@@ -3451,6 +3451,162 @@ usb_1_role_switch: endpoint {
};
};
+ cci0: cci@ac4a000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4a000 0 0x1000>;
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci0_default>;
+ pinctrl-1 = <&cci0_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac4b000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4b000 0 0x1000>;
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci1_default>;
+ pinctrl-1 = <&cci1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac4c000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4c000 0 0x1000>;
+ interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci2_default>;
+ pinctrl-1 = <&cci2_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci3: cci@ac4d000 {
+ compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4d000 0 0x1000>;
+ interrupts = <GIC_SPI 650 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CCI_3_CLK>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci3_default>;
+ pinctrl-1 = <&cci3_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci3_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci3_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sc8280xp-camcc";
reg = <0 0x0ad00000 0 0x20000>;
@@ -4076,6 +4232,166 @@ tlmm: pinctrl@f100000 {
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 230>;
wakeup-parent = <&pdc>;
+
+ cci0_default: cci0-default-state {
+ cci0_i2c0_default: cci0-i2c0-default-pins {
+ /* cci_i2c_sda0, cci_i2c_scl0 */
+ pins = "gpio113", "gpio114";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci0_i2c1_default: cci0-i2c1-default-pins {
+ /* cci_i2c_sda1, cci_i2c_scl1 */
+ pins = "gpio115", "gpio116";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci0_sleep: cci0-sleep-state {
+ cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+ /* cci_i2c_sda0, cci_i2c_scl0 */
+ pins = "gpio113", "gpio114";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+
+ cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+ /* cci_i2c_sda1, cci_i2c_scl1 */
+ pins = "gpio115", "gpio116";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+ };
+
+ cci1_default: cci1-default-state {
+ cci1_i2c0_default: cci1-i2c0-default-pins {
+ /* cci_i2c_sda2, cci_i2c_scl2 */
+ pins = "gpio10","gpio11";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci1_i2c1_default: cci1-i2c1-default-pins {
+ /* cci_i2c_sda3, cci_i2c_scl3 */
+ pins = "gpio123","gpio124";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci1_sleep: cci1-sleep-state {
+ cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+ /* cci_i2c_sda2, cci_i2c_scl2 */
+ pins = "gpio10","gpio11";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+ /* cci_i2c_sda3, cci_i2c_scl3 */
+ pins = "gpio123","gpio124";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci2_default: cci2-default-state {
+ cci2_i2c0_default: cci2-i2c0-default-pins {
+ /* cci_i2c_sda4, cci_i2c_scl4 */
+ pins = "gpio117","gpio118";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci2_i2c1_default: cci2-i2c1-default-pins {
+ /* cci_i2c_sda5, cci_i2c_scl5 */
+ pins = "gpio12","gpio13";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci2_sleep: cci2-sleep-state {
+ cci2_i2c0_sleep: cci2-i2c0-sleep-pins {
+ /* cci_i2c_sda4, cci_i2c_scl4 */
+ pins = "gpio117","gpio118";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci2_i2c1_sleep: cci2-i2c1-sleep-pins {
+ /* cci_i2c_sda5, cci_i2c_scl5 */
+ pins = "gpio12","gpio13";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci3_default: cci3-default-state {
+ cci3_i2c0_default: cci3-i2c0-default-pins {
+ /* cci_i2c_sda6, cci_i2c_scl6 */
+ pins = "gpio145","gpio146";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci3_i2c1_default: cci3-i2c1-default-pins {
+ /* cci_i2c_sda7, cci_i2c_scl7 */
+ pins = "gpio164","gpio165";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci3_sleep: cci3-sleep-state {
+ cci3_i2c0_sleep: cci3-i2c0-sleep-pins {
+ /* cci_i2c_sda6, cci_i2c_scl6 */
+ pins = "gpio145","gpio146";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci3_i2c1_sleep: cci3-i2c1-sleep-pins {
+ /* cci_i2c_sda7, cci_i2c_scl7 */
+ pins = "gpio164","gpio165";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
};
apps_smmu: iommu@15000000 {
sc8280xp has four Camera Control Interface (CCI) blocks which pinout to two I2C master controllers for each CCI. The CCI I2C pins are not muxed so we define them in the dtsi. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 316 +++++++++++++++++++++++++++++++++ 1 file changed, 316 insertions(+)