diff mbox series

[v5,1/4] ASoC: dt-bindings: move tas2563 from tas2562.yaml to tas2781.yaml

Message ID 20240104145721.1398-1-shenghao-ding@ti.com
State Accepted
Commit 3dbb4e3602d217d7139b95a36077a6b7252dc290
Headers show
Series [v5,1/4] ASoC: dt-bindings: move tas2563 from tas2562.yaml to tas2781.yaml | expand

Commit Message

Shenghao Ding Jan. 4, 2024, 2:57 p.m. UTC 
Move tas2563 from tas2562.yaml to tas2781.yaml to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>

---
Change in v5:
 - remove tas2563, which will be move to tas2781 driver.
 - Add more comments on why to move tas2563 to tas2781 driver.
 - Provide rationale in terms of bindings and hardware, not in terms of driver.
   Or at least not only.
 - Reorder chip, tas2563 is first, tas2781 is second.
 - Add datasheet linkings.
 - squash both tas2562 and tas2781 binding patches.
 - Put allOf: to the end of the file, after required: block.
 - restore the widest constraints of minItems/maxItems at reg.
---
 .../devicetree/bindings/sound/tas2562.yaml    |  2 -
 .../devicetree/bindings/sound/ti,tas2781.yaml | 78 +++++++++++++++----
 2 files changed, 63 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
index f01c0dde0cf7..d28c102c0ce7 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -18,7 +18,6 @@  description: |
 
   Specifications about the audio amplifier can be found at:
     https://www.ti.com/lit/gpn/tas2562
-    https://www.ti.com/lit/gpn/tas2563
     https://www.ti.com/lit/gpn/tas2564
     https://www.ti.com/lit/gpn/tas2110
 
@@ -29,7 +28,6 @@  properties:
   compatible:
     enum:
       - ti,tas2562
-      - ti,tas2563
       - ti,tas2564
       - ti,tas2110
 
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
index a69e6c223308..976238689249 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -5,36 +5,46 @@ 
 $id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments TAS2781 SmartAMP
+title: Texas Instruments TAS2563/TAS2781 SmartAMP
 
 maintainers:
   - Shenghao Ding <shenghao-ding@ti.com>
 
-description:
-  The TAS2781 is a mono, digital input Class-D audio amplifier
-  optimized for efficiently driving high peak power into small
-  loudspeakers. An integrated on-chip DSP supports Texas Instruments
-  Smart Amp speaker protection algorithm. The integrated speaker
-  voltage and current sense provides for real time
+description: |
+  The TAS2563/TAS2781 is a mono, digital input Class-D audio
+  amplifier optimized for efficiently driving high peak power into
+  small loudspeakers. An integrated on-chip DSP supports Texas
+  Instruments Smart Amp speaker protection algorithm. The
+  integrated speaker voltage and current sense provides for real time
   monitoring of loudspeaker behavior.
 
-allOf:
-  - $ref: dai-common.yaml#
+  Specifications about the audio amplifier can be found at:
+    https://www.ti.com/lit/gpn/tas2563
+    https://www.ti.com/lit/gpn/tas2781
 
 properties:
   compatible:
-    enum:
-      - ti,tas2781
+    description: |
+      ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated
+      DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM.
+
+      ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker
+      Protection and Audio Processing, 16/20/24/32bit stereo I2S or
+      multichannel TDM.
+    oneOf:
+      - items:
+          - enum:
+              - ti,tas2563
+          - const: ti,tas2781
+      - enum:
+          - ti,tas2781
 
   reg:
     description:
-      I2C address, in multiple tas2781s case, all the i2c address
+      I2C address, in multiple-AMP case, all the i2c address
       aggregate as one Audio Device to support multiple audio slots.
     maxItems: 8
     minItems: 1
-    items:
-      minimum: 0x38
-      maximum: 0x3f
 
   reset-gpios:
     maxItems: 1
@@ -49,6 +59,44 @@  required:
   - compatible
   - reg
 
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2563
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 4
+          minItems: 1
+          items:
+            minimum: 0x4c
+            maximum: 0x4f
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas2781
+    then:
+      properties:
+        reg:
+          description:
+            I2C address, in multiple-AMP case, all the i2c address
+            aggregate as one Audio Device to support multiple audio slots.
+          maxItems: 8
+          minItems: 1
+          items:
+            minimum: 0x38
+            maximum: 0x3f
+
 additionalProperties: false
 
 examples: