diff mbox series

[v2,20/32] dts: sdm845: import supporting dtsi files

Message ID 20231219-b4-qcom-common-target-v2-20-b6dd9704219e@linaro.org
State Superseded
Headers show
Series Qualcomm generic board support | expand

Commit Message

Caleb Connolly Dec. 19, 2023, 4:04 p.m. UTC
Import the PM8998 and PMI8998 PMIC DTSI files from Linux 6.7-rc3 as well
as the common audio codec in preperation for replacing board DTS files
with upstream.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 arch/arm/dts/pm8998.dtsi         | 130 +++++++++++++++++++++++++++++++++++++++
 arch/arm/dts/pmi8998.dtsi        |  98 +++++++++++++++++++++++++++++
 arch/arm/dts/sdm845-wcd9340.dtsi |  86 ++++++++++++++++++++++++++
 3 files changed, 314 insertions(+)

Comments

Neil Armstrong Dec. 21, 2023, 4:35 p.m. UTC | #1
On 19/12/2023 17:04, Caleb Connolly wrote:
> Import the PM8998 and PMI8998 PMIC DTSI files from Linux 6.7-rc3 as well
> as the common audio codec in preperation for replacing board DTS files
> with upstream.
> 
> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>   arch/arm/dts/pm8998.dtsi         | 130 +++++++++++++++++++++++++++++++++++++++
>   arch/arm/dts/pmi8998.dtsi        |  98 +++++++++++++++++++++++++++++
>   arch/arm/dts/sdm845-wcd9340.dtsi |  86 ++++++++++++++++++++++++++
>   3 files changed, 314 insertions(+)
> 

<snip>

Same as patch 19, with the commit id:

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm/dts/pm8998.dtsi b/arch/arm/dts/pm8998.dtsi
new file mode 100644
index 000000000000..3f82715392c6
--- /dev/null
+++ b/arch/arm/dts/pm8998.dtsi
@@ -0,0 +1,130 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm8998-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm8998_temp>;
+
+			trips {
+				pm8998_alert0: pm8998-alert0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm8998_crit: pm8998-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8998_lsid0: pmic@0 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8998_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm8998_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8998_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8998_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8998_coincell: charger@2800 {
+			compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
+			reg = <0x2800>;
+
+			status = "disabled";
+		};
+
+		pm8998_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm8998_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm-hc";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8998_gpios: gpio@c000 {
+			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8998_gpios 0 0 26>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pm8998_lsid1: pmic@1 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/dts/pmi8998.dtsi b/arch/arm/dts/pmi8998.dtsi
new file mode 100644
index 000000000000..cd3f0790fd42
--- /dev/null
+++ b/arch/arm/dts/pmi8998.dtsi
@@ -0,0 +1,98 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmi8998_lsid0: pmic@2 {
+		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8998_charger: charger@1000 {
+			compatible = "qcom,pmi8998-charger";
+			reg = <0x1000>;
+
+			interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "usb-plugin",
+					  "bat-ov",
+					  "wdog-bark",
+					  "usbin-icl-change";
+
+			io-channels = <&pmi8998_rradc 3>,
+				      <&pmi8998_rradc 4>;
+			io-channel-names = "usbin_i", "usbin_v";
+
+			status = "disabled";
+		};
+
+		pmi8998_gpios: gpio@c000 {
+			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8998_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8998_rradc: adc@4500 {
+			compatible = "qcom,pmi8998-rradc";
+			reg = <0x4500>;
+			#io-channel-cells = <1>;
+		};
+	};
+
+	pmi8998_lsid1: pmic@3 {
+		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "sc-err", "ocp";
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
+			};
+		};
+
+		pmi8998_lpg: pwm {
+			compatible = "qcom,pmi8998-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pmi8998_flash: led-controller@d300 {
+			compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pmi8998_wled: leds@d800 {
+			compatible = "qcom,pmi8998-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/dts/sdm845-wcd9340.dtsi b/arch/arm/dts/sdm845-wcd9340.dtsi
new file mode 100644
index 000000000000..c15d48860646
--- /dev/null
+++ b/arch/arm/dts/sdm845-wcd9340.dtsi
@@ -0,0 +1,86 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+&slim {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		wcd9340_ifd: ifd@0,0 {
+			compatible = "slim217,250";
+			reg = <0 0>;
+		};
+
+		wcd9340: codec@1,0 {
+			compatible = "slim217,250";
+			reg = <1 0>;
+			slim-ifc-dev = <&wcd9340_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clock-names = "extclk";
+			clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+
+			pinctrl-0 = <&wcd_intr_default>;
+			pinctrl-names = "default";
+
+			qcom,micbias1-microvolt = <1800000>;
+			qcom,micbias2-microvolt = <1800000>;
+			qcom,micbias3-microvolt = <1800000>;
+			qcom,micbias4-microvolt = <1800000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wcdgpio: gpio-controller@42 {
+				compatible = "qcom,wcd9340-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x42 0x2>;
+			};
+
+			swm: swm@c85 {
+				compatible = "qcom,soundwire-v1.3.0";
+				reg = <0xc85 0x40>;
+				interrupts-extended = <&wcd9340 20>;
+
+				qcom,dout-ports = <6>;
+				qcom,din-ports = <2>;
+				qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
+				qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
+				qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
+
+				#sound-dai-cells = <1>;
+				clocks = <&wcd9340>;
+				clock-names = "iface";
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	wcd_intr_default: wcd-intr-default-state {
+		pins = "gpio54";
+		function = "gpio";
+
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};