported.
- */
 #define PIN_CFG_PIN_MAP_MASK		GENMASK(35, 28)
 #define PIN_CFG_PIN_REG_MASK		GENMASK(27, 20)
 #define PIN_CFG_MASK			GENMASK(19, 0)
 
-#define RZG2L_GPIO_PORT_PACK(n, a, f)	((((1ULL << (n)) - 1) << 28) | \
-					 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
-					 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
+/*
+ * m indicates the bitmap of supported pins, a is the register index
+ * and f is pin configuration capabilities supported.
+ */
+#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f)	(FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
+						 FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
+						 FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
+
+/*
+ * n indicates number of pins in the port, a is the register index
+ * and f is pin configuration capabilities supported.
+ */
+#define RZG2L_GPIO_PORT_PACK(n, a, f)	RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
 
 /*
  * BIT(63) indicates dedicated pin, p is the register index while
@@ -200,6 +208,18 @@  struct rzg2l_dedicated_configs {
 	u64 config;
 };
 
+/**
+ * struct rzg2l_variable_pin_cfg - pin data cfg
+ * @cfg: port pin configuration
+ * @port: port number
+ * @pin: port pin
+ */
+struct rzg2l_variable_pin_cfg {
+	u32 cfg:20;
+	u8 port:5;
+	u8 pin:5;
+};
+
 struct rzg2l_pinctrl_data {
 	const char * const *port_pins;
 	const u64 *port_pin_configs;
@@ -208,6 +228,8 @@  struct rzg2l_pinctrl_data {
 	unsigned int n_port_pins;
 	unsigned int n_dedicated_pins;
 	const struct rzg2l_hwcfg *hwcfg;
+	const struct rzg2l_variable_pin_cfg *variable_pin_cfg;
+	unsigned int n_variable_pin_cfg;
 };
 
 /**
@@ -243,6 +265,143 @@  struct rzg2l_pinctrl {
 
 static const u16 available_ps[] = { 1800, 2500, 3300 };
 
+#ifdef CONFIG_RISCV
+static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl,
+					      u64 pincfg,
+					      unsigned int port,
+					      u8 pin)
+{
+	unsigned int i;
+
+	for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) {
+		if (pctrl->data->variable_pin_cfg[i].port == port &&
+		    pctrl->data->variable_pin_cfg[i].pin == pin)
+			return (pincfg & ~PIN_CFG_VARIABLE) | pctrl->data->variable_pin_cfg[i].cfg;
+	}
+
+	return 0;
+}
+
+static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = {
+	{
+		.port = 20,
+		.pin = 0,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 1,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 2,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_IEN  | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 3,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 4,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 5,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 6,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 20,
+		.pin = 7,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_IEN | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 1,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT
+	},
+	{
+		.port = 23,
+		.pin = 2,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 3,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 4,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 23,
+		.pin = 5,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 0,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 1,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 2,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 3,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 4,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_NOGPIO_INT,
+	},
+	{
+		.port = 24,
+		.pin = 5,
+		.cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+		       PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+		       PIN_CFG_NOGPIO_INT,
+	},
+};
+#endif
+
 static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
 				       u8 pin, u8 off, u8 func)
 {
@@ -1446,6 +1605,25 @@  static const u64 r9a07g043_gpio_configs[] = {
 	RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS),
 	RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS),
+#ifdef CONFIG_RISCV
+	/* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+				    PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+				    PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),			/* P19 */
+	RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE),				/* P20 */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+				    PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),			/* P21 */
+	RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
+			     PIN_CFG_IEN | PIN_CFG_NOGPIO_INT),				/* P22 */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE),			/* P23 */
+	RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE),				/* P24 */
+	RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF |
+				    PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
+				    PIN_CFG_NOGPIO_INT),				/* P25 */
+	0x0,										/* P26 */
+	0x0,										/* P27 */
+	RZG2L_GPIO_PORT_PACK(6, 0x0f, RZG2L_MPXED_PIN_FUNCS | PIN_CFG_NOGPIO_INT),	/* P28 */
+#endif
 };
 
 static const u64 r9a08g045_gpio_configs[] = {
@@ -1606,12 +1784,18 @@  static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = {
 						       PIN_CFG_IO_VMC_SD1)) },
 };
 
-static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data)
+static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl)
 {
+	const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq];
+	const struct rzg2l_pinctrl_data *data = pctrl->data;
+	u64 *pin_data = pin_desc->drv_data;
 	unsigned int gpioint;
 	unsigned int i;
 	u32 port, bit;
 
+	if (*pin_data & PIN_CFG_NOGPIO_INT)
+		return -EINVAL;
+
 	port = virq / 8;
 	bit = virq % 8;
 
@@ -1721,7 +1905,7 @@  static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
 	unsigned long flags;
 	int gpioint, irq;
 
-	gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data);
+	gpioint = rzg2l_gpio_get_gpioint(child, pctrl);
 	if (gpioint < 0)
 		return gpioint;
 
@@ -1907,6 +2091,13 @@  static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl)
 		if (i && !(i % RZG2L_PINS_PER_PORT))
 			j++;
 		pin_data[i] = pctrl->data->port_pin_configs[j];
+#ifdef CONFIG_RISCV
+		if (pin_data[i] & PIN_CFG_VARIABLE)
+			pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl,
+									 pin_data[i],
+									 j,
+									 i % RZG2L_PINS_PER_PORT);
+#endif
 		pins[i].drv_data = &pin_data[i];
 	}
 
@@ -2058,6 +2249,10 @@  static struct rzg2l_pinctrl_data r9a07g043_data = {
 	.n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT,
 	.n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common),
 	.hwcfg = &rzg2l_hwcfg,
+#ifdef CONFIG_RISCV
+	.variable_pin_cfg = r9a07g043f_variable_pin_cfg,
+	.n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg),
+#endif
 };
 
 static struct rzg2l_pinctrl_data r9a07g044_data = {