diff mbox series

[v3,08/14] ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change

Message ID 20231211054730.208588-9-Delphine_CC_Chiu@wiwynn.com
State Superseded
Headers show
Series [v3,01/14] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices | expand

Commit Message

Delphine CC Chiu Dec. 11, 2023, 5:47 a.m. UTC
Revise i2c11 and i2c12 schematic change:
- remove space for adm1272 compatible
- enable interrupt setting for pca9555
- add eeprom for yosemite4 medusa board/BSM use
- remove temperature sensor for yosemite4 schematic change
- add power sensor for power module reading

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 118 ++++++++++++++----
 1 file changed, 93 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index da413325ce30..ccb5ecd8d9a6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -821,41 +821,94 @@  imux29: i2c@1 {
 &i2c11 {
 	status = "okay";
 	power-sensor@10 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
 	power-sensor@12 {
-		compatible = "adi, adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x12>;
 	};
 
-	gpio@20 {
+	gpio_ext1: pca9555@20 {
 		compatible = "nxp,pca9555";
-		reg = <0x20>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
-	};
-
-	gpio@21 {
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"P48V_OCP_GPIO1","P48V_OCP_GPIO2",
+		"P48V_OCP_GPIO3","FAN_BOARD_0_REVISION_0_R",
+		"FAN_BOARD_0_REVISION_1_R","FAN_BOARD_1_REVISION_0_R",
+		"FAN_BOARD_1_REVISION_1_R","RST_MUX_R_N",
+		"RST_LED_CONTROL_FAN_BOARD_0_N","RST_LED_CONTROL_FAN_BOARD_1_N",
+		"RST_IOEXP_FAN_BOARD_0_N","RST_IOEXP_FAN_BOARD_1_N",
+		"PWRGD_LOAD_SWITCH_FAN_BOARD_0_R","PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+		"","";
+	};
+
+	gpio_ext2: pca9555@21 {
 		compatible = "nxp,pca9555";
-		reg = <0x21>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
-	};
-
-	gpio@22 {
+		reg = <0x21>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"DELTA_MODULE_TYPE","VSENSE_ERR_VDROP_R",
+		"EN_P48V_AUX_0","EN_P48V_AUX_1",
+		"MEDUSA_BOARD_REV_0","MEDUSA_BOARD_REV_1",
+		"MEDUSA_BOARD_REV_2","MEDUSA_BOARD_TYPE",
+		"HSC_OCP_SLOT_ODD_GPIO1","HSC_OCP_SLOT_ODD_GPIO2",
+		"HSC_OCP_SLOT_ODD_GPIO3","HSC_OCP_SLOT_EVEN_GPIO1",
+		"HSC_OCP_SLOT_EVEN_GPIO2","HSC_OCP_SLOT_EVEN_GPIO3",
+		"ADC_TYPE_0_R","ADC_TYPE_1_R";
+	};
+
+	gpio_ext3: pca9555@22 {
 		compatible = "nxp,pca9555";
-		reg = <0x22>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
-	};
-
-	gpio@23 {
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"CARD_TYPE_SLOT1","CARD_TYPE_SLOT2",
+		"CARD_TYPE_SLOT3","CARD_TYPE_SLOT4",
+		"CARD_TYPE_SLOT5","CARD_TYPE_SLOT6",
+		"CARD_TYPE_SLOT7","CARD_TYPE_SLOT8",
+		"OC_P48V_HSC_0_N","FLT_P48V_HSC_0_N",
+		"PWRGD_P12V_AUX_1","OC_P48V_HSC_1_N",
+		"FLT_P48V_HSC_1_N","PWRGD_P12V_AUX_1",
+		"MEDUSA_ADC_EFUSE_TYPE_R","P12V_HSC_TYPE";
+	};
+
+	gpio_ext4: pca9555@23 {
 		compatible = "nxp,pca9555";
-		reg = <0x23>;
+		pinctrl-names = "default";
 		gpio-controller;
 		#gpio-cells = <2>;
+		reg = <0x23>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+		"HSC1_ALERT1_R_N","HSC2_ALERT1_R_N",
+		"HSC3_ALERT1_R_N","HSC4_ALERT1_R_N",
+		"HSC5_ALERT1_R_N","HSC6_ALERT1_R_N",
+		"HSC7_ALERT1_R_N","HSC8_ALERT1_R_N",
+		"HSC1_ALERT2_R_N","HSC2_ALERT2_R_N",
+		"HSC3_ALERT2_R_N","HSC4_ALERT2_R_N",
+		"HSC5_ALERT2_R_N","HSC6_ALERT2_R_N",
+		"HSC7_ALERT2_R_N","HSC8_ALERT2_R_N";
+	};
+
+	power-sensor@40 {
+			compatible = "mps,mp5023";
+			reg = <0x40>;
 	};
 
 	temperature-sensor@48 {
@@ -868,19 +921,29 @@  temperature-sensor@49 {
 		reg = <0x49>;
 	};
 
-	temperature-sensor@4a {
-		compatible = "ti,tmp75";
-		reg = <0x4a>;
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
 	};
 
-	temperature-sensor@4b {
-		compatible = "ti,tmp75";
-		reg = <0x4b>;
+	power-sensor@62 {
+		compatible = "pmbus";
+		reg = <0x62>;
 	};
 
-	eeprom@54 {
-		compatible = "atmel,24c256";
-		reg = <0x54>;
+	power-sensor@64 {
+		compatible = "pmbus";
+		reg = <0x64>;
+	};
+
+	power-sensor@65 {
+		compatible = "pmbus";
+		reg = <0x65>;
+	};
+
+	power-sensor@68 {
+		compatible = "pmbus";
+		reg = <0x68>;
 	};
 };
 
@@ -898,6 +961,11 @@  eeprom@50 {
 		reg = <0x50>;
 	};
 
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
 	rtc@6f {
 		compatible = "nuvoton,nct3018y";
 		reg = <0x6f>;