@@ -11,7 +11,7 @@ maintainers:
description: >
The Qualcomm Light Pulse Generator consists of three different hardware blocks;
- a ramp generator with lookup table, the light pulse generator and a three
+ a ramp generator with lookup table (LUT), the light pulse generator and a three
channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
properties:
@@ -63,6 +63,29 @@ properties:
- description: dtest line to attach
- description: flags for the attachment
+ nvmem:
+ description: >
+ This property is required for PMICs that supports PPG, which is when a
+ PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+ of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+ and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+ to both SDAM modules need to be specified.
+ minItems: 1
+ maxItems: 2
+
+ nvmem-names:
+ minItems: 1
+ items:
+ - const: lpg_chan_sdam
+ - const: lut_sdam
+
+ qcom,pbs:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: >
+ Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+ PBS node is used to trigger LPG pattern sequences for PMICs that support
+ single SDAM PPG.
+
multi-led:
type: object
$ref: leds-class-multicolor.yaml#
@@ -106,6 +129,32 @@ required:
additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,pmi632-lpg
+ then:
+ properties:
+ nvmem:
+ maxItems: 1
+ nvmem-names:
+ maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8350c-pwm
+ - qcom,pm8550-pwm
+ then:
+ properties:
+ nvmem:
+ minItems: 2
+ nvmem-names:
+ minItems: 2
+
examples:
- |
#include <dt-bindings/leds/common.h>
@@ -191,4 +240,35 @@ examples:
compatible = "qcom,pm8916-pwm";
#pwm-cells = <2>;
};
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ led-controller {
+ compatible = "qcom,pmi632-lpg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+ nvmem-names = "lpg_chan_sdam";
+ nvmem = <&pmi632_sdam_7>;
+ qcom,pbs = <&pmi632_pbs_client3>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ label = "red";
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ label = "green";
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ label = "blue";
+ };
+ };
+
...