diff mbox series

[01/10] wifi: ath12k: change interface combination for P2P mode

Message ID 20240108082552.7227-2-quic_kangyang@quicinc.com
State Superseded
Headers show
Series wifi: ath12k: P2P support for WCN7850 | expand

Commit Message

Kang Yang Jan. 8, 2024, 8:25 a.m. UTC
Current interface combination doesn't support P2P mode. Change the
combination for P2P mode.

Also, there is a bug that when mesh is enabled but ap is not enabled.
In this situation, the mesh's max_interface of interface combination
won't be set.

So assign the max_interfaces for mesh directly.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: ed7e818a7b50 ("wifi: ath12k: fix and enable AP mode for WCN7850")
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

Comments

Jeff Johnson Jan. 8, 2024, 5:59 p.m. UTC | #1
On 1/8/2024 12:25 AM, Kang Yang wrote:
> Current interface combination doesn't support P2P mode. Change the
> combination for P2P mode.
> 
> Also, there is a bug that when mesh is enabled but ap is not enabled.
> In this situation, the mesh's max_interface of interface combination
> won't be set.
> 
> So assign the max_interfaces for mesh directly.
> 
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
> 
> Fixes: ed7e818a7b50 ("wifi: ath12k: fix and enable AP mode for WCN7850")
> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
> ---
>  drivers/net/wireless/ath/ath12k/mac.c | 23 +++++++++++++++++++----

Qualcomm Innovation Center copyright missing 2024
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 88cec54c6c2e..813808aeba32 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -7259,9 +7259,10 @@  static int ath12k_mac_setup_iface_combinations(struct ath12k *ar)
 	struct ieee80211_iface_combination *combinations;
 	struct ieee80211_iface_limit *limits;
 	int n_limits, max_interfaces;
-	bool ap, mesh;
+	bool ap, mesh, p2p;
 
 	ap = ab->hw_params->interface_modes & BIT(NL80211_IFTYPE_AP);
+	p2p = ab->hw_params->interface_modes & BIT(NL80211_IFTYPE_P2P_DEVICE);
 
 	mesh = IS_ENABLED(CONFIG_MAC80211_MESH) &&
 		ab->hw_params->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT);
@@ -7270,9 +7271,15 @@  static int ath12k_mac_setup_iface_combinations(struct ath12k *ar)
 	if (!combinations)
 		return -ENOMEM;
 
-	if (ap || mesh) {
+	if ((ap || mesh) && !p2p) {
 		n_limits = 2;
 		max_interfaces = 16;
+	} else if (p2p) {
+		n_limits = 3;
+		if (ap || mesh)
+			max_interfaces = 16;
+		else
+			max_interfaces = 3;
 	} else {
 		n_limits = 1;
 		max_interfaces = 1;
@@ -7287,14 +7294,22 @@  static int ath12k_mac_setup_iface_combinations(struct ath12k *ar)
 	limits[0].max = 1;
 	limits[0].types |= BIT(NL80211_IFTYPE_STATION);
 
-	if (ap) {
+	if (ap || mesh || p2p)
 		limits[1].max = max_interfaces;
+
+	if (ap)
 		limits[1].types |= BIT(NL80211_IFTYPE_AP);
-	}
 
 	if (mesh)
 		limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
 
+	if (p2p) {
+		limits[1].types |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+				   BIT(NL80211_IFTYPE_P2P_GO);
+		limits[2].max = 1;
+		limits[2].types |= BIT(NL80211_IFTYPE_P2P_DEVICE);
+	}
+
 	combinations[0].limits = limits;
 	combinations[0].n_limits = n_limits;
 	combinations[0].max_interfaces = max_interfaces;