| Message ID | 20231208053939.42901-5-anshuman.khandual@arm.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | coresight: Move remaining AMBA ACPI devices into platform driver | expand |
On 12/8/23 11:09, Anshuman Khandual wrote: > Add support for the dynamic replicator device in the platform driver, which > can then be used on ACPI based platforms. This change would now allow > runtime power management for repliacator devices on ACPI based systems. > > The driver would try to enable the APB clock if available. Also, rename the > code to reflect the fact that it now handles both static and dynamic > replicators. > > Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: Sudeep Holla <sudeep.holla@arm.com> > Cc: Suzuki K Poulose <suzuki.poulose@arm.com> > Cc: Mike Leach <mike.leach@linaro.org> > Cc: James Clark <james.clark@arm.com> > Cc: linux-acpi@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > Cc: coresight@lists.linaro.org > Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only > Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes > Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> > --- > Changes in V3: > > - Added commnets for 'drvdata->pclk' > - Used coresight_init_driver()/coresight_remove_driver() helpers instead > - Dropped pm_runtime_put() from replicator_probe() > - Added pm_runtime_put() on success path in dynamic_replicator_probe() > - Added pm_runtime_put() on success/error paths in > replicator_platform_probe() > > drivers/acpi/arm64/amba.c | 1 - > .../coresight/coresight-replicator.c | 81 ++++++++++--------- > 2 files changed, 42 insertions(+), 40 deletions(-) > > diff --git a/drivers/acpi/arm64/amba.c b/drivers/acpi/arm64/amba.c > index 171b5c2c7edd..270f4e3819a2 100644 > --- a/drivers/acpi/arm64/amba.c > +++ b/drivers/acpi/arm64/amba.c > @@ -27,7 +27,6 @@ static const struct acpi_device_id amba_id_list[] = { > {"ARMHC503", 0}, /* ARM CoreSight Debug */ > {"ARMHC979", 0}, /* ARM CoreSight TPIU */ > {"ARMHC97C", 0}, /* ARM CoreSight SoC-400 TMC, SoC-600 ETF/ETB */ > - {"ARMHC98D", 0}, /* ARM CoreSight Dynamic Replicator */ > {"ARMHC9CA", 0}, /* ARM CoreSight CATU */ > {"ARMHC9FF", 0}, /* ARM CoreSight Dynamic Funnel */ > {"", 0}, > diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c > index b6be73034996..125b256cb8db 100644 > --- a/drivers/hwtracing/coresight/coresight-replicator.c > +++ b/drivers/hwtracing/coresight/coresight-replicator.c > @@ -31,6 +31,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); > * @base: memory mapped base address for this component. Also indicates > * whether this one is programmable or not. > * @atclk: optional clock for the core parts of the replicator. > + * @pclk: APB clock if present, otherwise NULL > * @csdev: component vitals needed by the framework > * @spinlock: serialize enable/disable operations. > * @check_idfilter_val: check if the context is lost upon clock removal. > @@ -38,6 +39,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); > struct replicator_drvdata { > void __iomem *base; > struct clk *atclk; > + struct clk *pclk; > struct coresight_device *csdev; > spinlock_t spinlock; > bool check_idfilter_val; > @@ -243,6 +245,10 @@ static int replicator_probe(struct device *dev, struct resource *res) > return ret; > } > > + drvdata->pclk = coresight_get_enable_apb_pclk(dev); > + if (IS_ERR(drvdata->pclk)) > + return -ENODEV; > + > /* > * Map the device base for dynamic-replicator, which has been > * validated by AMBA core > @@ -285,7 +291,6 @@ static int replicator_probe(struct device *dev, struct resource *res) > } > > replicator_reset(drvdata); > - pm_runtime_put(dev); > > out_disable_clk: > if (ret && !IS_ERR_OR_NULL(drvdata->atclk)) > @@ -301,29 +306,31 @@ static int replicator_remove(struct device *dev) > return 0; > } > > -static int static_replicator_probe(struct platform_device *pdev) > +static int replicator_platform_probe(struct platform_device *pdev) > { > + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > int ret; > > pm_runtime_get_noresume(&pdev->dev); > pm_runtime_set_active(&pdev->dev); > pm_runtime_enable(&pdev->dev); > > - /* Static replicators do not have programming base */ > - ret = replicator_probe(&pdev->dev, NULL); > - > - if (ret) { > - pm_runtime_put_noidle(&pdev->dev); > - pm_runtime_disable(&pdev->dev); > - } > + ret = replicator_probe(&pdev->dev, res); > + pm_runtime_put(&pdev->dev); I believe pm_runtime_disable() would still be needed on the error path. Otherwise pm_runtime_enable() will remain unbalanced on this error path when the replicator module could not be loaded. --- a/drivers/hwtracing/coresight/coresight-replicator.c +++ b/drivers/hwtracing/coresight/coresight-replicator.c @@ -317,6 +317,8 @@ static int replicator_platform_probe(struct platform_device *pdev) ret = replicator_probe(&pdev->dev, res); pm_runtime_put(&pdev->dev); + if (ret) + pm_runtime_disable(&pdev->dev); return ret; } Similar constructs in this error path are also required in all other drivers (except cpu debug) as well.
On 11/12/2023 07:51, Anshuman Khandual wrote: > > > On 12/8/23 11:09, Anshuman Khandual wrote: >> Add support for the dynamic replicator device in the platform driver, which >> can then be used on ACPI based platforms. This change would now allow >> runtime power management for repliacator devices on ACPI based systems. >> >> The driver would try to enable the APB clock if available. Also, rename the >> code to reflect the fact that it now handles both static and dynamic >> replicators. >> >> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> >> Cc: Sudeep Holla <sudeep.holla@arm.com> >> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> >> Cc: Mike Leach <mike.leach@linaro.org> >> Cc: James Clark <james.clark@arm.com> >> Cc: linux-acpi@vger.kernel.org >> Cc: linux-arm-kernel@lists.infradead.org >> Cc: linux-kernel@vger.kernel.org >> Cc: coresight@lists.linaro.org >> Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only >> Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes >> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> >> --- >> Changes in V3: >> >> - Added commnets for 'drvdata->pclk' >> - Used coresight_init_driver()/coresight_remove_driver() helpers instead >> - Dropped pm_runtime_put() from replicator_probe() >> - Added pm_runtime_put() on success path in dynamic_replicator_probe() >> - Added pm_runtime_put() on success/error paths in >> replicator_platform_probe() >> >> drivers/acpi/arm64/amba.c | 1 - >> .../coresight/coresight-replicator.c | 81 ++++++++++--------- >> 2 files changed, 42 insertions(+), 40 deletions(-) >> >> diff --git a/drivers/acpi/arm64/amba.c b/drivers/acpi/arm64/amba.c >> index 171b5c2c7edd..270f4e3819a2 100644 >> --- a/drivers/acpi/arm64/amba.c >> +++ b/drivers/acpi/arm64/amba.c >> @@ -27,7 +27,6 @@ static const struct acpi_device_id amba_id_list[] = { >> {"ARMHC503", 0}, /* ARM CoreSight Debug */ >> {"ARMHC979", 0}, /* ARM CoreSight TPIU */ >> {"ARMHC97C", 0}, /* ARM CoreSight SoC-400 TMC, SoC-600 ETF/ETB */ >> - {"ARMHC98D", 0}, /* ARM CoreSight Dynamic Replicator */ >> {"ARMHC9CA", 0}, /* ARM CoreSight CATU */ >> {"ARMHC9FF", 0}, /* ARM CoreSight Dynamic Funnel */ >> {"", 0}, >> diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c >> index b6be73034996..125b256cb8db 100644 >> --- a/drivers/hwtracing/coresight/coresight-replicator.c >> +++ b/drivers/hwtracing/coresight/coresight-replicator.c >> @@ -31,6 +31,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); >> * @base: memory mapped base address for this component. Also indicates >> * whether this one is programmable or not. >> * @atclk: optional clock for the core parts of the replicator. >> + * @pclk: APB clock if present, otherwise NULL >> * @csdev: component vitals needed by the framework >> * @spinlock: serialize enable/disable operations. >> * @check_idfilter_val: check if the context is lost upon clock removal. >> @@ -38,6 +39,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); >> struct replicator_drvdata { >> void __iomem *base; >> struct clk *atclk; >> + struct clk *pclk; >> struct coresight_device *csdev; >> spinlock_t spinlock; >> bool check_idfilter_val; >> @@ -243,6 +245,10 @@ static int replicator_probe(struct device *dev, struct resource *res) >> return ret; >> } >> >> + drvdata->pclk = coresight_get_enable_apb_pclk(dev); >> + if (IS_ERR(drvdata->pclk)) >> + return -ENODEV; >> + >> /* >> * Map the device base for dynamic-replicator, which has been >> * validated by AMBA core >> @@ -285,7 +291,6 @@ static int replicator_probe(struct device *dev, struct resource *res) >> } >> >> replicator_reset(drvdata); >> - pm_runtime_put(dev); >> >> out_disable_clk: >> if (ret && !IS_ERR_OR_NULL(drvdata->atclk)) >> @@ -301,29 +306,31 @@ static int replicator_remove(struct device *dev) >> return 0; >> } >> >> -static int static_replicator_probe(struct platform_device *pdev) >> +static int replicator_platform_probe(struct platform_device *pdev) >> { >> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> int ret; >> >> pm_runtime_get_noresume(&pdev->dev); >> pm_runtime_set_active(&pdev->dev); >> pm_runtime_enable(&pdev->dev); >> >> - /* Static replicators do not have programming base */ >> - ret = replicator_probe(&pdev->dev, NULL); >> - >> - if (ret) { >> - pm_runtime_put_noidle(&pdev->dev); >> - pm_runtime_disable(&pdev->dev); >> - } >> + ret = replicator_probe(&pdev->dev, res); >> + pm_runtime_put(&pdev->dev); > > I believe pm_runtime_disable() would still be needed on the error path. Otherwise > pm_runtime_enable() will remain unbalanced on this error path when the replicator > module could not be loaded. > > --- a/drivers/hwtracing/coresight/coresight-replicator.c > +++ b/drivers/hwtracing/coresight/coresight-replicator.c > @@ -317,6 +317,8 @@ static int replicator_platform_probe(struct platform_device *pdev) > > ret = replicator_probe(&pdev->dev, res); > pm_runtime_put(&pdev->dev); > + if (ret) > + pm_runtime_disable(&pdev->dev); > > return ret; > } > > Similar constructs in this error path are also required in all other drivers (except > cpu debug) as well. Would that not need to be done as a fixes commit first with more detail about the issue if that's true? Maybe simulate the error and paste any error logs. For example etm4 already has this: pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = etm4_probe(&pdev->dev); pm_runtime_put(&pdev->dev); I'm wondering if the disable is already covered by the platform code if the probe fails so no change is required? if (drv->probe) { ret = drv->probe(dev); if (ret) dev_pm_domain_detach(_dev, true); }
On 12/11/23 15:42, James Clark wrote: > > > On 11/12/2023 07:51, Anshuman Khandual wrote: >> >> >> On 12/8/23 11:09, Anshuman Khandual wrote: >>> Add support for the dynamic replicator device in the platform driver, which >>> can then be used on ACPI based platforms. This change would now allow >>> runtime power management for repliacator devices on ACPI based systems. >>> >>> The driver would try to enable the APB clock if available. Also, rename the >>> code to reflect the fact that it now handles both static and dynamic >>> replicators. >>> >>> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> >>> Cc: Sudeep Holla <sudeep.holla@arm.com> >>> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> >>> Cc: Mike Leach <mike.leach@linaro.org> >>> Cc: James Clark <james.clark@arm.com> >>> Cc: linux-acpi@vger.kernel.org >>> Cc: linux-arm-kernel@lists.infradead.org >>> Cc: linux-kernel@vger.kernel.org >>> Cc: coresight@lists.linaro.org >>> Tested-by: Sudeep Holla <sudeep.holla@arm.com> # Boot and driver probe only >>> Acked-by: Sudeep Holla <sudeep.holla@arm.com> # For ACPI related changes >>> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> >>> --- >>> Changes in V3: >>> >>> - Added commnets for 'drvdata->pclk' >>> - Used coresight_init_driver()/coresight_remove_driver() helpers instead >>> - Dropped pm_runtime_put() from replicator_probe() >>> - Added pm_runtime_put() on success path in dynamic_replicator_probe() >>> - Added pm_runtime_put() on success/error paths in >>> replicator_platform_probe() >>> >>> drivers/acpi/arm64/amba.c | 1 - >>> .../coresight/coresight-replicator.c | 81 ++++++++++--------- >>> 2 files changed, 42 insertions(+), 40 deletions(-) >>> >>> diff --git a/drivers/acpi/arm64/amba.c b/drivers/acpi/arm64/amba.c >>> index 171b5c2c7edd..270f4e3819a2 100644 >>> --- a/drivers/acpi/arm64/amba.c >>> +++ b/drivers/acpi/arm64/amba.c >>> @@ -27,7 +27,6 @@ static const struct acpi_device_id amba_id_list[] = { >>> {"ARMHC503", 0}, /* ARM CoreSight Debug */ >>> {"ARMHC979", 0}, /* ARM CoreSight TPIU */ >>> {"ARMHC97C", 0}, /* ARM CoreSight SoC-400 TMC, SoC-600 ETF/ETB */ >>> - {"ARMHC98D", 0}, /* ARM CoreSight Dynamic Replicator */ >>> {"ARMHC9CA", 0}, /* ARM CoreSight CATU */ >>> {"ARMHC9FF", 0}, /* ARM CoreSight Dynamic Funnel */ >>> {"", 0}, >>> diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c >>> index b6be73034996..125b256cb8db 100644 >>> --- a/drivers/hwtracing/coresight/coresight-replicator.c >>> +++ b/drivers/hwtracing/coresight/coresight-replicator.c >>> @@ -31,6 +31,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); >>> * @base: memory mapped base address for this component. Also indicates >>> * whether this one is programmable or not. >>> * @atclk: optional clock for the core parts of the replicator. >>> + * @pclk: APB clock if present, otherwise NULL >>> * @csdev: component vitals needed by the framework >>> * @spinlock: serialize enable/disable operations. >>> * @check_idfilter_val: check if the context is lost upon clock removal. >>> @@ -38,6 +39,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); >>> struct replicator_drvdata { >>> void __iomem *base; >>> struct clk *atclk; >>> + struct clk *pclk; >>> struct coresight_device *csdev; >>> spinlock_t spinlock; >>> bool check_idfilter_val; >>> @@ -243,6 +245,10 @@ static int replicator_probe(struct device *dev, struct resource *res) >>> return ret; >>> } >>> >>> + drvdata->pclk = coresight_get_enable_apb_pclk(dev); >>> + if (IS_ERR(drvdata->pclk)) >>> + return -ENODEV; >>> + >>> /* >>> * Map the device base for dynamic-replicator, which has been >>> * validated by AMBA core >>> @@ -285,7 +291,6 @@ static int replicator_probe(struct device *dev, struct resource *res) >>> } >>> >>> replicator_reset(drvdata); >>> - pm_runtime_put(dev); >>> >>> out_disable_clk: >>> if (ret && !IS_ERR_OR_NULL(drvdata->atclk)) >>> @@ -301,29 +306,31 @@ static int replicator_remove(struct device *dev) >>> return 0; >>> } >>> >>> -static int static_replicator_probe(struct platform_device *pdev) >>> +static int replicator_platform_probe(struct platform_device *pdev) >>> { >>> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> int ret; >>> >>> pm_runtime_get_noresume(&pdev->dev); >>> pm_runtime_set_active(&pdev->dev); >>> pm_runtime_enable(&pdev->dev); >>> >>> - /* Static replicators do not have programming base */ >>> - ret = replicator_probe(&pdev->dev, NULL); >>> - >>> - if (ret) { >>> - pm_runtime_put_noidle(&pdev->dev); >>> - pm_runtime_disable(&pdev->dev); >>> - } >>> + ret = replicator_probe(&pdev->dev, res); >>> + pm_runtime_put(&pdev->dev); >> >> I believe pm_runtime_disable() would still be needed on the error path. Otherwise >> pm_runtime_enable() will remain unbalanced on this error path when the replicator >> module could not be loaded. >> >> --- a/drivers/hwtracing/coresight/coresight-replicator.c >> +++ b/drivers/hwtracing/coresight/coresight-replicator.c >> @@ -317,6 +317,8 @@ static int replicator_platform_probe(struct platform_device *pdev) >> >> ret = replicator_probe(&pdev->dev, res); >> pm_runtime_put(&pdev->dev); >> + if (ret) >> + pm_runtime_disable(&pdev->dev); >> >> return ret; >> } >> >> Similar constructs in this error path are also required in all other drivers (except >> cpu debug) as well. > > Would that not need to be done as a fixes commit first with more detail > about the issue if that's true? Maybe simulate the error and paste any > error logs. For example etm4 already has this: There are existing inconsistencies e.g between etm4 and replicator regarding whether pm_runtime_disable() is called or not. So the idea here was to get all remaining devices in line with replicator and debug devices method. I don't have continuous access to an ACPI based coresight platform, creating some challenges - although still trying to get access to such a system. But wondering - it might be possible to simulate these success and error paths, without having real ACPI based coresight platform devices. > > pm_runtime_get_noresume(&pdev->dev); > pm_runtime_set_active(&pdev->dev); > pm_runtime_enable(&pdev->dev); > > ret = etm4_probe(&pdev->dev); > > pm_runtime_put(&pdev->dev); > > I'm wondering if the disable is already covered by the platform code if > the probe fails so no change is required? AFAICT pm_runtime_enable()/pm_runtime_disable() goes in a pair for them to remain balanced, there is a increasing/decreasing counter to ensure such a balance is established and so without a corresponding pm_runtime_disable() above etm4 path looks problematic. I guess this might just need fixing, as a pre-requisite. > > if (drv->probe) { > ret = drv->probe(dev); > if (ret) > dev_pm_domain_detach(_dev, true); > }
diff --git a/drivers/acpi/arm64/amba.c b/drivers/acpi/arm64/amba.c index 171b5c2c7edd..270f4e3819a2 100644 --- a/drivers/acpi/arm64/amba.c +++ b/drivers/acpi/arm64/amba.c @@ -27,7 +27,6 @@ static const struct acpi_device_id amba_id_list[] = { {"ARMHC503", 0}, /* ARM CoreSight Debug */ {"ARMHC979", 0}, /* ARM CoreSight TPIU */ {"ARMHC97C", 0}, /* ARM CoreSight SoC-400 TMC, SoC-600 ETF/ETB */ - {"ARMHC98D", 0}, /* ARM CoreSight Dynamic Replicator */ {"ARMHC9CA", 0}, /* ARM CoreSight CATU */ {"ARMHC9FF", 0}, /* ARM CoreSight Dynamic Funnel */ {"", 0}, diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c index b6be73034996..125b256cb8db 100644 --- a/drivers/hwtracing/coresight/coresight-replicator.c +++ b/drivers/hwtracing/coresight/coresight-replicator.c @@ -31,6 +31,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); * @base: memory mapped base address for this component. Also indicates * whether this one is programmable or not. * @atclk: optional clock for the core parts of the replicator. + * @pclk: APB clock if present, otherwise NULL * @csdev: component vitals needed by the framework * @spinlock: serialize enable/disable operations. * @check_idfilter_val: check if the context is lost upon clock removal. @@ -38,6 +39,7 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator"); struct replicator_drvdata { void __iomem *base; struct clk *atclk; + struct clk *pclk; struct coresight_device *csdev; spinlock_t spinlock; bool check_idfilter_val; @@ -243,6 +245,10 @@ static int replicator_probe(struct device *dev, struct resource *res) return ret; } + drvdata->pclk = coresight_get_enable_apb_pclk(dev); + if (IS_ERR(drvdata->pclk)) + return -ENODEV; + /* * Map the device base for dynamic-replicator, which has been * validated by AMBA core @@ -285,7 +291,6 @@ static int replicator_probe(struct device *dev, struct resource *res) } replicator_reset(drvdata); - pm_runtime_put(dev); out_disable_clk: if (ret && !IS_ERR_OR_NULL(drvdata->atclk)) @@ -301,29 +306,31 @@ static int replicator_remove(struct device *dev) return 0; } -static int static_replicator_probe(struct platform_device *pdev) +static int replicator_platform_probe(struct platform_device *pdev) { + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); int ret; pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); - /* Static replicators do not have programming base */ - ret = replicator_probe(&pdev->dev, NULL); - - if (ret) { - pm_runtime_put_noidle(&pdev->dev); - pm_runtime_disable(&pdev->dev); - } + ret = replicator_probe(&pdev->dev, res); + pm_runtime_put(&pdev->dev); return ret; } -static int static_replicator_remove(struct platform_device *pdev) +static int replicator_platform_remove(struct platform_device *pdev) { - replicator_remove(&pdev->dev); + struct replicator_drvdata *drvdata = dev_get_drvdata(&pdev->dev); + + if (drvdata) + replicator_remove(&pdev->dev); + pm_runtime_disable(&pdev->dev); + if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk)) + clk_put(drvdata->pclk); return 0; } @@ -335,6 +342,8 @@ static int replicator_runtime_suspend(struct device *dev) if (drvdata && !IS_ERR(drvdata->atclk)) clk_disable_unprepare(drvdata->atclk); + if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk)) + clk_disable_unprepare(drvdata->pclk); return 0; } @@ -345,6 +354,8 @@ static int replicator_runtime_resume(struct device *dev) if (drvdata && !IS_ERR(drvdata->atclk)) clk_prepare_enable(drvdata->atclk); + if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk)) + clk_prepare_enable(drvdata->pclk); return 0; } #endif @@ -354,31 +365,32 @@ static const struct dev_pm_ops replicator_dev_pm_ops = { replicator_runtime_resume, NULL) }; -static const struct of_device_id static_replicator_match[] = { +static const struct of_device_id replicator_match[] = { {.compatible = "arm,coresight-replicator"}, {.compatible = "arm,coresight-static-replicator"}, {} }; -MODULE_DEVICE_TABLE(of, static_replicator_match); +MODULE_DEVICE_TABLE(of, replicator_match); #ifdef CONFIG_ACPI -static const struct acpi_device_id static_replicator_acpi_ids[] = { +static const struct acpi_device_id replicator_acpi_ids[] = { {"ARMHC985", 0}, /* ARM CoreSight Static Replicator */ + {"ARMHC98D", 0}, /* ARM CoreSight Dynamic Replicator */ {} }; -MODULE_DEVICE_TABLE(acpi, static_replicator_acpi_ids); +MODULE_DEVICE_TABLE(acpi, replicator_acpi_ids); #endif -static struct platform_driver static_replicator_driver = { - .probe = static_replicator_probe, - .remove = static_replicator_remove, +static struct platform_driver replicator_driver = { + .probe = replicator_platform_probe, + .remove = replicator_platform_remove, .driver = { - .name = "coresight-static-replicator", + .name = "coresight-replicator", /* THIS_MODULE is taken care of by platform_driver_register() */ - .of_match_table = of_match_ptr(static_replicator_match), - .acpi_match_table = ACPI_PTR(static_replicator_acpi_ids), + .of_match_table = of_match_ptr(replicator_match), + .acpi_match_table = ACPI_PTR(replicator_acpi_ids), .pm = &replicator_dev_pm_ops, .suppress_bind_attrs = true, }, @@ -387,7 +399,13 @@ static struct platform_driver static_replicator_driver = { static int dynamic_replicator_probe(struct amba_device *adev, const struct amba_id *id) { - return replicator_probe(&adev->dev, &adev->res); + int ret; + + ret = replicator_probe(&adev->dev, &adev->res); + if (!ret) + pm_runtime_put(&adev->dev); + + return ret; } static void dynamic_replicator_remove(struct amba_device *adev) @@ -417,27 +435,12 @@ static struct amba_driver dynamic_replicator_driver = { static int __init replicator_init(void) { - int ret; - - ret = platform_driver_register(&static_replicator_driver); - if (ret) { - pr_info("Error registering platform driver\n"); - return ret; - } - - ret = amba_driver_register(&dynamic_replicator_driver); - if (ret) { - pr_info("Error registering amba driver\n"); - platform_driver_unregister(&static_replicator_driver); - } - - return ret; + return coresight_init_driver("replicator", &dynamic_replicator_driver, &replicator_driver); } static void __exit replicator_exit(void) { - platform_driver_unregister(&static_replicator_driver); - amba_driver_unregister(&dynamic_replicator_driver); + coresight_remove_driver(&dynamic_replicator_driver, &replicator_driver); } module_init(replicator_init);