| Message ID | 20231216040723.17864-1-cnsztl@gmail.com |
|---|---|
| State | Accepted |
| Commit | fc5a80a432607d05e85bba37971712405f75c546 |
| Headers | show |
| Series | arm64: dts: rockchip: configure pad driver strength for orangepi r1 plus lts | expand |
On Sat, 16 Dec 2023 12:07:23 +0800, Tianling Shen wrote: > The default strength is not enough to provide stable connection > under 3.3v LDO voltage. > > Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") > > Applied, thanks! [1/1] arm64: dts: rockchip: configure pad driver strength for orangepi r1 plus lts commit: fc5a80a432607d05e85bba37971712405f75c546 Best regards,
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 5d7d567283e5..4237f2ee8fee 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -26,9 +26,11 @@ yt8531c: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + motorcomm,auto-sleep-disabled; motorcomm,clk-out-frequency-hz = <125000000>; motorcomm,keep-pll-enabled; - motorcomm,auto-sleep-disabled; + motorcomm,rx-clk-drv-microamp = <5020>; + motorcomm,rx-data-drv-microamp = <5020>; pinctrl-0 = <ð_phy_reset_pin>; pinctrl-names = "default";
The default strength is not enough to provide stable connection under 3.3v LDO voltage. Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tianling Shen <cnsztl@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)