diff mbox series

Input: goodix - Accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

Message ID 20231223141650.10679-1-hdegoede@redhat.com
State Accepted
Commit 180a8f12c21f41740fee09ca7f7aa98ff5bb99f8
Headers show
Series Input: goodix - Accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0 | expand

Commit Message

Hans de Goede Dec. 23, 2023, 2:16 p.m. UTC
Some devices list 3 Gpio resources in the ACPI resource list for
the touchscreen:

1. GpioInt resource pointing to the GPIO used for the interrupt
2. GpioIo resource pointing to the reset GPIO
3. GpioIo resource pointing to the GPIO used for the interrupt

Note how the third extra GpioIo resource really is a duplicate
of the GpioInt provided info.

Ignore this extra GPIO, treating this setup the same as gpio_count == 2 &&
gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook
Colossus W803 rugged tablet and likely also on the CyberBook_T116K.

Reported-by: Maarten van der Schrieck
Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22
Suggested-by: Maarten van der Schrieck
Tested-by: Maarten van der Schrieck
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Note Maarten has requested for their email to not be made public.
---
 drivers/input/touchscreen/goodix.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Dmitry Torokhov Jan. 19, 2024, 8:55 a.m. UTC | #1
On Sat, Dec 23, 2023 at 03:16:50PM +0100, Hans de Goede wrote:
> Some devices list 3 Gpio resources in the ACPI resource list for
> the touchscreen:
> 
> 1. GpioInt resource pointing to the GPIO used for the interrupt
> 2. GpioIo resource pointing to the reset GPIO
> 3. GpioIo resource pointing to the GPIO used for the interrupt
> 
> Note how the third extra GpioIo resource really is a duplicate
> of the GpioInt provided info.
> 
> Ignore this extra GPIO, treating this setup the same as gpio_count == 2 &&
> gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook
> Colossus W803 rugged tablet and likely also on the CyberBook_T116K.
> 
> Reported-by: Maarten van der Schrieck
> Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22
> Suggested-by: Maarten van der Schrieck
> Tested-by: Maarten van der Schrieck
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Applied, thank you.
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index af32fbe57b63..b068ff8afbc9 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -884,7 +884,8 @@  static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		}
 	}
 
-	if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+	/* Some devices with gpio_int_idx 0 list a third unused GPIO */
+	if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) {
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_first_gpios;
 	} else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {