| Message ID | 1333115213-28922-1-git-send-email-paul.liu@linaro.org |
|---|---|
| State | Changes Requested |
| Headers | show |
On Fri, Mar 30, 2012 at 09:46:53PM +0800, Ying-Chun Liu (PaulLiu) wrote: > From: "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org> > > Add anatop regulators to imx6q.dtsi for all imx6q platforms. > > Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> > Signed-off-by: Richard Zhao <richard.zhao@linaro.org> > Cc: Shawn Guo <shawn.guo@linaro.org> > --- > arch/arm/boot/dts/imx6q.dtsi | 86 ++++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 86 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi > index 263e8f3..79f59e7 100644 > --- a/arch/arm/boot/dts/imx6q.dtsi > +++ b/arch/arm/boot/dts/imx6q.dtsi > @@ -346,6 +346,92 @@ > compatible = "fsl,imx6q-anatop"; > reg = <0x020c8000 0x1000>; > interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; > + #address-cells = <1>; > + #size-cells = <0>; These two lines are not needed now. Removed them and applied the patch. Thanks. Regards, Shawn > + > + regulator-1p1@110 { > + compatible = "fsl,anatop-regulator"; > + regulator-name = "vdd1p1"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1375000>; > + regulator-always-on; > + anatop-reg-offset = <0x110>; > + anatop-vol-bit-shift = <8>; > + anatop-vol-bit-width = <5>; > + anatop-min-bit-val = <4>; > + anatop-min-voltage = <800000>; > + anatop-max-voltage = <1375000>; > + }; > + > + regulator-3p0@120 { > + compatible = "fsl,anatop-regulator"; > + regulator-name = "vdd3p0"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3150000>; > + regulator-always-on; > + anatop-reg-offset = <0x120>; > + anatop-vol-bit-shift = <8>; > + anatop-vol-bit-width = <5>; > + anatop-min-bit-val = <0>; > + anatop-min-voltage = <2625000>; > + anatop-max-voltage = <3400000>; > + }; > + > + regulator-2p5@130 { > + compatible = "fsl,anatop-regulator"; > + regulator-name = "vdd2p5"; > + regulator-min-microvolt = <2000000>; > + regulator-max-microvolt = <2750000>; > + regulator-always-on; > + anatop-reg-offset = <0x130>; > + anatop-vol-bit-shift = <8>; > + anatop-vol-bit-width = <5>; > + anatop-min-bit-val = <0>; > + anatop-min-voltage = <2000000>; > + anatop-max-voltage = <2750000>; > + }; > + > + regulator-vddcore@140 { > + compatible = "fsl,anatop-regulator"; > + regulator-name = "cpu"; > + regulator-min-microvolt = <725000>; > + regulator-max-microvolt = <1450000>; > + regulator-always-on; > + anatop-reg-offset = <0x140>; > + anatop-vol-bit-shift = <0>; > + anatop-vol-bit-width = <5>; > + anatop-min-bit-val = <1>; > + anatop-min-voltage = <725000>; > + anatop-max-voltage = <1450000>; > + }; > + > + regulator-vddpu@140 { > + compatible = "fsl,anatop-regulator"; > + regulator-name = "vddpu"; > + regulator-min-microvolt = <725000>; > + regulator-max-microvolt = <1450000>; > + regulator-always-on; > + anatop-reg-offset = <0x140>; > + anatop-vol-bit-shift = <9>; > + anatop-vol-bit-width = <5>; > + anatop-min-bit-val = <1>; > + anatop-min-voltage = <725000>; > + anatop-max-voltage = <1450000>; > + }; > + > + regulator-vddsoc@140 { > + compatible = "fsl,anatop-regulator"; > + regulator-name = "vddsoc"; > + regulator-min-microvolt = <725000>; > + regulator-max-microvolt = <1450000>; > + regulator-always-on; > + anatop-reg-offset = <0x140>; > + anatop-vol-bit-shift = <18>; > + anatop-vol-bit-width = <5>; > + anatop-min-bit-val = <1>; > + anatop-min-voltage = <725000>; > + anatop-max-voltage = <1450000>; > + }; > }; > > usbphy@020c9000 { /* USBPHY1 */ > -- > 1.7.9.1 >
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 263e8f3..79f59e7 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -346,6 +346,92 @@ compatible = "fsl,imx6q-anatop"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + #address-cells = <1>; + #size-cells = <0>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2000000>; + anatop-max-voltage = <2750000>; + }; + + regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + regulator-vddpu@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; }; usbphy@020c9000 { /* USBPHY1 */