diff mbox series

[v1] media: ov08x40: Avoid sensor probing in D0 state

Message ID 20240105102008.2879073-1-jason.z.chen@intel.com
State New
Headers show
Series [v1] media: ov08x40: Avoid sensor probing in D0 state | expand

Commit Message

Chen, Jason Z Jan. 5, 2024, 10:20 a.m. UTC 
From: Jason Chen <jason.z.chen@intel.com>

When the system enters the D0 state and attempt to probe the device,
another component, such as LED, will also be pulled high due to the
hardware design. It's advisable to keep the device being probed in
a different D state.

Signed-off-by: Jason Chen <jason.z.chen@intel.com>
---
 drivers/media/i2c/ov08x40.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index 8f24be08c7b..f46cf0eb6c1 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -3226,6 +3226,7 @@  static int ov08x40_probe(struct i2c_client *client)
 {
 	struct ov08x40 *ov08x;
 	int ret;
+	bool full_power;
 
 	/* Check HW config */
 	ret = ov08x40_check_hwcfg(&client->dev);
@@ -3241,11 +3242,14 @@  static int ov08x40_probe(struct i2c_client *client)
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&ov08x->sd, client, &ov08x40_subdev_ops);
 
-	/* Check module identity */
-	ret = ov08x40_identify_module(ov08x);
-	if (ret) {
-		dev_err(&client->dev, "failed to find sensor: %d\n", ret);
-		return ret;
+	full_power = acpi_dev_state_d0(&client->dev);
+	if (full_power) {
+		/* Check module identity */
+		ret = ov08x40_identify_module(ov08x);
+		if (ret) {
+			dev_err(&client->dev, "failed to find sensor: %d\n", ret);
+			return ret;
+		}
 	}
 
 	/* Set default mode to max resolution */
@@ -3277,7 +3281,8 @@  static int ov08x40_probe(struct i2c_client *client)
 	 * Device is already turned on by i2c-core with ACPI domain PM.
 	 * Enable runtime PM and turn off the device.
 	 */
-	pm_runtime_set_active(&client->dev);
+	if (full_power)
+		pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
 	pm_runtime_idle(&client->dev);
 
@@ -3321,6 +3326,7 @@  static struct i2c_driver ov08x40_i2c_driver = {
 	},
 	.probe = ov08x40_probe,
 	.remove = ov08x40_remove,
+	.flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
 };
 
 module_i2c_driver(ov08x40_i2c_driver);