diff mbox series

[v6,3/3] riscv: dts: allwinner: d1: Add thermal sensor

Message ID 20231217210629.131486-4-bigunclemax@gmail.com
State New
Headers show
Series Add D1/T113s thermal sensor controller support | expand

Commit Message

Maksim Kiselev Dec. 17, 2023, 9:06 p.m. UTC
From: Maxim Kiselev <bigunclemax@gmail.com>

This patch adds a thermal sensor controller node for the D1/T113s.
Also it adds a THS calibration data cell to efuse node.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
---
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi      | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

Andre Przywara Dec. 18, 2023, 1:09 a.m. UTC | #1
On Mon, 18 Dec 2023 00:06:24 +0300
Maksim Kiselev <bigunclemax@gmail.com> wrote:

Hi,

> From: Maxim Kiselev <bigunclemax@gmail.com>
> 
> This patch adds a thermal sensor controller node for the D1/T113s.
> Also it adds a THS calibration data cell to efuse node.
> 
> Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
> ---
>  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi      | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index 5a9d7f5a75b4..6f5427d9cfbf 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -166,6 +166,19 @@ gpadc: adc@2009000 {
>  			#io-channel-cells = <1>;
>  		};
>  
> +		ths: thermal-sensor@2009400 {
> +			compatible = "allwinner,sun20i-d1-ths";
> +			reg = <0x02009400 0x400>;
> +			interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_THS>;
> +			clock-names = "bus";
> +			resets = <&ccu RST_BUS_THS>;
> +			nvmem-cells = <&ths_calibration>;
> +			nvmem-cell-names = "calibration";
> +			status = "disabled";

Any reason this is disabled? We typically don't disable those internal
devices in the SoC .dtsi, the THS is one example (check the instances
in other SoCs' .dtsi files).

The rest looks alright, compared to the manual, so with this line
removed:

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> +			#thermal-sensor-cells = <0>;
> +		};
> +
>  		dmic: dmic@2031000 {
>  			compatible = "allwinner,sun20i-d1-dmic",
>  				     "allwinner,sun50i-h6-dmic";
> @@ -415,6 +428,10 @@ sid: efuse@3006000 {
>  			reg = <0x3006000 0x1000>;
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> +
> +			ths_calibration: thermal-sensor-calibration@14 {
> +				reg = <0x14 0x4>;
> +			};
>  		};
>  
>  		crypto: crypto@3040000 {
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 5a9d7f5a75b4..6f5427d9cfbf 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -166,6 +166,19 @@  gpadc: adc@2009000 {
 			#io-channel-cells = <1>;
 		};
 
+		ths: thermal-sensor@2009400 {
+			compatible = "allwinner,sun20i-d1-ths";
+			reg = <0x02009400 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			status = "disabled";
+			#thermal-sensor-cells = <0>;
+		};
+
 		dmic: dmic@2031000 {
 			compatible = "allwinner,sun20i-d1-dmic",
 				     "allwinner,sun50i-h6-dmic";
@@ -415,6 +428,10 @@  sid: efuse@3006000 {
 			reg = <0x3006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x4>;
+			};
 		};
 
 		crypto: crypto@3040000 {