diff mbox series

[3/4] regulator: qcom-rpmh: add support for pm8010 regulators

Message ID 20231211-pm8010-regulator-v1-3-571e05fb4ecc@quicinc.com
State New
Headers show
Series Add pm8010 RPMH regulators for sm8550 boards | expand

Commit Message

Fenglin Wu via B4 Relay Dec. 11, 2023, 3:17 a.m. UTC
From: Fenglin Wu <quic_fenglinw@quicinc.com>

Add RPMH regulators exposed by Qualcomm Technologies, Inc. PM8010
PMIC. It has 7 LDOs with 3 different types, LDO1 - LDO2 are L502
NMOS LDOs, LDO5 and LDO7 are L502 PMOS LDOs, LDO3/LDO4/LDO6 are
L502 PMOS LDO for low noise applications. Also, LDO3 - LDO7 don't
support LPM.

Suggested-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)
diff mbox series

Patch

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 43b45feb02e6..80e304711345 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -511,6 +511,14 @@  static const int pmic_mode_map_pmic5_ldo[REGULATOR_MODE_STANDBY + 1] = {
 	[REGULATOR_MODE_FAST]    = -EINVAL,
 };
 
+static const int pmic_mode_map_pmic5_ldo_hpm[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = -EINVAL,
+	[REGULATOR_MODE_IDLE]    = -EINVAL,
+	[REGULATOR_MODE_NORMAL]  = PMIC5_LDO_MODE_HPM,
+	[REGULATOR_MODE_FAST]    = -EINVAL,
+};
+
 static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
 {
 	unsigned int mode;
@@ -733,6 +741,33 @@  static const struct rpmh_vreg_hw_data pmic5_pldo515_mv = {
 	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
 };
 
+static const struct rpmh_vreg_hw_data pmic5_pldo502 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 256,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo_hpm,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_pldo502ln = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1800000, 0,  2,  200000),
+		REGULATOR_LINEAR_RANGE(2608000, 3,  28, 16000),
+		REGULATOR_LINEAR_RANGE(3104000, 29, 30, 96000),
+		REGULATOR_LINEAR_RANGE(3312000, 31, 31, 0),
+	},
+	.n_linear_ranges = 4,
+	.n_voltages = 32,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo_hpm,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
 static const struct rpmh_vreg_hw_data pmic5_nldo = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_drms_ops,
@@ -759,6 +794,19 @@  static const struct rpmh_vreg_hw_data pmic5_nldo515 = {
 	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
 };
 
+static const struct rpmh_vreg_hw_data pmic5_nldo502 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_ranges = (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(528000, 0, 127, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 128,
+	.hpm_min_load_uA = 30000,
+	.pmic_mode_map = pmic_mode_map_pmic5_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
 static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_ops,
@@ -1210,6 +1258,16 @@  static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pm8010_vreg_data[] = {
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo502,   "vdd-l1-l2"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo502,   "vdd-l1-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_pldo502ln, "vdd-l3-l4"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo502ln, "vdd-l3-l4"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo502,   "vdd-l5"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo502ln, "vdd-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo502,   "vdd-l7"),
+};
+
 static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
 	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
 	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
@@ -1525,6 +1583,10 @@  static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pm8009-1-rpmh-regulators",
 		.data = pm8009_1_vreg_data,
 	},
+	{
+		.compatible = "qcom,pm8010-rpmh-regulators",
+		.data = pm8010_vreg_data,
+	},
 	{
 		.compatible = "qcom,pm8150-rpmh-regulators",
 		.data = pm8150_vreg_data,