diff mbox series

[v4,4/8] RDMA/hfi1: Use RMW accessors for changing LNKCTL2

Message ID 20240105112547.7301-5-ilpo.jarvinen@linux.intel.com
State Accepted
Commit 8f3b7103b41314d26e2653e9ccca29480123a204
Headers show
Series Add PCIe bandwidth controller | expand

Commit Message

Ilpo Järvinen Jan. 5, 2024, 11:25 a.m. UTC
Don't assume that only the driver would be accessing LNKCTL2. In the
case of upstream (parent), the driver does not even own the device it's
changing the registers for.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value. This change is also useful as
a cleanup.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
---
 drivers/infiniband/hw/hfi1/pcie.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 119ec2f1382b..7133964749f8 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -1207,14 +1207,11 @@  int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 		    (u32)lnkctl2);
 	/* only write to parent if target is not as high as ours */
 	if ((lnkctl2 & PCI_EXP_LNKCTL2_TLS) < target_vector) {
-		lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
-		lnkctl2 |= target_vector;
-		dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
-			    (u32)lnkctl2);
-		ret = pcie_capability_write_word(parent,
-						 PCI_EXP_LNKCTL2, lnkctl2);
+		ret = pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL2,
+							 PCI_EXP_LNKCTL2_TLS,
+							 target_vector);
 		if (ret) {
-			dd_dev_err(dd, "Unable to write to PCI config\n");
+			dd_dev_err(dd, "Unable to change parent PCI target speed\n");
 			return_error = 1;
 			goto done;
 		}
@@ -1223,22 +1220,11 @@  int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 	}
 
 	dd_dev_info(dd, "%s: setting target link speed\n", __func__);
-	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
+	ret = pcie_capability_clear_and_set_word(dd->pcidev, PCI_EXP_LNKCTL2,
+						 PCI_EXP_LNKCTL2_TLS,
+						 target_vector);
 	if (ret) {
-		dd_dev_err(dd, "Unable to read from PCI config\n");
-		return_error = 1;
-		goto done;
-	}
-
-	dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
-		    (u32)lnkctl2);
-	lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
-	lnkctl2 |= target_vector;
-	dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
-		    (u32)lnkctl2);
-	ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
-	if (ret) {
-		dd_dev_err(dd, "Unable to write to PCI config\n");
+		dd_dev_err(dd, "Unable to change device PCI target speed\n");
 		return_error = 1;
 		goto done;
 	}