@@ -360,18 +360,19 @@ static int dw8250_probe(struct platform_device *pdev)
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
int irq = platform_get_irq(pdev, 0);
struct uart_port *p = &uart.port;
+ struct device *dev = &pdev->dev;
struct dw8250_data *data;
int err;
u32 val;
if (!regs) {
- dev_err(&pdev->dev, "no registers defined\n");
+ dev_err(dev, "no registers defined\n");
return -EINVAL;
}
if (irq < 0) {
if (irq != -EPROBE_DEFER)
- dev_err(&pdev->dev, "cannot get irq\n");
+ dev_err(dev, "cannot get irq\n");
return irq;
}
@@ -382,16 +383,16 @@ static int dw8250_probe(struct platform_device *pdev)
p->pm = dw8250_do_pm;
p->type = PORT_8250;
p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
- p->dev = &pdev->dev;
+ p->dev = dev;
p->iotype = UPIO_MEM;
p->serial_in = dw8250_serial_in;
p->serial_out = dw8250_serial_out;
- p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+ p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
if (!p->membase)
return -ENOMEM;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -399,57 +400,57 @@ static int dw8250_probe(struct platform_device *pdev)
data->usr_reg = DW_UART_USR;
p->private_data = data;
- data->uart_16550_compatible = device_property_read_bool(p->dev,
+ data->uart_16550_compatible = device_property_read_bool(dev,
"snps,uart-16550-compatible");
- err = device_property_read_u32(p->dev, "reg-shift", &val);
+ err = device_property_read_u32(dev, "reg-shift", &val);
if (!err)
p->regshift = val;
- err = device_property_read_u32(p->dev, "reg-io-width", &val);
+ err = device_property_read_u32(dev, "reg-io-width", &val);
if (!err && val == 4) {
p->iotype = UPIO_MEM32;
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
}
- if (device_property_read_bool(p->dev, "dcd-override")) {
+ if (device_property_read_bool(dev, "dcd-override")) {
/* Always report DCD as active */
data->msr_mask_on |= UART_MSR_DCD;
data->msr_mask_off |= UART_MSR_DDCD;
}
- if (device_property_read_bool(p->dev, "dsr-override")) {
+ if (device_property_read_bool(dev, "dsr-override")) {
/* Always report DSR as active */
data->msr_mask_on |= UART_MSR_DSR;
data->msr_mask_off |= UART_MSR_DDSR;
}
- if (device_property_read_bool(p->dev, "cts-override")) {
+ if (device_property_read_bool(dev, "cts-override")) {
/* Always report CTS as active */
data->msr_mask_on |= UART_MSR_CTS;
data->msr_mask_off |= UART_MSR_DCTS;
}
- if (device_property_read_bool(p->dev, "ri-override")) {
+ if (device_property_read_bool(dev, "ri-override")) {
/* Always report Ring indicator as inactive */
data->msr_mask_off |= UART_MSR_RI;
data->msr_mask_off |= UART_MSR_TERI;
}
/* Always ask for fixed clock rate from a property. */
- device_property_read_u32(p->dev, "clock-frequency", &p->uartclk);
+ device_property_read_u32(dev, "clock-frequency", &p->uartclk);
/* If there is separate baudclk, get the rate from it. */
- data->clk = devm_clk_get(&pdev->dev, "baudclk");
+ data->clk = devm_clk_get(dev, "baudclk");
if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER)
- data->clk = devm_clk_get(&pdev->dev, NULL);
+ data->clk = devm_clk_get(dev, NULL);
if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
if (!IS_ERR_OR_NULL(data->clk)) {
err = clk_prepare_enable(data->clk);
if (err)
- dev_warn(&pdev->dev, "could not enable optional baudclk: %d\n",
+ dev_warn(dev, "could not enable optional baudclk: %d\n",
err);
else
p->uartclk = clk_get_rate(data->clk);
@@ -457,11 +458,11 @@ static int dw8250_probe(struct platform_device *pdev)
/* If no clock rate is defined, fail. */
if (!p->uartclk) {
- dev_err(&pdev->dev, "clock rate not defined\n");
+ dev_err(dev, "clock rate not defined\n");
return -EINVAL;
}
- data->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
+ data->pclk = devm_clk_get(dev, "apb_pclk");
if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) {
err = -EPROBE_DEFER;
goto err_clk;
@@ -469,12 +470,12 @@ static int dw8250_probe(struct platform_device *pdev)
if (!IS_ERR(data->pclk)) {
err = clk_prepare_enable(data->pclk);
if (err) {
- dev_err(&pdev->dev, "could not enable apb_pclk\n");
+ dev_err(dev, "could not enable apb_pclk\n");
goto err_clk;
}
}
- data->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
+ data->rst = devm_reset_control_get_optional(dev, NULL);
if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) {
err = -EPROBE_DEFER;
goto err_pclk;
@@ -506,8 +507,8 @@ static int dw8250_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
return 0;