| Message ID | 1704367382-29979-1-git-send-email-quic_zhenhuah@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: mtd: Change the schema for nodename which includes "sram" | expand |
On Thu, Jan 04, 2024 at 07:23:02PM +0800, Zhenhua Huang wrote: > Node name which includes "sram" not only represents MTD devices, but also > lots of sram devices(eg, qcom,imem.yaml, rules in folder sram/*). > > To avoid the conflicts, change the schema as: > - if node name includes "sram", must select "compatible" to match > (I have listed all "comptible" string in mtd.yaml by searching > drivers/mtd/* to find applicable drivers) > - if node name is nand/flash, use "nodename" to select. > You're right, it doesn't seem appropriate for the mtd binding to be selected for nodes intended to match e.g. the qcom,imem binding. > Fixes: 7bdc671822e9 ("dt-bindings: mtd: physmap: Reuse the generic definitions") > Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> > --- > Hello, > > Tested a few devicetree nodes, which confirms: > "qcom,imem.yaml" which in sram/ not matches with mtd.yaml anymore. > All nodes include string "sram" must have "compatible" which listed in > mtd.yaml to be matched. > > Current I just modify the rule for "sram" as it is definitely conflicting with > rules in sram/*. I have not much backgrounds on nand/flash whether they may have > similar conflicts. > > Documentation/devicetree/bindings/mtd/mtd.yaml | 24 +++++++++++++++++++++--- > 1 file changed, 21 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml > index f322290..1704437 100644 > --- a/Documentation/devicetree/bindings/mtd/mtd.yaml > +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml > @@ -10,10 +10,28 @@ maintainers: > - Miquel Raynal <miquel.raynal@bootlin.com> > - Richard Weinberger <richard@nod.at> > > -properties: > - $nodename: The mtd binding is $ref'ed by other bindings, similar to how we do with other bindings of common properties. So, I think the problem with mtd is that this ($nodename) turns into a "select" automatically, which causes this binding to match nodes by name, rather than just those $ref'ing it. We should be able to avoid the automatically created select from the $nodename, and rely on $ref, by just adding: select: false Regards, Bjorn > - pattern: "^(flash|.*sram|nand)(@.*)?$" > +select: > + if: > + properties: > + $nodename: > + pattern: "^.*sram(@.*)?$" > + then: > + properties: > + compatible: > + enum: > + - arm,vexpress-psram > + - cypress,cy7c1019dv33-10zsxi > + - microchip,48l640 > + - mtd-ram > + else: > + properties: > + $nodename: > + pattern: "^(flash|nand)(@.*)?$" > > + required: > + - $nodename > + > +properties: > label: > description: > User-defined MTD device name. Can be used to assign user friendly > -- > 2.7.4 >
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml index f322290..1704437 100644 --- a/Documentation/devicetree/bindings/mtd/mtd.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd.yaml @@ -10,10 +10,28 @@ maintainers: - Miquel Raynal <miquel.raynal@bootlin.com> - Richard Weinberger <richard@nod.at> -properties: - $nodename: - pattern: "^(flash|.*sram|nand)(@.*)?$" +select: + if: + properties: + $nodename: + pattern: "^.*sram(@.*)?$" + then: + properties: + compatible: + enum: + - arm,vexpress-psram + - cypress,cy7c1019dv33-10zsxi + - microchip,48l640 + - mtd-ram + else: + properties: + $nodename: + pattern: "^(flash|nand)(@.*)?$" + required: + - $nodename + +properties: label: description: User-defined MTD device name. Can be used to assign user friendly
Node name which includes "sram" not only represents MTD devices, but also lots of sram devices(eg, qcom,imem.yaml, rules in folder sram/*). To avoid the conflicts, change the schema as: - if node name includes "sram", must select "compatible" to match (I have listed all "comptible" string in mtd.yaml by searching drivers/mtd/* to find applicable drivers) - if node name is nand/flash, use "nodename" to select. Fixes: 7bdc671822e9 ("dt-bindings: mtd: physmap: Reuse the generic definitions") Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> --- Hello, Tested a few devicetree nodes, which confirms: "qcom,imem.yaml" which in sram/ not matches with mtd.yaml anymore. All nodes include string "sram" must have "compatible" which listed in mtd.yaml to be matched. Current I just modify the rule for "sram" as it is definitely conflicting with rules in sram/*. I have not much backgrounds on nand/flash whether they may have similar conflicts. Documentation/devicetree/bindings/mtd/mtd.yaml | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-)