diff mbox series

[2/2] clk: samsung: Fix typo error and extra space

Message ID 20231219115834.65720-2-v.pavani@samsung.com
State New
Headers show
Series None | expand

Commit Message

Varada Pavani Dec. 19, 2023, 11:58 a.m. UTC
Remove extra spaces and fix spelling mistakes in 'drivers/
clk/samsung/clk-cpu.c' and 'drivers/clk/samsung/clk-cpu.h'

Signed-off-by: Varada Pavani <v.pavani@samsung.com>
---
 drivers/clk/samsung/clk-cpu.c | 6 +++---
 drivers/clk/samsung/clk-cpu.h | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

Comments

Varada Pavani Dec. 26, 2023, 5:05 p.m. UTC | #1
Hi Krzysztof,

-----Original Message-----
From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@linaro.org] 
Sent: 19 December 2023 17:36
To: Varada Pavani <v.pavani@samsung.com>; mturquette@baylibre.com; sboyd@kernel.org; krzysztof.kozlowski+dt@linaro.org; conor+dt@kernel.org; linux-clk@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; s.nawrocki@samsung.com; tomasz.figa@gmail.com
Cc: linux-samsung-soc@vger.kernel.org; alim.akhtar@samsung.com; aswani.reddy@samsung.com; pankaj.dubey@samsung.com
Subject: Re: [PATCH 2/2] clk: samsung: Fix typo error and extra space

On 19/12/2023 12:58, Varada Pavani wrote:
> Remove extra spaces and fix spelling mistakes in 'drivers/ 
> clk/samsung/clk-cpu.c' and 'drivers/clk/samsung/clk-cpu.h'
> 
> Signed-off-by: Varada Pavani <v.pavani@samsung.com>
> ---
>  drivers/clk/samsung/clk-cpu.c | 6 +++---  
> drivers/clk/samsung/clk-cpu.h | 2 +-
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-cpu.c 
> b/drivers/clk/samsung/clk-cpu.c index 3e62ade120c5..18568b8b1b9b 
> 100644
> --- a/drivers/clk/samsung/clk-cpu.c
> +++ b/drivers/clk/samsung/clk-cpu.c
> @@ -19,7 +19,7 @@
>   * clock and the corresponding rate changes of the auxillary clocks of the CPU
>   * domain. The platform clock driver provides a clock register configuration
>   * for each configurable rate which is then used to program the clock 
> hardware
> - * registers to acheive a fast co-oridinated rate change for all the 
> CPU domain
> + * registers to achieve a fast co-oridinated rate change for all the 
> + CPU domain
>   * clocks.
>   *
>   * On a rate change request for the CPU clock, the rate change is 
> propagated @@ -181,7 +181,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
>  	 * If the old parent clock speed is less than the clock speed of
>  	 * the alternate parent, then it should be ensured that at no point
>  	 * the armclk speed is more than the old_prate until the dividers are
> -	 * set.  Also workaround the issue of the dividers being set to lower
> +	 * set. Also workaround the issue of the dividers being set to lower

Why? The double-space is correct.

Okay, I couldn’t see any double space at the end of the statement apart from this line and below one. So updated to have uniformity.


>  	 * values before the parent clock speed is set to new lower speed
>  	 * (this can result in too high speed of armclk output clocks).
>  	 */
> @@ -303,7 +303,7 @@ static int exynos5433_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
>  	 * If the old parent clock speed is less than the clock speed of
>  	 * the alternate parent, then it should be ensured that at no point
>  	 * the armclk speed is more than the old_prate until the dividers are
> -	 * set.  Also workaround the issue of the dividers being set to lower
> +	 * set. Also workaround the issue of the dividers being set to lower

Why?

Same as above.

>  	 * values before the parent clock speed is set to new lower speed
>  	 * (this can result in too high speed of armclk output clocks).
>  	 */
> diff --git a/drivers/clk/samsung/clk-cpu.h 
> b/drivers/clk/samsung/clk-cpu.h index fc9f67a3b22e..e0a1651174e6 
> 100644
> --- a/drivers/clk/samsung/clk-cpu.h
> +++ b/drivers/clk/samsung/clk-cpu.h
> @@ -33,7 +33,7 @@ struct exynos_cpuclk_cfg_data {
>   * @hw:	handle between CCF and CPU clock.
>   * @alt_parent: alternate parent clock to use when switching the speed
>   *	of the primary parent clock.
> - * @ctrl_base:	base address of the clock controller.
> + * @ctrl_base: base address of the clock controller.

Why only here and not in other places?

Will fix in V2 for this file.

Thanks for the review!

Best regards,
Krzysztof
Krzysztof Kozlowski Dec. 27, 2023, 11:40 a.m. UTC | #2
On 26/12/2023 18:05, Varada Pavani wrote:
>> hardware
>> - * registers to acheive a fast co-oridinated rate change for all the 
>> CPU domain
>> + * registers to achieve a fast co-oridinated rate change for all the 
>> + CPU domain
>>   * clocks.
>>   *
>>   * On a rate change request for the CPU clock, the rate change is 
>> propagated @@ -181,7 +181,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
>>  	 * If the old parent clock speed is less than the clock speed of
>>  	 * the alternate parent, then it should be ensured that at no point
>>  	 * the armclk speed is more than the old_prate until the dividers are
>> -	 * set.  Also workaround the issue of the dividers being set to lower
>> +	 * set. Also workaround the issue of the dividers being set to lower
> 
> Why? The double-space is correct.
> 
> Okay, I couldn’t see any double space at the end of the statement apart from this line and below one. So updated to have uniformity.

Wait, there are only two statements here, so where do you expect double
space? There is no "one space at the end of the statement".

Your quoting is still not correct. Which part of above is quote of my
message, which yours?

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
index 3e62ade120c5..18568b8b1b9b 100644
--- a/drivers/clk/samsung/clk-cpu.c
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -19,7 +19,7 @@ 
  * clock and the corresponding rate changes of the auxillary clocks of the CPU
  * domain. The platform clock driver provides a clock register configuration
  * for each configurable rate which is then used to program the clock hardware
- * registers to acheive a fast co-oridinated rate change for all the CPU domain
+ * registers to achieve a fast co-oridinated rate change for all the CPU domain
  * clocks.
  *
  * On a rate change request for the CPU clock, the rate change is propagated
@@ -181,7 +181,7 @@  static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
 	 * If the old parent clock speed is less than the clock speed of
 	 * the alternate parent, then it should be ensured that at no point
 	 * the armclk speed is more than the old_prate until the dividers are
-	 * set.  Also workaround the issue of the dividers being set to lower
+	 * set. Also workaround the issue of the dividers being set to lower
 	 * values before the parent clock speed is set to new lower speed
 	 * (this can result in too high speed of armclk output clocks).
 	 */
@@ -303,7 +303,7 @@  static int exynos5433_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
 	 * If the old parent clock speed is less than the clock speed of
 	 * the alternate parent, then it should be ensured that at no point
 	 * the armclk speed is more than the old_prate until the dividers are
-	 * set.  Also workaround the issue of the dividers being set to lower
+	 * set. Also workaround the issue of the dividers being set to lower
 	 * values before the parent clock speed is set to new lower speed
 	 * (this can result in too high speed of armclk output clocks).
 	 */
diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h
index fc9f67a3b22e..e0a1651174e6 100644
--- a/drivers/clk/samsung/clk-cpu.h
+++ b/drivers/clk/samsung/clk-cpu.h
@@ -33,7 +33,7 @@  struct exynos_cpuclk_cfg_data {
  * @hw:	handle between CCF and CPU clock.
  * @alt_parent: alternate parent clock to use when switching the speed
  *	of the primary parent clock.
- * @ctrl_base:	base address of the clock controller.
+ * @ctrl_base: base address of the clock controller.
  * @lock: cpu clock domain register access lock.
  * @cfg: cpu clock rate configuration data.
  * @num_cfgs: number of array elements in @cfg array.