@@ -323,6 +323,7 @@ struct sc16is7xx_one_config {
struct sc16is7xx_one {
struct uart_port port;
struct regmap *regmap;
+ struct mutex efr_lock; /* EFR registers access */
struct kthread_work tx_work;
struct kthread_work reg_work;
struct kthread_delayed_work ms_work;
@@ -342,7 +343,6 @@ struct sc16is7xx_port {
unsigned char buf[SC16IS7XX_FIFO_SIZE];
struct kthread_worker kworker;
struct task_struct *kworker_task;
- struct mutex efr_lock;
struct sc16is7xx_one p[];
};
@@ -494,7 +494,6 @@ static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg)
static int sc16is7xx_set_baud(struct uart_port *port, int baud)
{
- struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
u8 lcr;
u8 prescaler = 0;
@@ -518,7 +517,7 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
* because the bulk of the interrupt processing is run as a workqueue
* job in thread context.
*/
- mutex_lock(&s->efr_lock);
+ mutex_lock(&one->efr_lock);
lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
@@ -537,7 +536,7 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
/* Put LCR back to the normal mode */
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
- mutex_unlock(&s->efr_lock);
+ mutex_unlock(&one->efr_lock);
sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
SC16IS7XX_MCR_CLKSEL_BIT,
@@ -705,11 +704,10 @@ static unsigned int sc16is7xx_get_hwmctrl(struct uart_port *port)
static void sc16is7xx_update_mlines(struct sc16is7xx_one *one)
{
struct uart_port *port = &one->port;
- struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
unsigned long flags;
unsigned int status, changed;
- lockdep_assert_held_once(&s->efr_lock);
+ lockdep_assert_held_once(&one->efr_lock);
status = sc16is7xx_get_hwmctrl(port);
changed = status ^ one->old_mctrl;
@@ -735,15 +733,20 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one)
static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
{
+ bool rc = true;
struct uart_port *port = &s->p[portno].port;
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+ mutex_lock(&one->efr_lock);
do {
unsigned int iir, rxlen;
- struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
- if (iir & SC16IS7XX_IIR_NO_INT_BIT)
- return false;
+ if (iir & SC16IS7XX_IIR_NO_INT_BIT) {
+ rc = false;
+ goto out_port_irq;
+ }
iir &= SC16IS7XX_IIR_ID_MASK;
@@ -783,15 +786,17 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
break;
}
} while (0);
- return true;
+
+out_port_irq:
+ mutex_unlock(&one->efr_lock);
+
+ return rc;
}
static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
{
struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
- mutex_lock(&s->efr_lock);
-
while (1) {
bool keep_polling = false;
int i;
@@ -802,24 +807,22 @@ static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
break;
}
- mutex_unlock(&s->efr_lock);
-
return IRQ_HANDLED;
}
static void sc16is7xx_tx_proc(struct kthread_work *ws)
{
struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port);
- struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
unsigned long flags;
if ((port->rs485.flags & SER_RS485_ENABLED) &&
(port->rs485.delay_rts_before_send > 0))
msleep(port->rs485.delay_rts_before_send);
- mutex_lock(&s->efr_lock);
+ mutex_lock(&one->efr_lock);
sc16is7xx_handle_tx(port);
- mutex_unlock(&s->efr_lock);
+ mutex_unlock(&one->efr_lock);
uart_port_lock_irqsave(port, &flags);
sc16is7xx_ier_set(port, SC16IS7XX_IER_THRI_BIT);
@@ -926,9 +929,9 @@ static void sc16is7xx_ms_proc(struct kthread_work *ws)
struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev);
if (one->port.state) {
- mutex_lock(&s->efr_lock);
+ mutex_lock(&one->efr_lock);
sc16is7xx_update_mlines(one);
- mutex_unlock(&s->efr_lock);
+ mutex_unlock(&one->efr_lock);
kthread_queue_delayed_work(&s->kworker, &one->ms_work, HZ);
}
@@ -1012,7 +1015,6 @@ static void sc16is7xx_set_termios(struct uart_port *port,
struct ktermios *termios,
const struct ktermios *old)
{
- struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
unsigned int lcr, flow = 0;
int baud;
@@ -1071,7 +1073,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;
/* As above, claim the mutex while accessing the EFR. */
- mutex_lock(&s->efr_lock);
+ mutex_lock(&one->efr_lock);
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
SC16IS7XX_LCR_CONF_MODE_B);
@@ -1101,7 +1103,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
/* Update LCR register */
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
- mutex_unlock(&s->efr_lock);
+ mutex_unlock(&one->efr_lock);
/* Get baud rate generator configuration */
baud = uart_get_baud_rate(port, termios, old,
@@ -1535,7 +1537,6 @@ static int sc16is7xx_probe(struct device *dev,
s->devtype = devtype;
dev_set_drvdata(dev, s);
- mutex_init(&s->efr_lock);
kthread_init_worker(&s->kworker);
s->kworker_task = kthread_run(kthread_worker_fn, &s->kworker,
@@ -1578,6 +1579,8 @@ static int sc16is7xx_probe(struct device *dev,
goto out_ports;
}
+ mutex_init(&s->p[i].efr_lock);
+
ret = uart_get_rs485_mode(&s->p[i].port);
if (ret)
goto out_ports;