diff mbox series

[PULL,69/71] hw/m68k/mcf5206: Embed m5206_timer_state in m5206_mbar_state

Message ID 20240105154307.21385-70-philmd@linaro.org
State Accepted
Commit 5e077a77670d36975cc0dc885d2e9d9f67ab14c1
Headers show
Series [PULL,01/71] meson: Allow building binary with no target-specific files in hw/ | expand

Commit Message

Philippe Mathieu-Daudé Jan. 5, 2024, 3:43 p.m. UTC 
From: Thomas Huth <huth@tuxfamily.org>

There's no need to explicitely allocate the memory here, we can
simply embed it into the m5206_mbar_state instead.

Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231221122939.11001-1-huth@tuxfamily.org>
---
 hw/m68k/mcf5206.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/hw/m68k/mcf5206.c b/hw/m68k/mcf5206.c
index a46a23538d..183fd3cc08 100644
--- a/hw/m68k/mcf5206.c
+++ b/hw/m68k/mcf5206.c
@@ -148,15 +148,11 @@  static void m5206_timer_write(m5206_timer_state *s, uint32_t addr, uint32_t val)
     m5206_timer_update(s);
 }
 
-static m5206_timer_state *m5206_timer_init(qemu_irq irq)
+static void m5206_timer_init(m5206_timer_state *s, qemu_irq irq)
 {
-    m5206_timer_state *s;
-
-    s = g_new0(m5206_timer_state, 1);
     s->timer = ptimer_init(m5206_timer_trigger, s, PTIMER_POLICY_LEGACY);
     s->irq = irq;
     m5206_timer_reset(s);
-    return s;
 }
 
 /* System Integration Module.  */
@@ -167,7 +163,7 @@  typedef struct {
     M68kCPU *cpu;
     MemoryRegion iomem;
     qemu_irq *pic;
-    m5206_timer_state *timer[2];
+    m5206_timer_state timer[2];
     DeviceState *uart[2];
     uint8_t scr;
     uint8_t icr[14];
@@ -293,9 +289,9 @@  static uint64_t m5206_mbar_read(m5206_mbar_state *s,
                                 uint16_t offset, unsigned size)
 {
     if (offset >= 0x100 && offset < 0x120) {
-        return m5206_timer_read(s->timer[0], offset - 0x100);
+        return m5206_timer_read(&s->timer[0], offset - 0x100);
     } else if (offset >= 0x120 && offset < 0x140) {
-        return m5206_timer_read(s->timer[1], offset - 0x120);
+        return m5206_timer_read(&s->timer[1], offset - 0x120);
     } else if (offset >= 0x140 && offset < 0x160) {
         return mcf_uart_read(s->uart[0], offset - 0x140, size);
     } else if (offset >= 0x180 && offset < 0x1a0) {
@@ -333,10 +329,10 @@  static void m5206_mbar_write(m5206_mbar_state *s, uint16_t offset,
                              uint64_t value, unsigned size)
 {
     if (offset >= 0x100 && offset < 0x120) {
-        m5206_timer_write(s->timer[0], offset - 0x100, value);
+        m5206_timer_write(&s->timer[0], offset - 0x100, value);
         return;
     } else if (offset >= 0x120 && offset < 0x140) {
-        m5206_timer_write(s->timer[1], offset - 0x120, value);
+        m5206_timer_write(&s->timer[1], offset - 0x120, value);
         return;
     } else if (offset >= 0x140 && offset < 0x160) {
         mcf_uart_write(s->uart[0], offset - 0x140, value, size);
@@ -598,8 +594,8 @@  static void mcf5206_mbar_realize(DeviceState *dev, Error **errp)
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
 
     s->pic = qemu_allocate_irqs(m5206_mbar_set_irq, s, 14);
-    s->timer[0] = m5206_timer_init(s->pic[9]);
-    s->timer[1] = m5206_timer_init(s->pic[10]);
+    m5206_timer_init(&s->timer[0], s->pic[9]);
+    m5206_timer_init(&s->timer[1], s->pic[10]);
     s->uart[0] = mcf_uart_create(s->pic[12], serial_hd(0));
     s->uart[1] = mcf_uart_create(s->pic[13], serial_hd(1));
 }